2 layers145.4 × 112.6 mm
2 layers233.6 × 177.8 mm
608-olfactory assay arena vC V1.2
iBehave-eLab/RGB-LED-Module-for-Olfactory-Assay-ArenaThe RGB LED Module "Model 608 revC V1.0" is specifically designed for use with the "Olfactory Assay Arena" Revision C and enables precise optogenetic control in behavioral experiments.
- Size
- 233.6 × 177.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 765
- Nets
- 850
- Pads
- 4,079
- Tracks, vias
- 5,775, 660
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 4 Jun 2025
- Updated
- 5 Jun 2025
Overview
608-olfactory assay arena vC V1.2 is an open-source printed circuit board by iBehave-eLab, from the iBehave-eLab/RGB-LED-Module-for-Olfactory-Assay-Arena repository on GitHub, published under the MIT licence. It is a 2-layer board of 233.6 × 177.8 mm with 765 parts on 850 nets, routed with 5,775 tracks and 660 vias.
It is built around the LM2596S-5.0, LM26CIM5-RPA and 74LVC1GU04DRL, with the VSMY1850X01, IRLML2402TRPBF and TK4R4P06PL,RQ among its other parts. Its parts include 315 diodes, 247 resistors, 69 capacitors, 32 transistors and 12 ICs.
Main components
9
LM2596S-5.0
TO-263-5-40℃~+125℃@(TJ) 1 150kHz 3A 4.5V~40V 5V 5mA Buck Buck Built-in Fixed No TO-263-5 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
LM26CIM5-RPA
SOT-23-52.7V~5.5V ±3℃ SOT-23-5 Temperature Sensors ROHSTexas InstrumentsTemperature Sensors
74LVC1GU04DRL
-- Logic Gates ROHSTexas InstrumentsLogic Gates
VSMY1850X01
0805-40℃~+85℃ 1.65V 100mA 190mW 30nm 5V 5mW/sr@IF=100mA 60° 850nm 0805 Infrared LED Emitters ROHSVishay IntertechnologyInfrared LED Emitters
IRLML2402TRPBF
SOT-23-55℃~+150℃ 1 N-channel 1.2A 20V 250mΩ@4.5V 300pF 4nC@4.5V 540mW 700mV 80pF 90pF SOT-23 MOSFETs ROHSTECH PUBLICMOSFETs
TK4R4P06PL,RQ
DPAKMOSFETsToshiba
SK54B
SMBSMB Schottky Diodes ROHSFUXINSEMISchottky DiodesTFML-120-01-L-D-RA
插件插件 Wire To Board Connector ROHSSamtecWire To Board Connector21146NA
-Toggle SwitchesAPEM
README
README.mdRGB-LED-Module-for-Olfactory-Assay-Arena
The RGB LED Module "Model 608 revC V1.0" is specifically designed for use with the "Olfactory Assay Arena" Revision C and enables precise optogenetic control in behavioral experiments. The board supports independent control of red, green, and blue high-power LEDs across four separate channels, as well as an independently controlled IR LED. It interfaces with an Arduino Mega 2560 via serial communication, using PWM and TTL signals for intensity and status regulation. Safety features and operational constraints ensure reliable use in a laboratory setting. A comprehensive command structure allows for highly flexible integration into custom research setups. This system is not approved for human use and is intended strictly for experimental laboratory environments.
Pictures
Rendering of the RGB-LED-Module-for-Olfactory-Assay-Arena (by Mehrdad Ghanbari).
Reference
The RGB-LED module "Model 608 revC V1.0" was designed as a drop-in replacement for the original single-color LED module used in the “Olfactory Assay Arena – Revision C” developed by HHMI’s Janelia Research Campus.
https://www.janelia.org/open-science/four-way-olfactometer-arena-fruit-flies https://hhmi.flintbox.com/technologies/c65b2ddd-3cc1-44d9-a95d-73e08723f724
Our contribution is limited to adapting the original PCB layout to support three-color RGB LEDs. All mechanical components and the intended use case remain unchanged and originate entirely from the original design provided by the Janelia Research Campus.
This repository is intended solely for research and prototyping purposes. All rights to the original design and its application belong to HHMI’s Janelia Research Campus.
