

NKC FPGA GDP Tang Nano
- Size
- 160 × 100.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 293
- Nets
- 88
- Pads
- 523
- Tracks, vias
- 783, 106
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 12 Jun 2021
- Updated
- 7 Nov 2026
Overview
NKC FPGA GDP Tang Nano is an open-source printed circuit board by avg67, from the avg67/nkc repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 160 × 100.3 mm with 293 parts on 88 nets, routed with 783 tracks and 106 vias.
It is built around the SN74LVC8T245PW and BAT54S. Its parts include 12 capacitors, 12 resistors, 5 diodes, 5 connectors and 4 ICs. It belongs with the fPGA and programmable logic boards and the FPGA and CPLD boards of this library.
Main components
2README
README.mdnkc
Parts
293| Qty | Value | Footprint | References |
|---|---|---|---|
| 252 | , , , , , , , , , , , , , , , +236 | ||
| 8 | 100nF | Capacitor_SMD:C_1206_3216Metric | C2, C5, C6, C7, C8, C9, C11, C12 |
| 5 | 120ohm | Resistor_SMD:R_1206_3216Metric | R1, R2, R3, R6, R7 |
| 5 | BAT54S | Package_TO_SOT_SMD:SOT-23 | D1, D2, D3, D4, D5 |
| 4 | 2.2k | Resistor_SMD:R_1206_3216Metric | R4, R5, R8, R9 |
| 3 | 10µF | Capacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-B | C1, C3, C4 |
| 3 | SN74LVC8T245 | Package_SO:SOIC-24W_7.5x15.4mm_P1.27mm | U2, U3, U4 |
| 2 | 10k | Resistor_THT:R_Array_SIP5 | RN1, RN2 |
| 2 | Mini-DIN-6 | Library:Connector_Mini-DIN_Female_6Pin_2rows | J2, J3 |
| 1 | 3k3 | Resistor_SMD:R_1206_3216Metric | R10 |
| 1 | 4.7k | Resistor_SMD:R_1206_3216Metric | R11 |
| 1 | 4k7 | Resistor_THT:R_Array_SIP9 | RN3 |
| 1 | 4k7 | Resistor_SMD:R_1206_3216Metric | R12 |
| 1 | 4n7 | Capacitor_SMD:C_1206_3216Metric | C10 |
| 1 | AudioJack3 | Connector_Audio:Jack_3.5mm_Ledino_KB3SPRS_Horizontal | J4 |
| 1 | NKC-Bus | Library:PinHeader_1x36_P2.54mm_Horizontal | J1 |
| 1 | SD_Card | Connector_Card:SD_Hirose_DM1AA_SF_PEJ82 | J5 |
| 1 | ~ | Custom_Footprints:DIP-40_W20.3mm_Socket | U1 |
More from avg67/nkc
1- 2 layers100 × 100 mm

Similar boards
- 2 layers98 × 38 mm

Bldc control ver3
pekkaroi/bldc-drive
Cheap and simple brushless DC motor driver designed for CNC applications using STM32 microcontroller
68 parts199GPL-2.0 - 4 layers51.4 × 60.6 mm

Gb rp2040 cart
deltabeard/DBGC
A Game Boy cartridge using the Raspberry Pi RP2040 with RTC and MBC support.
67 parts57 - 6 layers69.6 × 46.1 mm

Carrier
KaiPereira/CM5-SODIMM-Carrier
A fully open source CM5 carrier to turn your Pi into a Jetson in compact SO-DIMM format!
98 parts29 - 2 layers91.3 × 53.3 mm

- 2 layers99.8 × 46.4 mm

- 2 layers187 × 152 mm

Kiss masterboard
squarewavedot/ledcubeelectronics
LEDCube battery and masterboard electronics
163 parts22 - 4 layers214 × 142 mm

- 4 layers58.5 × 85.5 mm

Questions
How big is the NKC FPGA GDP Tang Nano PCB?
It measures 160 × 100.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the NKC FPGA GDP Tang Nano use?
293 parts, built around the SN74LVC8T245PW and BAT54S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the NKC FPGA GDP Tang Nano KiCad files?
From the avg67/nkc repository on GitHub, at the commit this page was made from: the board is KiCad/NKC-FPGA-GDP-Tang-Nano/NKC-FPGA-GDP-Tang-Nano.kicad_pcb and its schematic KiCad/Ethernet/ethernet.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the NKC FPGA GDP Tang Nano design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).