Skip to the content
12345

74LVC1GU04DRL

Texas InstrumentsExtended

- Logic Gates ROHS

Part id
ti/74LVC1GU04DRL
Category
Logic Gates
Pins
5
In stock
0 at JLCPCB (C20636411)
Used on
24 open-source boards

Overview

The 74LVC1GU04DRL is a logic Gate made by Texas Instruments with 5 pins. - Logic Gates ROHS.

PCBKit's library has its KiCad symbol (74xGxx:74LVC1GU04DRL, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-553, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C20636411). 24 open-source boards in 22 repositories on GitHub use it.

Symbol

23GND45VCC
74xGxx:74LVC1GU04DRLFrom KiCad's library

Footprint

12345
Package_TO_SOT_SMD:SOT-553From KiCad's library

Pinout

5
The pins of the 74LVC1GU04DRL
PinNameType
1NCNot connected
2—Input
3GNDPower in
4—Output
5VCCPower in

Open-source boards using it

24See all 24
  • 2 layers10.8 × 21.8 mmNullCIC, the printed circuit board in 3D

    NullCIC

    Redherring32/NullCIC

    A little board to replace the CIC on the original NES or OpenTendo.

    4 parts116
  • 4 layers233.4 × 100 mm486 Board, the printed circuit board in 3D

    486 Board

    FoxCutter/486Dev

    Repo for the 486 breadboard computer project

    119 parts44BSD-3-Clause
  • 2 layers88.9 × 71.8 mmAdapter, the printed circuit board in 3D

    Adapter

    doitaljosh/gea-interface-board

    KiCAD board files for making an interface board that converts the RJ45 diagnostic port on most newer GE appliances to usable UART. Note: these are untested designs.

    44 parts10
  • 4 layers100 × 70 mmElonMux, the printed circuit board in 3D

    ElonMux

    EPFLXplore/Power_HW

    KiCad design files for the power boards of the Xplore rover.

    329 parts7
  • 2 layers114.2 × 36.8 mmAirbox, the printed circuit board in 3D

    Airbox

    Alacrity-Education/AirBoxV2

    The AirBox V2 Station is an open source air quality monitoring station based on the Sensirion SEN66 sensor. It measures particulate matter, CO2, VOC and NOx, runs on a solar charged lithium cell, and reports over Wi-Fi.

    68 parts6GPL-3.0
  • 2 layers100 × 50 mmSfp receiver, the printed circuit board in 3D

    Sfp receiver

    b4ck5p4c3/caroline

    🕰️ Primary Clock & Frequency Reference

    32 parts1MIT
  • 4 layers191 × 229 mmDragonRevX4Plus, the printed circuit board in 3D

    DragonRevX4Plus

    jimbro1000/DragonRevX4KSEdition

    Dragon Rev X4 Kitchen Sink

    244 parts1
  • 2 layers72.4 × 48.3 mmTml, the printed circuit board in 3D

    Tml

    0x007E/tml

    Temperature Logger

    117 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the 74LVC1GU04DRL?

Yes. The symbol is 74xGxx:74LVC1GU04DRL and the footprint Package_TO_SOT_SMD:SOT-553, both drawn on this page. PCBKit places them on a board for you when you design with it.

Where can I order the 74LVC1GU04DRL?

JLCPCB lists it as part C20636411, with 0 in stock; the sellers' links on this page open their listings.

What can replace the 74LVC1GU04DRL?

Parts like it in the library: the SN74LVC1G04DRLR by TECH PUBLIC, the SN74LVC1G07DRLR by TECH PUBLIC, the SN74LVC1G14DRLR by TECH PUBLIC and the SN74LVC1G17DRLR by TECH PUBLIC. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the 74LVC1GU04DRL?

24 boards in 22 repositories on GitHub; the most starred are listed on this page, with their KiCad files.