
Pico 2 C
sabogalc/project-piCo
Because it should be a crime to release a product with Micro-USB in the 2020s

Because it should be a crime to release a product with Micro-USB in the 2020s
Pico WH is an open-source printed circuit board by sabogalc, from the sabogalc/project-piCo repository on GitHub, published under the WTFPL licence. It is a 4-layer board of 53.7 × 21 mm with 93 parts on 110 nets, routed with 942 tracks and 325 vias.
It is built around the RP2040, CYW43438KUBGT and LFB212G45CG7D227, with the RT6154AGQW, 8Q-37.400MEEE-T and BM03B-SRSS-TB among its other parts. Its parts include 41 capacitors, 22 resistors, 5 connectors, 4 ICs and 3 inductors. It belongs with the RP2040 boards of this library.
After a few months of making projects with the Pico, I found myself wanting to utilize some of the features offered by the Pico W. However, this meant that I would need to give the same USB-C reverse-engineering treatment to this board, so I took what I learned from my first go and remade the Pico WH as best I could.
This time, rather than making my own board layout, I tried to follow the factory layout as closely as possible. Similarly to the Official Files section of the original Type-C Pico, I converted the factory Allegro files into a KiCad file (with an Altium conversion in between the two).
I then used this converted board as the starting point for my board, so the final result is much closer to the original design. Unfortunately, I cannot release either the converted board or my initial design at this time for reasons that I will explain below.
On page 2 of the schematic, there is a note by the antenna arrangement that reads
The Niche is an Abracon/Proant patented antenna technology. Please contact niche@abracon.com for information on licensing.
I sent an email explaining my project and how it wasn't commercial in any capacity, asking if there was any kind of fee I could pay to be able to release the board as is. The reponse I got read
The licensed version of Niche is aimed for high volumes (>100kpcs), and there is a royalty fee/pcs which is agreed per project/customer. The idea is that it should be a very cost-effective solution for high-volume production. It is not an open-source solution which can be used without agreement with Abracon.
They did offer an alternative in the form of a stamped metal antenna that worked virtually identically and came with no license requirement, so I remade the board around this footprint (which is the one you can find in this folder). I found the patent here, and though I am not a legal or patent expert, my understanding is that by 35 U.S.C. 154(b), this patent will expire on March 11, 2038, after which I will be okay to release all of the designs.
Though I am not releasing the design that is barred by the patent, I will still show photos of the final version of that board, and I have also released the boardview file for that board (neither one of these are remotely close to a finished PCB, so I'm sure that is fine). Below is a photo of both boards, with the royalty-free design on the left and the closer 1:1 design on the right.
My design process was essentially Alt+Tabbing between a window that had the converted Allegro design and my blank PCB and just building it up piece by piece while following the design specifications from the import. I did have to make some changes in order to get the board manufactured such as slightly decreasing the diameter of the BGA balls for the WiFi chip, but the final result is still very close to the original parameters.
Unfortunately, because of how many vias this board has, the tight routing, and the fact that it is four layers, it costs about $70-75 USD to get 10 of them manufactured, and then to be able to populate them raises the price even more, so it is not very financially sound to order and make this board. Regardless, these design files should still prove useful as an educational resource.
As with the original project piCo, the boot select switch, Schottky diode, and 12MHz crystal in my design are not the exact ones that the Pi Foundation used, but they are compatible substitutes.
A PDF copy of the schematic is available here.
Below are the renders of the board in KiCad, as well as individual photos of them in real life.
