Skip to the content

Boards using the TPS2553DBVR-1

87 boards

Boards in 66 GitHub repositories, designed in KiCad, that use the TPS2553DBVR-1 by Texas Instruments (-40℃~+150℃ 1 1.5A 2.5V~6.5V 85mΩ Active High High Side Switch 过压保护、软启动、欠压锁定、反向电压保护、集成电荷泵、Overcurrent Protection、Over temperature protection、锁存保护、Short-Circuit Protection、反向电流阻断 SOT-23-6 Power Distribution Switches ROHS). See how each wires it, with its parts, size, README and files; the TPS2553DBVR-1’s symbol, footprint and pinout are on its own page.

  • 2 layers192.2 × 150.5 mmDjinn, the printed circuit board in 3D

    Djinn

    tzarc/keyboards

    @tzarc's custom keyboard designs.

    292 parts993CERN-OHL-S-2.0
  • 4 layers137 × 141 mmPcb panel, the printed circuit board in 3D

    Pcb panel

    0xCB-dev/0xCB-1337

    Mechanical macropad with OLED running QMK

    485 parts61
  • 6 layers76 × 56 mmCM4 MANET, the printed circuit board in 3D

    CM4 MANET

    ties1887/Mesh-radio-Halow-LoRa

    Modular mesh radio system using Raspberry Pi + HaLow (802.11ah) + LoRa.

    122 parts40
  • 4 layers53 × 42 mmMioLink, the printed circuit board in 3D

    MioLink

    Misaka0x2730/MioLink

    ARM JTAG/SWD debugger (BlackMagic port) based on RP2040.

    117 parts30GPL-3.0
  • 2 layers69.6 × 37.3 mmController, the printed circuit board in 3D

    Controller

    purdeaandrei/overnumpad_controller_1xb

    An open source replacement keyboard controller for 4th generation IBM/Lexmark keyboards, and for some Unicomp keyboards

    65 parts27
  • 2 layers178 × 711 mmMSAP-2 rev.A SMD, the printed circuit board in 3D

    MSAP-2 rev.A SMD

    mehrantsi/MSAP-2

    An 8-bit computer. Successor to MSAP-1

    658 parts13MIT
  • 4 layers157.5 × 98 mmBeamBender BigBox, the printed circuit board in 3D

    BeamBender BigBox

    kavanoz64/BeamBender-BigBox

    An AGA digital scandoubler and HDMI output card for the Amiga 4000, with Amiga 2000 / 3000 support.

    221 parts12
  • 4 layers51 × 77 mmBODAQS A8 board v1 0, the printed circuit board in 3D

    BODAQS A8 board v1 0

    benconnor1972/BODAQS

    Bicycle Open Data Acquisition System

    120 parts9
  • 4 layers112 × 75 mmKvm board, the printed circuit board in 3D

    Kvm board

    FuNK3Y/picoKVM

    A network KVM that can switch inputs of smart monitors

    95 parts6
  • 2 layers32.6 × 21.1 mmSolenoidDriver, the printed circuit board in 3D

    SolenoidDriver

    purdeaandrei/SolenoidDriver

    Solenoid Driver based on original work by xwhatsit, but using components available for JLCPCB SMT assembly

    29 parts6
  • 4 layers117 × 69.4 mmKINO D4 Carrier A0 2, the printed circuit board in 3D

    KINO D4 Carrier A0 2

    b5463/kino-d4

    Open-source four-lens digital camera with synchronized capture, original-frame storage, and a USB control workbench.

    256 parts4
  • 4 layers94.3 × 81.8 mmYukaLink revA, the printed circuit board in 3D

    YukaLink revA

    Misaka0x2730/YukaLink

    Dual targets USB+ETH ARM JTAG/SWD debugger (BlackMagic port) based on RP2350. JTAG and SWD interfaces are implemented on PIO.

    321 parts3GPL-3.0
  • 2 layers80 × 34 mmDji fcc, the printed circuit board in 3D

    Dji fcc

    nikolaus018/dji-fcc-esp32

    ESP32-S3 firmware that switches a DJI N1 remote to FCC mode over USB (replaces the Android app)

    69 parts3MIT
  • 4 layers116 × 112 mmBldc esc, the printed circuit board in 3D

    Bldc esc

    EwoudVV/bldc-esc

    A custom STM32 motor controller for BLDC and PMSM motors.

    453 parts2
  • 2 layers50.8 × 22.8 mmFt231x uart usb power switch, the printed circuit board in 3D

    Ft231x uart usb power switch

    paulsykes/ft231x_uart_usb_power_switch

    FT231X USB to serial UART breakout with integrated current limited USB power switch.

    59 parts2
  • 2 layersGlasgow revD io wing, the printed circuit board in 3D

    Glasgow revD io wing

    AleksaBjelogrlic/glasgow_revD_io_wing

    Test Board for Glasgow RevD IO Ports

    92 parts1
  • 4 layers52 × 74 mmFRC Sensor CAN, the printed circuit board in 3D

    FRC Sensor CAN

    barkinvar/sugerCANe

    A compact interface for three NPN, PNP or logic sensors on an FRC robot. Each port has a removable 5 V / 12 V power jumper; input type is configured in software.

    144 parts1
  • 4 layers213.4 × 138.9 mmCapstone Project Smart glasses for the visually impaired, the printed circuit board in 3D

    Capstone Project Smart glasses for the visually impaired

    heyitsarthur/Capstone-Project-Smart-glasses-for-the-visually-impaired

    The system operates on a distributed architecture split between a head-mounted sensor array and a chest-mounted compute module. Main Computing Unit: Raspberry Pi Compute Module 4 (CM4) running on a custom PCB.

    197 parts1
  • 2 layers256 × 128 mmM65, the printed circuit board in 3D

    M65

    m-lego/m65

    247 parts1GPL-3.0
  • 2 layers123.6 × 78.9 mmMost listener, the printed circuit board in 3D

    Most listener

    Oleg-mk/MOST25-to-AUDIO

    Passive MOST25 listener: Tang Nano 20K FPGA, ESP32 host, stereo I2S out with the head unit's volume, balance and tone

    172 parts1CERN-OHL-S-2.0
  • 4 layers89.7 × 66 mmLuckfox core3506 adapter, the printed circuit board in 3D

    Luckfox core3506 adapter

    Rufilla/LuckFox-Core3506-Carrier

    A carrier board for the LuckFox 3506 designed in KiCAD 10

    131 parts1Apache-2.0
  • 4 layers90 × 160 mmTool power supply v1, the printed circuit board in 3D

    Tool power supply v1

    UBC-Hacker-Fab/tool-power-supply

    general power supply for tools

    125 parts1
  • 4 layers120 × 50 mmIsolator, the printed circuit board in 3D

    Isolator

    alxgmpr/adum4165-isolator

    73 parts
  • 4 layers51.1 × 40.7 mmKbd nes v2, the printed circuit board in 3D

    Kbd nes v2

    bchelf/keyboard-nes

    Remapping order: Right, Left, Down, Up, A, B, Select, Start

    53 parts