2 layers
2 layers109.2 × 74.4 mm
Flamingo p backups
AronAyub/KICAD7kicad design projects
- Size
- 109.2 × 74.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 112
- Nets
- 97
- Pads
- 299
- Tracks, vias
- 643, 50
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20210623)
- Created
- 3 May 2021
- Updated
- 3 Aug 2023
Overview
Flamingo p backups is an open-source printed circuit board by AronAyub, from the AronAyub/KICAD repository on GitHub. It is a 2-layer board of 109.2 × 74.4 mm with 112 parts on 97 nets, routed with 643 tracks and 50 vias.
It is built around the FP6291 and L7805. Its parts include 30 resistors, 26 diodes, 21 connectors, 10 capacitors and 6 ICs.
Main components
2
FP6291
SOT-23-61 2.6V~5.5V 2A Boost Boost No SOT-23-6 DC-DC Converters ROHSAdvanced Analog TechnologyDC-DC Converters
L7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdKICAD
- **Some Old designs, this is where i began ! **
- kicad design projects
In this repository I have provided my previous KICAD PCB Designs for:
Arduino hat
- this is a complete arduino hat, check the folder for files! it is among my first designs
Breadboard - Power Supply
- most devs use breadborad for their prototyping, learn how to create a breadboard power supply. it is among my first designs
Flamingo Control Board
- this was a client project, he allowed to have it open source. He is from Florida! funny enough he wanted a Flamingo shapped PCB, it is among my first designs
12V 1A input to 3v3 /5V circuit
- this is a simple power supply unit which accepts 12V, 1A and gives, 3V3 and 5V as output, it is among my first designs
LED Matrix Project
- An LED Matrix based PCB using registers, this was implimented practically locally in Kenya.
Raspberry pi Hat project
- mini Pi Hat, one of my old PCB design projects !
Rf 2.45ghz support circuit
- the circuit schematic is in the folder
STRF-Kicad master
- the circuit schematic is in the folder
3-phase circuit
- the circuit schematic is in the folder
Transmitter Circuit
- the circuit schematic is in the folder
Parts
112| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | 220 | Resistor_SMD:R_0805_2012Metric | R10, R11, R12, R13, R14, R15, R16, R17, R19, R20, R21, R22, R23, R24, R25, R26 +3 |
| 11 | H | MountingHole:MountingHole_2.1mm | H, H, H, H, H, H, H, H, H, H, H |
| 6 | B1 | LED_THT:LED_D3.0mm | D6, D9, D12, D16, D19, D22 |
| 6 | G1 | LED_THT:LED_D3.0mm_Clear | D5, D8, D11, D15, D18, D21 |
| 4 | 10nF | Capacitor_SMD:C_1206_3216Metric | C1, C4, C8, C9 |
| 4 | R1 | LED_THT:LED_D3.0mm | D4, D14, D17, D20 |
| 4 | R1 | LED_THT:LED_D3.0mm_Clear | D7, D10, D13, D23 |
| 3 | 1k | Resistor_SMD:R_0805_2012Metric | R1, R3, R30 |
| 2 | 0.1uF | Capacitor_SMD:CP_Elec_4x5.7 | C7, C10 |
| 2 | 0.1uF | Capacitor_SMD:C_1206_3216Metric | C3, C6 |
| 2 | 20uF | Capacitor_SMD:C_1206_3216Metric | C2, C5 |
| 2 | 4017 | Package_DIP:DIP-16_W7.62mm | U4, U5 |
| 2 | RED | LED_SMD:LED_1806_4516Metric_Castellated | D2, D24 |
| 2 | beak | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J4, J5 |
| 2 | bneck | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J9, J12 |
| 2 | body | Connector_JST:JST_EH_B5B-EH-A_1x05_P2.50mm_Vertical | J6, J20 |
| 2 | eye | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | EYE, J22 |
| 2 | neck1 | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J7, J10 |
| 2 | neck2 | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J8, J11 |
| 1 | 1.2k | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | 100k | Potentiometer_THT:Potentiometer_Bourns_3299W_Vertical | RV1 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R29 |
| 1 | 12k | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 220 | Resistor_SMD:R_0603_1608Metric | R18 |
| 1 | 4.7uH | Inductor_THT:L_Radial_D6.0mm_P4.00mm | L1 |
| 1 | 48k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 5.1 | Diode_THT:D_DO-34_SOD68_P7.62mm_Horizontal | D3 |
| 1 | 88k | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | B1 | LED_THT:LED_D5.0mm | D26 |
| 1 | Battery | Battery:BatteryHolder_Keystone_2462_2xAA | BT1 |
| 1 | DIODE | Diode_THT:D_5W_P10.16mm_Horizontal | D25 |
| 1 | FP6291 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | Fuse | Fuse:Fuseholder_TR5_Littelfuse_No560_No460 | F1 |
| 1 | GREEN | LED_SMD:LED_1806_4516Metric_Castellated | D1 |
| 1 | Jack-DC | Connector_BarrelJack:BarrelJack_CUI_PJ-063AH_Horizontal | J2 |
| 1 | L7805 | Package_TO_SOT_SMD:SOT-89-3_Handsoldering | U6 |
| 1 | LM555 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | NTC | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | TH1 |
| 1 | P_SWIP | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Switch_SW_Push | Button_Switch_THT:SW_DIP_SPSTx01_Slide_9.78x4.72mm_W7.62mm_P2.54mm | SW1 |
| 1 | TP4056_BT | Package_SO:HSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.1mm | U2 |
| 1 | USB_A | Connector_USB:USB_Micro-B_Molex_47346-0001 | J1 |
| 1 | f1 | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J17 |
| 1 | f11 | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J13 |
| 1 | f2 | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J18 |
| 1 | f21 | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J14 |
| 1 | f3 | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J19 |
| 1 | f31 | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J15 |
| 1 | f4 | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J21 |
| 1 | f41 | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J16 |
More from AronAyub/KICAD
4- 2 layers165.9 × 148.3 mm
- 2 layers
- 2 layers30.1 × 52.1 mm
Similar boards
- 2 layers32.6 × 21.1 mm
SolenoidDriver
purdeaandrei/SolenoidDriver
Solenoid Driver based on original work by xwhatsit, but using components available for JLCPCB SMT assembly
29 parts6 - 2 layers100 × 100 mm
- 2 layers140 × 80 mm
- 2 layers40.6 × 110 mm
Europi surface mount
Allen-Synthesis/EuroPi
EuroPi: A reprogrammable Eurorack module based on the Raspberry Pi Pico
92 parts584CC0-1.0 - 2 layers132.1 × 45.7 mm
IPoS
peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.
42 parts342 - 2 layers59.7 × 57.5 mm
- 2 layers90.8 × 35.6 mm
ERCF easy brd
Tircown/ERCF-easy-brd
More informations on how to reset for flashing:\ https://wiki.seeedstudio.com/Seeeduino-XIAO/#enter-bootloader-mode
28 parts195GPL-3.0 - 2 layers111.3 × 106.4 mm
Super Sixteen v1
matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer
141 parts171
Questions
How big is the Flamingo p backups PCB?
It measures 109.2 × 74.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Flamingo p backups use?
112 parts, built around the FP6291 and L7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Flamingo p backups KiCad files?
From the AronAyub/KICAD repository on GitHub, at the commit this page was made from: the board is Flamingo cotnrol project/ff/Flamingo p-backups/f.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Flamingo p backups design in my own project?
Its repository states no licence, so its author keeps all rights: ask AronAyub before reusing the design.