
KINO D4 Carrier A0
b5463/kino-d4
Open-source four-lens digital camera with synchronized capture, original-frame storage, and a USB control workbench.

Open-source four-lens digital camera with synchronized capture, original-frame storage, and a USB control workbench.
KINO D4 Carrier A0 2 is an open-source printed circuit board by b5463, from the b5463/kino-d4 repository on GitHub. It is a 4-layer board of 117 × 69.4 mm with 256 parts on 185 nets, routed with 2,385 tracks and 573 vias.
It is built around the TPS2553DBVR-1, BQ25798RQMR and BQ27441DRZR-G1A, with the SS34, AO4409 and PESD5V0S1BA among its other parts. Its parts include 77 capacitors, 69 resistors, 15 connectors, 12 diodes and 11 ICs. It belongs with the interfaces and adapters boards and the ESP32 and RISC-V boards of this library.
Status: Phase 1 architecture baseline — NOT FOR FABRICATION
New proposal (2026-09-28): four directly socketed XIAOs, a matching IDC header, integrated charging and battery retention. This records the revised requirements and first-board additions; the KiCad files below still contain the earlier Phase 1 baseline.
The implemented component capture and P4-sized placement study are now in carrier A0. The files in this directory remain the earlier architecture baseline.
The KiCad 10 workspace for the custom KINO D4 mainboard.
Phase 1 settles the questions that can be settled on paper: how the system divides into sheets, what the measured Guition JP1 header actually carries, what the loads add up to, which power architecture is the candidate, and where parts have to sit. The battery, load and enclosure measurements are still missing, and nothing here claims otherwise.
Open KINO_D4_Mainboard_Rev1.kicad_pro. The root schematic contains the
functional sheet plan. The PCB contains a provisional 117 mm × 70 mm,
four-layer outline and placement-review zones only.
Do not generate fabrication data from this baseline. The board has no released mounting holes, connector coordinates, routed copper or production footprints.
| File | Purpose |
|---|---|
docs/PHASE_1_ARCHITECTURE.md | Architecture, decisions, power analysis and mechanical plan |
docs/INTERFACE_MATRIX.csv | Pin-level interface contract |
docs/POWER_BUDGET.csv | Machine-readable load and source budget |
docs/MAJOR_COMPONENTS.csv | Preferred parts and unresolved selections |
docs/RELEASE_CHECKLIST.md | Evidence required before schematic and manufacturing release |
The measured JP1 map in hardware/changes/ECN-0002-jp1-header-measured.md, as
amended by hardware/changes/ECN-0003-shutter-on-jp1-21.md, is the source for
the controller connector. Firmware constants in
firmware/p4/main/board_d4v1.h and the hardware profile must continue to match
the schematic.
Any change that modifies the externally visible pin map, power behavior, camera harness or enclosure interface requires an ECN before release.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 27 | 100n 50V | Capacitor_SMD:C_0603_1608Metric | C100, C200, C201, C204, C300, C301, C304, C400, C401, C404, C1106, C1110, C1116, C1119, C1205, C1300 +11 |
| 19 | 100k | Resistor_SMD:R_0603_1608Metric | R104, R105, R205, R305, R405, R505, R601, R602, R603, R1000, R1003, R1102, R1203, R1204, R1300, R1301 +3 |
| 14 | 10k | Resistor_SMD:R_0603_1608Metric | R204, R304, R404, R504, R600, R701, R702, R800, R902, R903, R906, R1004, R1110, R1302 |
| 13 | 33 | Resistor_SMD:R_0603_1608Metric | R200, R201, R202, R300, R301, R302, R400, R401, R402, R500, R501, R502, R605 |
| 12 | 10u 50V X7R | Capacitor_SMD:C_1206_3216Metric | C1104, C1105, C1107, C1108, C1109, C1111, C1112, C1113, C1114, C1115, C1117, C1118 |
| 7 | 22u 10V | Capacitor_SMD:C_1206_3216Metric | C1204, C1206, C1207, C1208, C1209, C1210, C1211 |
| 6 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2, FID3, FID4, FID5, FID6 |
| 5 | 1u | Capacitor_SMD:C_0603_1608Metric | C701, C900, C901, C1001, C1002 |
| 5 | 1u 50V | Capacitor_SMD:C_0603_1608Metric | C202, C302, C402, C502, C703 |
| 5 | SS34 | Diode_SMD:D_SMA | D200, D300, D400, D500, D1200 |
| 4 | 0.020 1% 1W | Resistor_SMD:R_1206_3216Metric | RS200, RS300, RS400, RS500 |
| 4 | 0R LINK - REMOVE FOR NODE USB | KINO_A0:R_1206_3216Metric_Vishay_CRCW-HP | JP200, JP300, JP400, JP500 |
| 4 | 22u 10V | Capacitor_SMD:C_0805_2012Metric | C203, C303, C403, C503 |
| 4 | 25.5k 1% | Resistor_SMD:R_0603_1608Metric | R203, R303, R403, R503 |
| 4 | AO4409 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | Q1000, Q1001, Q1200, Q1201 |
