
Bldc control ver3
pekkaroi/bldc-drive
Cheap and simple brushless DC motor driver designed for CNC applications using STM32 microcontroller
Boards in 56 GitHub repositories, designed in KiCad, that use the SN74LVC8T245PW by Texas Instruments (-40℃~+85℃ 1 1.65V~5.5V 1.65V~5.5V 8 Bidirectional CMOS CMOS Tri-State TSSOP-24 Translators, Level Shifters ROHS). See how each wires it, with its parts, size, README and files; the SN74LVC8T245PW’s symbol, footprint and pinout are on its own page.

pekkaroi/bldc-drive
Cheap and simple brushless DC motor driver designed for CNC applications using STM32 microcontroller

deltabeard/DBGC
A Game Boy cartridge using the Raspberry Pi RP2040 with RTC and MBC support.

KaiPereira/CM5-SODIMM-Carrier
A fully open source CM5 carrier to turn your Pi into a Jetson in compact SO-DIMM format!



squarewavedot/ledcubeelectronics
LEDCube battery and masterboard electronics



pekkaroi/ethernetcnc
This is my project for controlling CNC machine via ethernet port using LinuxCNC. It was originally shortly instroduced at http://pekka.eu/cnc.


theparanoids/keyhole-badge
The Paranoids have designed a sound-reactive LED electronic conference badge for DEFCON 2022. This repository contains the PCB design files for the badge and the source code to the firmware that runs on the…


emertcakir/OmniProbe
Open-source SWD, JTAG, UART, SPI, I2C and Logic Analyzer platform powered by RP2040

ironsteel/apple-ice
Apple II expansion prototyping board based on the ICE40 FPGA



thatoddmailbox/computer-hw
Schematics and layout files for the Soviet-era microcomputer I built. See https://github.com/thatoddmailbox/computer

alexfreed58/z80-CPM-board-with-smart-i-o
This is yet another retro computer running CPM on an actual Z80 CPU with a twist. Instead of using a traditional UART for communications, it uses a RPi pico module that is no bigger and no more expensive than a UART.

byrantech/stepcraft-3-d600-controller
Open-source FluidNC Controller for the Stepcraft-3/D.600 system.

James-Livesey/ORGNET
A wireless networking peripheral for the Psion Organiser II, in a datapack form factor.

robertrico/project_byte_hamr
Open source expansion platform for Apple IIe prototyping and development

ajokela/giga-shield
Arduino Giga R1 WiFi Shield with SN74LVC8T245PW driven level shifters for Z80 RetroShield interfacing


Dizzerin/Rocket-Flight-Data-Computer
This project uses an STM32H743VGT6 MCU along with some innertial measurement units (IMU)s and barometric pressure sensors to and an SD card to record flight data from a model rocket and for later analysis, graphing, and…