Skip to the content
12

MBR120VLSFT1G-TP

TECH PUBLICExtended

Part id
tech-public/MBR120VLSFT1G-TP
Category
Uncategorised
Package
SOD-123F
Pins
2
In stock
2,938 at JLCPCB (C49231016)
Used on
66 open-source boards

Overview

The MBR120VLSFT1G-TP is an uncategorised made by TECH PUBLIC in a SOD-123F package with 2 pins.

PCBKit's library has its footprint (Diode_SMD:D_SOD-123F, from KiCad's library), ready for a KiCad board. 2,938 are in stock at JLCPCB (part C49231016). 66 open-source boards in 44 repositories on GitHub use it.

Symbol

The library has no symbol for this part yet.

Footprint

12
Diode_SMD:D_SOD-123FFrom KiCad's library

Open-source boards using it

66See all 66
  • 4 layers53.7 × 21 mmPico WH, the printed circuit board in 3D

    Pico WH

    sabogalc/project-piCo

    Because it should be a crime to release a product with Micro-USB in the 2020s

    93 parts159WTFPL
  • 2 layers25.4 × 54.5 mmRpi pico debugger shoe, the printed circuit board in 3D

    Rpi pico debugger shoe

    ShawnHymel/rpi-pico-debugger-shoe

    Stackable debugger board for the Raspberry Pi Pico. Solder long headers to this debugger board in order to connect the Pico to it.

    49 parts84
  • 2 layers31.1 × 94.2 mmMeshtasticStick, the printed circuit board in 3D

    MeshtasticStick

    Oliver0804/MeshtasticStick

    80 parts8
  • 2 layers48 × 65.5 mmOpen telegraph, the printed circuit board in 3D

    Open telegraph

    animesh-chouhan/open-telegraph

    A pocket-size Morse key. One button, one RGB LED, an ESP32-S3, and a battery. Plug it in over USB-C or pair it over Bluetooth and it types Morse into any device as a standard keyboard. Fully open, down to the copper.

    52 parts5CERN-OHL-S-2.0
  • 2 layers114 × 49.3 mmSolderbit gamepad, the printed circuit board in 3D

    Solderbit gamepad

    devices-lab/solderbit-gamepad

    Learn-to-solder kit for the BBC micro:bit

    58 parts4GPL-3.0
  • 2 layers66 × 143.3 mmWeatherV3-kernelcon2026, the printed circuit board in 3D

    WeatherV3-kernelcon2026

    ZonkSec/kernelcon-2026-badge

    source code for kernelcon 2026 off grid badge

    87 parts4
  • 2 layers43 × 93 mmLoRaNode, the printed circuit board in 3D

    LoRaNode

    cernohorsky/LoRa-Node-Solar

    LoRa Node based on Arduino Pro mini with RFM95W module and PCB antenna. Includes TPS63031 buck-boost convertor and MCP7381 LiPo charger prepared for solar panel. PCB has I2C pinheader and few GPIO pads.

    59 parts3

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MBR120VLSFT1G-TP?

Yes. the footprint Diode_SMD:D_SOD-123F, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MBR120VLSFT1G-TP?

SOD-123F, with 2 pins. Its footprint is drawn on this page.

Where is the MBR120VLSFT1G-TP datasheet?

TECH PUBLIC publishes it: the Datasheet link on this page opens it.

Where can I order the MBR120VLSFT1G-TP?

JLCPCB lists it as part C49231016, with 2,938 in stock; the sellers' links on this page open their listings.

What can replace the MBR120VLSFT1G-TP?

Parts like it in the library: the FR207W by YFW, the MBR1020VL-TP by TECH PUBLIC, the SD40A1D122F by SSGSEMI and the PMEG2010AEH-TP by TECH PUBLIC. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MBR120VLSFT1G-TP?

66 boards in 44 repositories on GitHub; the most starred are listed on this page, with their KiCad files.