| 4 | GPIO breakout - SD/strap restrictions | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J201, J301, J401, J501 |
| 4 | P4 M2 insert mount | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 4 | PESD5V0S1BA | Diode_SMD:D_SOD-323 | D900, D901, D902, D903 |
| 4 | TPS2553DBVR | Package_TO_SOT_SMD:SOT-23-6 | U201, U301, U401, U501 |
| 4 | TXU0304PWR | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U200, U300, U400, U500 |
| 4 | XIAO ESP32-S3 Sense socket | KINO_A0:XIAO_Socket_15.24mm | J200, J300, J400, J500 |
| 3 | 100n | Capacitor_SMD:C_0603_1608Metric | C600, C904, C1203 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric | C902, C1212 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R901, R1002 |
| 2 | 2.2k | Resistor_SMD:R_0603_1608Metric | R100, R1303 |
| 2 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q900, Q1300 |
| 2 | 30.1k 1% | Resistor_SMD:R_0603_1608Metric | R1104, R1107 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric | R102, R103 |
| 2 | 47n 16V | Capacitor_SMD:C_0603_1608Metric | C1102, C1103 |
| 2 | PESD24VL1BA | Diode_SMD:D_SOD-323 | D1002, D1003 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric | R1108 |
| 1 | 0.005 1% 1W | Resistor_SMD:R_1206_3216Metric | RS700 |
| 1 | 0R LINK - REMOVE FOR P4 USB SERVICE | KINO_A0:R_1206_3216Metric_Vishay_CRCW-HP | JP1200 |
| 1 | 1.0uH 14.1A Isat | KINO_A0:L_TDK_SPM6530 | L1100 |
| 1 | 1.5u 16V | Capacitor_SMD:C_0603_1608Metric | C1301 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric | R1101 |
| 1 | 100p | Capacitor_SMD:C_0603_1608Metric | C1201 |
| 1 | 10k 1% | Resistor_SMD:R_0603_1608Metric | R1105 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric | C903 |
| 1 | 110k 0.1% | Resistor_SMD:R_0603_1608Metric | R1200 |
| 1 | 15k 0.1% | Resistor_SMD:R_0603_1608Metric | R1201 |
| 1 | 1n 50V | Capacitor_SMD:C_0603_1608Metric | C1100 |
| 1 | 1u 50V | Capacitor_SMD:C_0805_2012Metric | C1000 |
| 1 | 2.2uH 1.5A | Inductor_SMD:L_Taiyo-Yuden_NR-30xx | L1201 |
| 1 | 2.2uH 19.6A Isat | Inductor_SMD:L_Coilcraft_XAL7070-XXX | L1200 |
| 1 | 20.5k 1% | Resistor_SMD:R_0603_1608Metric | R1202 |
| 1 | 22k | Resistor_SMD:R_0603_1608Metric | R101 |
| 1 | 22u | Capacitor_SMD:C_0805_2012Metric | C1213 |
| 1 | 3.00k 1% | Resistor_SMD:R_0603_1608Metric | R1100 |
| 1 | 3.3n 50V | Capacitor_SMD:C_0603_1608Metric | C1200 |
| 1 | 3V PRIMARY RTC BACKUP | Connector_JST:JST_GH_BM02B-GHS-TBT_1x02-1MP_P1.25mm_Vertical | J800 |
| 1 | 3V3 I2C accessory | Connector_JST:JST_GH_BM04B-GHS-TBT_1x04-1MP_P1.25mm_Vertical | J102 |
| 1 | 4.7u 10V | Capacitor_SMD:C_0805_2012Metric | C1101 |
| 1 | 4.7u 16V | Capacitor_SMD:C_0603_1608Metric | C1202 |
| 1 | 470 | Resistor_SMD:R_0603_1608Metric | R1001 |
| 1 | 470n | Capacitor_SMD:C_0603_1608Metric | C702 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric | R904 |
| 1 | 5.23k 1% | Resistor_SMD:R_0603_1608Metric | R1106 |
| 1 | 7A fast 1206 | Fuse:Fuse_1206_3216Metric | F1100 |
| 1 | BQ25798RQMR | Package_DFN_QFN:Texas_RQM0029A_VQFN-29_4x4mm_P0.4mm | U1100 |
| 1 | BQ27441DRZR-G1A | Package_SON:Texas_S-PDSO-N12 | U701 |
| 1 | BZT52C10 | Diode_SMD:D_SOD-123 | D1000 |
| 1 | C6 service - 3V3 sense only | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J101 |
| 1 | CAM1_5V | TestPoint:TestPoint_Pad_D1.5mm | TP200 |
| 1 | CAM1_SYNC | TestPoint:TestPoint_Pad_D1.5mm | TP201 |
| 1 | CAM2_5V | TestPoint:TestPoint_Pad_D1.5mm | TP300 |
| 1 | CAM2_EN | TestPoint:TestPoint_Pad_D1.5mm | TP600 |
| 1 | CAM2_SYNC | TestPoint:TestPoint_Pad_D1.5mm | TP301 |
| 1 | CAM3_5V | TestPoint:TestPoint_Pad_D1.5mm | TP400 |
| 1 | CAM3_EN | TestPoint:TestPoint_Pad_D1.5mm | TP601 |
| 1 | CAM3_SYNC | TestPoint:TestPoint_Pad_D1.5mm | TP401 |
| 1 | CAM4_5V | TestPoint:TestPoint_Pad_D1.5mm | TP500 |
| 1 | CAM4_EN | TestPoint:TestPoint_Pad_D1.5mm | TP602 |
| 1 | CAM4_SYNC | TestPoint:TestPoint_Pad_D1.5mm | TP501 |
| 1 | COVER HALL SENSOR | Connector_JST:JST_GH_BM03B-GHS-TBT_1x03-1MP_P1.25mm_Vertical | J901 |
| 1 | DRV2605LDGSR | Package_SO:TSSOP-10_3x3mm_P0.5mm | U900 |
| 1 | EXTERNAL FLASH LOGIC | Connector_JST:JST_GH_BM05B-GHS-TBT_1x05-1MP_P1.25mm_Vertical | J601 |
| 1 | FUNCTION BUTTON | Connector_JST:JST_GH_BM02B-GHS-TBT_1x02-1MP_P1.25mm_Vertical | J904 |
| 1 | GND | TestPoint:TestPoint_Pad_D1.5mm | TP1202 |
| 1 | HAPTIC MOTOR | Connector_JST:JST_GH_BM02B-GHS-TBT_1x02-1MP_P1.25mm_Vertical | J900 |
The 226 most common of 256 parts.

