
Harp.device.lickety split
AllenNeuralDynamics/harp.device.lickety-split
0360: an ephys-compliant capacitive lick detector
Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

AllenNeuralDynamics/harp.device.lickety-split
0360: an ephys-compliant capacitive lick detector


jibonaronno/documentsA
It is required to change settings using SCLManager.exe when required for new setup.

QuickLogic-Corp/quick-feather-dev-board
100% open source dev kit for EOS S3 MCU+eFPGA SoC supported by fully open source SDK and FPGA Toolchain

QuickLogic-Corp/qomu-dev-board
100% open source dev kit for EOS S3 MCU+eFPGA SoC supported by fully open source SDK and FPGA Toolchain

antmicro/quickfeather-dev-board
This project contains open hardware design files for the QuickFeather development board based on the QuickLogic EOS S3 Sensor Processing Platform.

RustyCircuit/grid-devkit
KiCad PCB designed to interoperate with the Intech Studio Grid ecosystem. This devkit is a fork of Intech's VSNX hardware design, adapted to fill a gap between fully-developed hardware and breadboard/DIY controller…

Kevinbot-Robotics/stm32h743_can_hs_dev
An STM32H743 development board with on-board USB-HS and CAN-FD (up to 8Mbit/s)

thingino/teacup-neo
Universal Ingenic SoC development platform: one carrier + per-SoC interposer modules (T10 through A1, any package) on a DDR4 card edge, with an ESP32-S3 BMC for autonomous LLM-driven development.

Miceuz/paper-wifi
Low power E-paper display devboard with WiFi and BLE connectivity. Open source hardware.


mirabelmensah/TPL-OSHW
This repository contains the open-source PCB designs for a custom cryogenic feedthrough system developed for the CS204-DMX-20 cryostat.

AllenNeuralDynamics/harp.device.sniff-detector
0382: Signal conditioning board for an implanted thermistor

AllenNeuralDynamics/harp.device.pico-template
an RP2040-based Harp hardware/firmware project template

AllenNeuralDynamics/harp.device.valve-controller
0368: a 16-channel valve controller

MicroLind-Developers/microlind-hw
Hardware repository for the microlind project

MicroLind-Developers/microlind-hw
Hardware repository for the microlind project

Stefan-Olt/MISRC
MISRC Is a multi channel RF capture device for FM RF, S-Video, CVBS RAW capture and anything else, but intended and supported for the decode family of projects vhs-decode, ld-decode, hifi-decode.

geezacoleman/owl-driver-board
Development of a board that receives GPIO input and allows on/off control of connected solenoids.

antmicro/raspberry-pi-cm4-csi-adapter
This repository contains open hardware design files for an adapter board allowing to connect video accessories developed by Antmicro to a Raspberry Pi CM4 IO Board over a 22-pin FFC connector.


azonenberg/stm32mp2-baremetal-tests
Experimenting with bare metal STM32MP2 development


Zmotive/HY_550CJ_Control_board
This Project is still under development and not all features have been tested. As I work through the hardware I will continue to update.