2 layers109.2 × 74.4 mm
2 layers32.6 × 21.1 mm
SolenoidDriver
purdeaandrei/SolenoidDriver6Solenoid Driver based on original work by xwhatsit, but using components available for JLCPCB SMT assembly
- Size
- 32.6 × 21.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 16
- Pads
- 81
- Tracks, vias
- 168, 36
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 30 Sep 2020
- Updated
- 31 Jul 2022
Overview
SolenoidDriver is an open-source printed circuit board by purdeaandrei, from the purdeaandrei/SolenoidDriver repository on GitHub. It is a 2-layer board of 32.6 × 21.1 mm with 29 parts on 16 nets, routed with 168 tracks and 36 vias.
It is built around the FP6291, TPS2553DBVR-1 and ULN2003A. Its parts include 8 capacitors, 8 resistors, 4 connectors, 3 ICs and 2 diodes.
Main components
3
FP6291
SOT-23-61 2.6V~5.5V 2A Boost Boost No SOT-23-6 DC-DC Converters ROHSAdvanced Analog TechnologyDC-DC ConvertersTPS2553DBVR-1
SOT-23-6-40℃~+150℃ 1 1.5A 2.5V~6.5V 85mΩ Active High High Side Switch 过压保护、软启动、欠压锁定、反向电压保护、集成电荷泵、Overcurrent Protection、Over temperature protection、锁存保护、Short-Circuit Protection、反向电流阻断 SOT-23-6 Power Distribution Switches ROHSTexas InstrumentsPower Distribution Switches
ULN2003A
SOP-16-40℃~+85℃ 0.93mA 100uA 15pF 20uA 30V 50V Seven channels SOP-16 Darlington Transistor Arrays ROHSUMWDarlington Transistor Arrays
Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R5, R8 |
| 4 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C4, C8 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C5, C6 |
| 2 | Conn_01x02 | solenoid_driver_footprint_library:shortable | J3, J4 |
| 2 | ToolingHole | solenoid_driver_footprint_library:tooling_hole | H2, H3 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C7 |
| 1 | 220uF | Capacitor_SMD:CP_Elec_6.3x7.7 | C3 |
| 1 | 4.7uH | solenoid_driver_footprint_library:footprint_for_MWSA0503_HANDSOLD | L1 |
| 1 | 470 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4 |
| 1 | 56k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R7 |
| 1 | 62k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3 |
| 1 | 8k2 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R6 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J1 |
| 1 | D_Schottky | Diode_SMD:D_SMA | D2 |
| 1 | FP6291 | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | MountingHole | MountingHole:MountingHole_4mm_Pad | H1 |
| 1 | TPS2553DBVR | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U3 |
| 1 | ULN2003A | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U2 |
Similar boards
- 2 layers100 × 100 mm
- 2 layers140 × 80 mm
- 2 layers192.2 × 150.5 mm
- 4 layers137 × 141 mm
- 6 layers76 × 56 mm
CM4 MANET
ties1887/Mesh-radio-Halow-LoRa
Modular mesh radio system using Raspberry Pi + HaLow (802.11ah) + LoRa.
122 parts40 - 4 layers53 × 42 mm
MioLink
Misaka0x2730/MioLink
ARM JTAG/SWD debugger (BlackMagic port) based on RP2040.
117 parts30GPL-3.0 - 2 layers69.6 × 37.3 mm
Controller
purdeaandrei/overnumpad_controller_1xb
An open source replacement keyboard controller for 4th generation IBM/Lexmark keyboards, and for some Unicomp keyboards
65 parts27
Questions
How big is the SolenoidDriver PCB?
It measures 32.6 × 21.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SolenoidDriver use?
29 parts, built around the FP6291, TPS2553DBVR-1 and ULN2003A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SolenoidDriver KiCad files?
From the purdeaandrei/SolenoidDriver repository on GitHub, at the commit this page was made from: the board is solenoid_driver/solenoid_driver.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the SolenoidDriver design in my own project?
Its repository states no licence, so its author keeps all rights: ask purdeaandrei before reusing the design.