Parts
765| Qty | Value | Footprint | References |
|---|---|---|---|
| 144 | LED_RGB_EP | Broadcom:ASMG-PT00-00001 | D1, D10, D11, D100, D101, D102, D103, D104, D105, D106, D107, D108, D109, D110, D111, D112 +128 |
| 144 | VSMY1850X01 | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D145, D146, D147, D148, D149, D150, D151, D152, D153, D154, D155, D156, D157, D158, D159, D160 +128 |
| 48 | 20R | Resistor_SMD:R_1210_3225Metric | R101, R102, R103, R104, R105, R106, R107, R108, R110, R111, R113, R114, R138, R139, R140, R141 +32 |
| 40 | 220R | Resistor_SMD:R_0805_2012Metric | R17, R18, R19, R20, R123, R124, R125, R132, R133, R134, R160, R161, R162, R169, R170, R171 +24 |
| 28 | 10R | Resistor_SMD:R_1210_3225Metric | R1, R10, R11, R12, R109, R112, R115, R116, R146, R149, R152, R153, R183, R186, R189, R190 +12 |
| 28 | MountingHole | MGh-Specials:MountingHole 2,7 mm | H1, H2, H10, H11, H12, H13, H14, H15, H16, H17, H18, H19, H20, H21, H22, H23 +12 |
| 24 | MountingHole | MGh-Specials:MountingHole 3,2 mm | H25, H26, H27, H28, H29, H30, H31, H32, H33, H34, H35, H36, H37, H38, H39, H40 +8 |
| 21 | 10k | Resistor_SMD:R_0805_2012Metric | R29, R120, R157, R191, R192, R230, R239, R241, R242, R243, R244, R245, R246, R247, R248, R249 +5 |
| 21 | 560R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R196, R199, R201, R205, R206, R207, R211, R212, R213, R217, R218, R219, R221, R231, R232, R233 +5 |
| 17 | 10n | Capacitor_SMD:C_0805_2012Metric | C1, C4, C6, C12, C13, C14, C22, C23, C24, C29, C30, C39, C44, C45, C46, C60 +1 |
| 16 | 100p | Capacitor_SMD:C_0805_2012Metric | C2, C3, C5, C7, C9, C10, C11, C19, C20, C21, C26, C27, C28, C41, C42, C43 |
| 16 | 1M | Resistor_SMD:R_0805_2012Metric | R25, R26, R27, R28, R68, R69, R70, R89, R90, R91, R126, R127, R128, R163, R164, R165 |
| 16 | 1k | Resistor_SMD:R_0805_2012Metric | R21, R22, R23, R24, R71, R72, R73, R92, R93, R94, R129, R130, R131, R166, R167, R168 |
| 16 | IRLML2402TRPBF | Package_TO_SOT_SMD:SOT-23 | Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q17, Q18, Q19, Q21, Q22, Q23, Q27, Q28, Q29 |
| 16 | TK4R4P06PL | MGh-Specials:Package_TO-252-2_MGh | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q20, Q24, Q25, Q26, Q30, Q31, Q32 |
| 14 | 100n | Capacitor_SMD:C_0805_2012Metric | C16, C17, C18, C25, C33, C40, C47, C48, C49, C51, C53, C54, C56, C57 |
| 13 | 10K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R197, R198, R200, R202, R203, R204, R208, R209, R210, R214, R215, R216, R220 |
| 9 | 100µ/50Vdc | Capacitor_SMD:CP_Elec_6.3x7.7 | C34, C35, C36, C38, C70, C71, C72, C73, C74 |
| 9 | orange | LED_SMD:LED_1206_3216Metric | D305, D308, D309, D310, D311, D312, D313, D314, D315 |
| 8 | 11k | Resistor_SMD:R_0805_2012Metric | R63, R64, R84, R85, R121, R122, R158, R159 |
| 8 | 2R2 | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R78, R79, R99, R100, R136, R137, R173, R174 |
| 8 | 6k8 | Resistor_SMD:R_0805_2012Metric | R60, R61, R81, R82, R118, R119, R155, R156 |
| 5 | 4µ7 | Capacitor_SMD:C_1206_3216Metric | C61, C64, C65, C66, C67 |
| 4 | 10µ | Capacitor_SMD:C_0805_2012Metric | C50, C52, C55, C58 |
| 4 | 3R6 | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R77, R98, R135, R172 |
| 4 | 7k5 | Resistor_SMD:R_0805_2012Metric | R59, R80, R117, R154 |
| 4 | 8R2 | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R13, R14, R15, R16 |
| 4 | 9k1 | Resistor_SMD:R_0805_2012Metric | R37, R38, R39, R40 |
| 4 | Jumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4 |
| 4 | LTC2645 | Package_SO:MSOP-16_3x4.039mm_P0.5mm | U5, U6, U7, U8 |
| 4 | NCS20064DTBR2G | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U1, U2, U3, U4 |
| 4 | blue | LED_SMD:LED_1206_3216Metric | D295, D298, D301, D304 |
| 4 | green | LED_SMD:LED_1206_3216Metric | D294, D297, D300, D303 |
| 4 | red | LED_SMD:LED_1206_3216Metric | D293, D296, D299, D302 |
| 3 | SK54B | Diode_SMD:D_1812_4532Metric_Pad1.30x3.40mm_HandSolder | D289, D306, D307 |
| 3 | green | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D290, D291, D292 |
| 2 | 1771088 | Phoenix Contact:1771088 | J4, J5 |
| 2 | TFML-120-01-L-D-RA | Samtec:SAMTEC_TFML-120-01-L-D-RA | J1, J2 |
| 1 | 10µ/25Vdc | Capacitor_Tantalum_SMD:CP_EIA-6032-28_Kemet-C | C63 |
| 1 | 10µ/35Vdc | Capacitor_Tantalum_SMD:CP_EIA-6032-28_Kemet-C | C37 |
