Skip to the content

Boards using the MBR120VLSFT1G-TP

66 boards

Boards in 44 GitHub repositories, designed in KiCad, that use the MBR120VLSFT1G-TP by TECH PUBLIC. See how each wires it, with its parts, size, README and files; the MBR120VLSFT1G-TP’s symbol, footprint and pinout are on its own page.

  • 4 layers53.7 × 21 mmPico WH, the printed circuit board in 3D

    Pico WH

    sabogalc/project-piCo

    Because it should be a crime to release a product with Micro-USB in the 2020s

    93 parts159WTFPL
  • 2 layers25.4 × 54.5 mmRpi pico debugger shoe, the printed circuit board in 3D

    Rpi pico debugger shoe

    ShawnHymel/rpi-pico-debugger-shoe

    Stackable debugger board for the Raspberry Pi Pico. Solder long headers to this debugger board in order to connect the Pico to it.

    49 parts84
  • 2 layers31.1 × 94.2 mmMeshtasticStick, the printed circuit board in 3D

    MeshtasticStick

    Oliver0804/MeshtasticStick

    80 parts8
  • 2 layers48 × 65.5 mmOpen telegraph, the printed circuit board in 3D

    Open telegraph

    animesh-chouhan/open-telegraph

    A pocket-size Morse key. One button, one RGB LED, an ESP32-S3, and a battery. Plug it in over USB-C or pair it over Bluetooth and it types Morse into any device as a standard keyboard. Fully open, down to the copper.

    52 parts5CERN-OHL-S-2.0
  • 2 layers114 × 49.3 mmSolderbit gamepad, the printed circuit board in 3D

    Solderbit gamepad

    devices-lab/solderbit-gamepad

    Learn-to-solder kit for the BBC micro:bit

    58 parts4GPL-3.0
  • 2 layers66 × 143.3 mmWeatherV3-kernelcon2026, the printed circuit board in 3D

    WeatherV3-kernelcon2026

    ZonkSec/kernelcon-2026-badge

    source code for kernelcon 2026 off grid badge

    87 parts4
  • 2 layers43 × 93 mmLoRaNode, the printed circuit board in 3D

    LoRaNode

    cernohorsky/LoRa-Node-Solar

    LoRa Node based on Arduino Pro mini with RFM95W module and PCB antenna. Includes TPS63031 buck-boost convertor and MCP7381 LiPo charger prepared for solar panel. PCB has I2C pinheader and few GPIO pads.

    59 parts3
  • 2 layers30 × 30 mmADXL PCB, the printed circuit board in 3D

    ADXL PCB

    EmielV2002/Inputshaper-PCB

    A PCB to automatically tune your inputshaper settings.

    60 parts2MIT
  • 2 layers120 × 100 mmUsb pd pico controller, the printed circuit board in 3D

    Usb pd pico controller

    flummer/sao-wall

    Design for a SAO display PCB, power and control board

    64 parts2CC-BY-SA-4.0
  • 2 layers78.2 × 67.3 mmMegapaladin, the printed circuit board in 3D

    Megapaladin

    lucaspcamargo/megapaladin

    Switchless region mod for the SEGA Mega Drive

    68 parts2
  • 2 layers24 × 51 mmMy template, the printed circuit board in 3D

    My template

    nwasr/Pico-board

    Designed Pico Board from scratch

    46 parts2
  • 2 layersPcb custom simm-40-rp2040, the printed circuit board in 3D

    Pcb custom simm-40-rp2040

    shishir-dey/pcb-custom-simm-40-rp2040

    Clone of the Raspberry Pi Pico board on a custom SIMM (single in-line memory module) footprint with 40 pins. Made with KiCad

    43 parts2MIT
  • 2 layersSpark, the printed circuit board in 3D

    Spark

    zheylmun/charger

    Modular 1S charger

    16 parts2
  • 2 layers34.4 × 44.6 mmRP2350, the printed circuit board in 3D

    RP2350

    fdsaspa025/RP2350-L1-board

    Custom RP2350 PCB originally designed for object avoidance for the Bronco ASTRA 2026 competition drone. This project was abondoned pre-fabrication due to rule changes which made object avoidance unnecessary

    48 parts1
  • 4 layers100 × 80 mmMouse joystick pcb, the printed circuit board in 3D

    Mouse joystick pcb

    peterpolidoro/mouse-joystick-pcb

    KiCad design, fabrication package and documentation for a single-axis mouse joystick controller board: RP2040, TMC5130A stepper driver, brake and torque front ends, a pyControl UART peripheral for the Janelia Dudman lab…

    364 parts1
  • 4 layers29.5 × 23.4 mmStamp RP2040, the printed circuit board in 3D

    Stamp RP2040

    TheContrappostoShop/PICOre

    The PICOre project consist of an ecosystem with stamp module all pin to pin compatible.

    44 parts1
  • 2 layers98.4 × 98.4 mmRpi platform r1, the printed circuit board in 3D

    Rpi platform r1

    65roadster/TinyBench-Pico

    A Raspberry Pi Pico Breakout Board with Dual Channel DAC

    55 parts
  • 2 layers21 × 51.5 mmPicoCAN, the printed circuit board in 3D

    PicoCAN

    AdrianR3/PicoCAN

    RP2040 based dev board w/built-in CAN controller and transceiver

    52 parts
  • 2 layers71.4 × 99.7 mmRP2350A Macropad, the printed circuit board in 3D

    RP2350A Macropad

    arkandas/rp2350-macropad

    RP2350A 3x3 mechanical macropad with a browser-programmable keymap and an on-board status LCD

    85 partsMIT
  • 4 layers179.7 × 127.9 mmBackplane Board, the printed circuit board in 3D

    Backplane Board

    CabrilloRoboticsClub/robosub_electrical

    The electronics for RoboSub 2025

    189 partsMIT
  • 2 layers188.5 × 31.5 mmStack light, the printed circuit board in 3D

    Stack light

    CarterKoopa/stack_light_pcb

    46 partsGPL-3.0
  • 4 layers66 × 34 mmCSMC001, the printed circuit board in 3D

    CSMC001

    COSMIIC-Community/Externals-WL-Hardware

    CAD files for Wireless Link (PCB and enclosure)

    102 partsCERN-OHL-P-2.0
  • 4 layers15.4 × 25.5 mmChiquito, the printed circuit board in 3D

    Chiquito

    devcexx/chiquito

    Smol development / testing board for STM32C071

    17 parts