Skip to the content

Boards using the 74LVC1GU04DRL

24 boards

Boards in 22 GitHub repositories, designed in KiCad, that use the 74LVC1GU04DRL by Texas Instruments (- Logic Gates ROHS). See how each wires it, with its parts, size, README and files; the 74LVC1GU04DRL’s symbol, footprint and pinout are on its own page.

  • 2 layers10.8 × 21.8 mmNullCIC, the printed circuit board in 3D

    NullCIC

    Redherring32/NullCIC

    A little board to replace the CIC on the original NES or OpenTendo.

    4 parts116
  • 4 layers233.4 × 100 mm486 Board, the printed circuit board in 3D

    486 Board

    FoxCutter/486Dev

    Repo for the 486 breadboard computer project

    119 parts44BSD-3-Clause
  • 2 layers88.9 × 71.8 mmAdapter, the printed circuit board in 3D

    Adapter

    doitaljosh/gea-interface-board

    KiCAD board files for making an interface board that converts the RJ45 diagnostic port on most newer GE appliances to usable UART. Note: these are untested designs.

    44 parts10
  • 4 layers100 × 70 mmElonMux, the printed circuit board in 3D

    ElonMux

    EPFLXplore/Power_HW

    KiCad design files for the power boards of the Xplore rover.

    329 parts7
  • 2 layers114.2 × 36.8 mmAirbox, the printed circuit board in 3D

    Airbox

    Alacrity-Education/AirBoxV2

    The AirBox V2 Station is an open source air quality monitoring station based on the Sensirion SEN66 sensor. It measures particulate matter, CO2, VOC and NOx, runs on a solar charged lithium cell, and reports over Wi-Fi.

    68 parts6GPL-3.0
  • 2 layers100 × 50 mmSfp receiver, the printed circuit board in 3D

    Sfp receiver

    b4ck5p4c3/caroline

    🕰️ Primary Clock & Frequency Reference

    32 parts1MIT
  • 4 layers191 × 229 mmDragonRevX4Plus, the printed circuit board in 3D

    DragonRevX4Plus

    jimbro1000/DragonRevX4KSEdition

    Dragon Rev X4 Kitchen Sink

    244 parts1
  • 2 layers72.4 × 48.3 mmTml, the printed circuit board in 3D

    Tml

    0x007E/tml

    Temperature Logger

    117 parts
  • 6 layers120 × 50 mmUsb switch, the printed circuit board in 3D

    Usb switch

    cubicap/usb4-thing

    An attemt at creating a USB4 multiplexer controlled by ESP32-S3.

    65 parts
  • 4 layers91.5 × 32.7 mmPcb challenge final, the printed circuit board in 3D

    Pcb challenge final

    davidlesman/PCB-Challenge-2026

    PCB Challenge sponsored by PCBWay and Jane Street

    154 parts
  • 4 layers44 × 108.8 mmMvpUI, the printed circuit board in 3D

    MvpUI

    GeoJetta/NEMO

    102 parts
  • 2 layers233.6 × 177.8 mm608-olfactory assay arena vC V1.2, the printed circuit board in 3D

    608-olfactory assay arena vC V1.2

    iBehave-eLab/RGB-LED-Module-for-Olfactory-Assay-Arena

    The RGB LED Module "Model 608 revC V1.0" is specifically designed for use with the "Olfactory Assay Arena" Revision C and enables precise optogenetic control in behavioral experiments.

    765 partsMIT
  • 4 layers45 × 45 mmPcb challenge final, the printed circuit board in 3D

    Pcb challenge final

    manyetox/PCB-Challenge-4-word-4-bit-asynchronous-FIFO

    These were checked with KiCad's DRC and an independent script: - No unconnected items, no clearance, short or crossing errors. - No vias inside any IC courtyard, top or bottom.

    164 partsApache-2.0
  • 2 layersPcb challenge, the printed circuit board in 3D

    Pcb challenge

    MicksTe/PCB-Challenge-2026-Mickey

    UCL, KCL and Oxford, Cambridge, Imperial and Edinburgh are proud to present the 2026 PCB Challenge. Many thanks to PCBWay and Jane Street for sponsoring the prizes.

    76 parts
  • 2 layers35 × 103 mm6502board, the printed circuit board in 3D

    6502board

    rkujawa/65c02board

    Another 65c02 hobby computer

    37 partsGPL-3.0
  • 4 layers39.9 × 80.8 mmVeffy, the printed circuit board in 3D

    Veffy

    scooterthedev/veffy

    A Custom VHF Walkie Talkie

    192 partsMIT
  • 4 layers87.4 × 19.4 mmXboxUSB C, the printed circuit board in 3D

    XboxUSB C

    Redherring32/Xbox-Portable

    Fully portable original (2001) Xbox handheld using real hardware

    24 parts93
  • 2 layers47 × 36 mmBMS testboard, the printed circuit board in 3D

    BMS testboard

    EOSCogniton/ELIZ-2022

    Le Git Artemiz de l'EPSA. Contient le Catia, ainsi que la documentation en cours et quelques modèles.

    20 parts4
  • 2 layers50 × 50 mmSabertoothv2, the printed circuit board in 3D

    Sabertoothv2

    IllinoisRoboticsInSpace/IRIS_PCB

    Illinios Robotics in Space PCB

    34 parts2
  • 2 layers42 × 34 mmQCMDriver, the printed circuit board in 3D

    QCMDriver

    cjrnd/M_T_QCM

    master's thesis qcmd hardware and software

    28 parts
  • 2 layers275 × 110 mmTd deflect, the printed circuit board in 3D

    Td deflect

    kitspace-test-repos/kicad6-file-collection

    247 partsMIT