Skip to the content

Boards using the BQ24074RGTR

162 boards

Boards in 138 GitHub repositories, designed in KiCad, that use the BQ24074RGTR by Texas Instruments (-40℃~+125℃ 1 1.5A 4.2V 4.35V~10.2V 6.5uA Charging IC Lithium Battery Not supported Support QFN-16-EP(3x3) Battery Management ROHS). See how each wires it, with its parts, size, README and files; the BQ24074RGTR’s symbol, footprint and pinout are on its own page.

  • 2 layers69.4 × 113 mmEpaper reader hw, the printed circuit board in 3D

    Epaper reader hw

    mathias4833/epaper-reader-hw

    An open-source e-paper reader

    126 parts75CERN-OHL-W-2.0
  • 2 layers76 × 63.5 mmPicoTracker, the printed circuit board in 3D

    PicoTracker

    xiphonics/picoTracker-pcb

    Buy the official kit at xiphonics store # Trademark Notice

    98 parts36CC0-1.0
  • 4 layers150 × 95 mmSkysweep32 rev c, the printed circuit board in 3D

    Skysweep32 rev c

    bobberdolle1/SkySweep32

    Open-source passive multi-band RF monitoring system | 855–925 MHz, 2.4 GHz, 5.8 GHz | Rev C first prototype

    103 parts33GPL-3.0
  • 4 layers89.5 × 29 mmMeshnode, the printed circuit board in 3D

    Meshnode

    hansgaensbauer/polkadot

    A low cost LoRa mesh network using STM32 and the SX1276

    88 parts32
  • 2 layers79.2 × 68.8 mmEnvironment slave, the printed circuit board in 3D

    Environment slave

    pcbcupid/Lora-Wireless-Sensor-Network

    A wireless sensor network based on Lora and esp32C3. This repo will help you build a complete product from scratch to finish!

    72 parts30MIT
  • 4 layers41.4 × 108 mmMesh3310, the printed circuit board in 3D

    Mesh3310

    JLTelectronics/The-Mesh3310-Project

    Make the worlds strongest Node

    223 parts26MIT
  • 2 layers65 × 95 mmCassetteCat RevA, the printed circuit board in 3D

    CassetteCat RevA

    samyyy2311/CassetteCat

    A music player for Android. Plays your own files, Jellyfin and Navidrome/Subsonic servers, and internet radio, with synced lyrics, an equalizer, Android Auto and a Listening Record. No account or tracking.

    52 parts23GPL-3.0
  • 4 layers39 × 92 mmChaac ng, the printed circuit board in 3D

    Chaac ng

    alvarop/chaac

    This is a work in progress for a wireless weather station project.

    82 parts21MIT
  • 2 layers284.7 × 94.2 mmKeyboard 60%, the printed circuit board in 3D

    Keyboard 60%

    hw-tinkerers/TR-60

    kicad files of custom 60% keyboard inspired by bakeneko with ble support

    203 parts11MIT
  • 4 layers34 × 80 mmLAN Tester, the printed circuit board in 3D

    LAN Tester

    Markuselectronics/Raspberry-Pi-Pico-LAN-Tester

    Portable Raspberry Pi Pico LAN tester with W5500 Ethernet, OLED display and battery charging.

    51 parts7
  • 4 layersSim7070, the printed circuit board in 3D

    Sim7070

    onomondo/getting-started

    Onomondo Getting Started development kit. Board design files and firmware.

    96 parts7
  • 2 layers42.4 × 94 mmSoWeSta, the printed circuit board in 3D

    SoWeSta

    wir-mo/SoWeSta

    Solar powered Weather Station using an ESP32-C3

    106 parts7
  • 2 layers50.2 × 95.2 mmCheetoPet, the printed circuit board in 3D

    CheetoPet

    Cheet0sDelet0s/cheetoPet

    an esp32 s3 based tamagotchi

    104 parts3GPL-2.0
  • 6 layers51 × 65 mmOwo, the printed circuit board in 3D

    Owo

    hydrastro/owo

    uwu

    135 parts3
  • 4 layers60 × 60 mm3117 AUSIGN, the printed circuit board in 3D

    3117 AUSIGN

    r4hulrr/ausign

    Real-time Auslan (Australian Sign Language) to English speech translation glove. Built with ESP32-S3, flex sensors, IMU on a custom PCB, and a Bluetooth-connected Python GUI.

    151 parts3MIT
  • 4 layers61 × 88.9 mmStm32-battery, the printed circuit board in 3D

    Stm32-battery

    agrif/bluegrass

    an STM32 board with on-board battery charging

    117 parts2
  • 2 layers41.6 × 43.6 mmNew and improved zefir btn, the printed circuit board in 3D

    New and improved zefir btn

    brunostjohn/flatmaxxing

    a tiny little CLI that helps you make all the files needed to manufacture PCBs at home

    56 parts2WTFPL
  • 4 layers75 × 170 mmOpencalc pcb V5, the printed circuit board in 3D

    Opencalc pcb V5

    CoryPearl/opencalc

    A new and improved, better than the TI-84, open-source, graphing calculator

    194 parts2
  • 2 layers297 × 102.4 mmEmiuet, the printed circuit board in 3D

    Emiuet

    emnyeca/emiuet

    The thirteen positions preserve familiar guitar-derived voicings without forcing octave shifts or omissions. Expressive controls are deliberately constrained so that performance remains predictable: Pitch Bend is…

    275 parts2
  • 2 layers72.5 × 95 mmSondehound, the printed circuit board in 3D

    Sondehound

    jonhnet/sonde-search

    a couple dorks trying to break into the easiest hobby ever

    39 parts2GPL-3.0
  • 4 layers35 × 45 mmEspip boy rev2, the printed circuit board in 3D

    Espip boy rev2

    maxgohren/ESPip-Boy

    A smart watch based on the ESP32

    111 parts2
  • 4 layers65 × 100 mmPGR, the printed circuit board in 3D

    PGR

    Projeto-Guarda-Rios/PCB

    O repositório para a PCB do Projeto Guarda Rios! Inclui todos os ficheiros relacionados com a PCB!

    188 parts2MIT
  • 6 layers120 × 70 mmHealthypi 6 v5, the printed circuit board in 3D

    Healthypi 6 v5

    Protocentral/protocentral_healthypi6_hardware

    Open hardware design files for HealthyPi 6 — STM32H757 vital-signs monitor with the HealthyLink modular expansion bus

    247 parts2CERN-OHL-P-2.0
  • 4 layers36 × 34 mmUClock ESP32C3, the printed circuit board in 3D

    UClock ESP32C3

    SirioGuy/uClock

    Powered by the ESP32-C3, μClock includes an ultra-precise real-time clock that automatically corrects itself via NTP servers, ensuring it's always perfectly on time.

    68 parts2MIT