| 1 | 1771062 | Phoenix Contact:1771062 | J3 |
| 1 | 1M2 | Resistor_SMD:R_1206_3216Metric | R193 |
| 1 | 1k1 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R53 |
| 1 | 1µ | Capacitor_SMD:C_1206_3216Metric | C59 |
| 1 | 200R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R194 |
| 1 | 21146NA | APEM.pretty:21146NA | S1 |
| 1 | 220µ/50Vdc | Capacitor_SMD:CP_Elec_6.3x7.7 | C69 |
| 1 | 5 VDC | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP5 |
| 1 | 680R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R195 |
| 1 | 74LVC1GU04DRL | Package_TO_SOT_SMD:SOT-553 | U11 |
| 1 | Arduino_Analog | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J6 |
| 1 | Arduino_R2 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J20 |
| 1 | Arduino_R3 | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J21 |
| 1 | Arduino_Supply | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J19 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_CUI_PJ-063AH_Horizontal | J18 |
| 1 | Digital I/O | Connector_PinHeader_2.54mm:PinHeader_2x18_P2.54mm_Vertical | J22 |
| 1 | GND | TestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP14 |
| 1 | LM2596S-5 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U12 |
| 1 | LM26CIM5 | LM26 Thermostat:SOT95P280X145-5N | IC1 |
| 1 | LT3080xQ | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U10 |
| 1 | PMW_Blue CH1 | TestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP3 |
| 1 | PMW_Blue CH2 | TestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP6 |
| 1 | PMW_Blue CH3 | TestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP9 |
| 1 | PMW_Blue CH4 | TestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP12 |
| 1 | PMW_Green CH1 | TestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP2 |
| 1 | PMW_Green CH2 | TestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP5 |
| 1 | PMW_Green CH3 | TestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP8 |
| 1 | PMW_Green CH4 | TestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP11 |
| 1 | PMW_IR | TestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP13 |
| 1 | PMW_Red CH1 | TestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP1 |
| 1 | PMW_Red CH2 | TestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP4 |
| 1 | PMW_Red CH3 | TestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP7 |
| 1 | PMW_Red CH4 | TestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP10 |
| 1 | SRP1265A-470M - 47 μH | Inductor_SMD:L_TaiTech_TMPC1265_13.5x12.5mm | L1 |
| 1 | Temperatur | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP7 |
| 1 | Vin | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP6 |
The 761 most common of 765 parts.
Similar boards
- 2 layers59.3 × 24.5 mm
- 2 layers123.2 × 85.1 mm
Cabinetcontrol1
ene9ba/IoT-3D-Printer-Control
Control Unit with ESP 8266 to control enclosure LED, cabon filter and analyse Temperature, Fan-Spee, Flamesensor, Smokesensor
27 parts - 4 layers34 × 45 mm
Cryosub power converter top v03
uob-hep-cad/cryosub
Design information for DUNE vertical drift readout of photon detectors over fibre ( cryo submarine )
59 partsGPL-3.0 - 2 layers35 × 60 mm
- 2 layers10.8 × 21.8 mm
NullCIC
Redherring32/NullCIC
A little board to replace the CIC on the original NES or OpenTendo.
4 parts116 - 4 layers233.4 × 100 mm
- 2 layers88.9 × 71.8 mm
Adapter
doitaljosh/gea-interface-board
KiCAD board files for making an interface board that converts the RJ45 diagnostic port on most newer GE appliances to usable UART. Note: these are untested designs.
44 parts10
Questions
How big is the 608-olfactory assay arena vC V1.2 PCB?
It measures 233.6 × 177.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 608-olfactory assay arena vC V1.2 use?
765 parts, built around the LM2596S-5.0, LM26CIM5-RPA, 74LVC1GU04DRL and VSMY1850X01. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 608-olfactory assay arena vC V1.2 KiCad files?
From the iBehave-eLab/RGB-LED-Module-for-Olfactory-Assay-Arena repository on GitHub, at the commit this page was made from: the board is Board/608-olfactory-assay-arena_vC_V1.2.kicad_pcb and its schematic Board/608-olfactory-assay-arena_vC_V1.2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the 608-olfactory assay arena vC V1.2 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).