b5463/kino-d4
Open-source four-lens digital camera with synchronized capture, original-frame storage, and a USB control workbench.

balazsbencs/ardor
This is a DIY multieffects project with a Raspberry Pi and and Codec Zero and a Raspberry Pi Display 2. With Full NAM A2 support.


JohnNeville/SunSprout
An esp32-c5 powered board that adds dual source battery charging, fuel management, and differential i2c bus. This was largely developed to be a complement with my other soil sensor project.


boydportfolio/Nylok-Heater
Two-mode handheld induction-heater controller with KiCad design files, product design rendering, engineering calculations, and full cost analysis.

koskev/OpenFanHub
This project aims to provide plug and play solution for controlling fans and reading temperatures


3351666087/solar-vest
Self-powered solar-harvesting wearable ECG vest: PCBs, 3D-printed enclosures, vest patterns, simulation and an interactive 3D explorer
It measures 117 × 69.4 mm and has 4 copper layers, 1.6 mm thick.
256 parts, built around the TPS2553DBVR-1, BQ25798RQMR, BQ27441DRZR-G1A and SS34. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the b5463/kino-d4 repository on GitHub, at the commit this page was made from: the board is hardware/pcb/kino-d4-carrier-a0/KINO_D4_Carrier_A0_2.kicad_pcb and its schematic hardware/pcb/kino-d4-carrier-a0/01_p4.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask b5463 before reusing the design.