KiCad Render - Original:
KiCad Render - No License:
Pico WH:
Pico WH - No License:
A version of this board with a non-patented antenna could be developed. Similar designs are available in Chinese clone boards, such as the one in this AliExpress listing. If anyone would like to submit a pull request with changes like this one, I would be happy to merge it.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 100n | Capacitor_SMD:C_0201_0603Metric | C4, C5, C6, C7, C8, C9, C10, C11, C15, C20, C251, C255, C256 |
| 6 | 2.2u | Capacitor_SMD:C_0402_1005Metric | C12, C13, C14, C18, C246, C248 |
| 6 | TestPoint | TestPoint:TestPoint_Pad_1.5x1.5mm | TP1, TP2, TP3, TP4, TP5, TP6 |
| 4 | 10k | Resistor_SMD:R_0201_0603Metric | R1, R6, R10, R88 |
| 4 | 1u | Capacitor_SMD:C_0201_0603Metric | C242, C244, C245, C252 |
| 3 | 100k | Resistor_SMD:R_0201_0603Metric | R2, R8, R20 |
| 3 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C240, C241, C243 |
| 3 | 47u | Capacitor_SMD:C_0805_2012Metric | C1, C2, C21 |
| 2 | 0.2p | Capacitor_SMD:C_0402_1005Metric | C260, C271 |
| 2 | 10p | Capacitor_SMD:C_0201_0603Metric | C249, C250 |
| 2 | 15p | Capacitor_SMD:C_0201_0603Metric | C16, C17 |
| 2 | 18p | Capacitor_SMD:C_0201_0603Metric | C257, C258 |
| 2 | 1k | Resistor_SMD:R_0201_0603Metric | R11, R14 |
| 2 | 27R | Resistor_SMD:R_0201_0603Metric | R12, R13 |
| 2 | 470R | Resistor_SMD:R_0201_0603Metric | R3, R87 |
| 2 | 5k1 | Resistor_SMD:R_0402_1005Metric | R15, R16 |
| 2 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2 |
| 2 | NF | Capacitor_SMD:C_0201_0603Metric | C247, C272 |
| 1 | 0.36p | Capacitor_SMD:C_0402_1005Metric | C261 |
| 1 | 0.3p | Capacitor_SMD:C_0402_1005Metric | C262 |
| 1 | 0R | Resistor_SMD:R_0201_0603Metric | R86 |
| 1 | 1R | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 2.2u | Inductor_SMD:L_0603_1608Metric | L8 |
| 1 | 200R | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 20k | Resistor_SMD:R_0201_0603Metric | R5 |
| 1 | 220R | Resistor_SMD:R_0201_0603Metric | R81 |
| 1 | 22R | Resistor_SMD:R_0201_0603Metric | R80 |
| 1 | 4.7n | Inductor_SMD:L_0201_0603Metric | L9 |
| 1 | 560k | Resistor_SMD:R_0201_0603Metric | R21 |
| 1 | 600Ω@100 MHz | Inductor_SMD:L_0603_1608Metric | FB8 |
| 1 | 600Ω@100 MHz | Inductor_SMD:L_0201_0603Metric | FB9 |
| 1 | 8Q-37.400MEEE-T | Oscillator:Oscillator_SMD_Abracon_ASCO-4Pin_1.6x1.2mm | Y2 |
| 1 | AANI-NI-0012 (R) | Pico WH:AANI-NI-0012 | AE1 |
| 1 | BM03B-SRSS-TB | Connector_JST:JST_SH_BM03B-SRSS-TB_1x03-1MP_P1.00mm_Vertical | J5 |
| 1 | CYW43438KUBGT | Pico WH:BGA-63 | U4 |
| 1 | DMG1012T-7 | Package_TO_SOT_SMD:SOT-523 | Q1 |
| 1 | ECS-120-8-33-JGN-TR | Crystal:Crystal_SMD_SeikoEpson_FA238-4Pin_3.2x2.5mm | Y1 |
| 1 | LFB212G45CG7D227 | Pico WH:FILS3_MUR_LFB21XXCG2Q | Y3 |
| 1 | LTST-C191KGKT | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | MBR120VLSFT1G | Diode_SMD:D_SOD-123F | D1 |
| 1 | PTS810 SJK 250 SMTR LFS | Button_Switch_SMD:SW_SPST_PTS810 | SW1 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U3 |
| 1 | RT6154AGQW | Package_DFN_QFN:DFN-14-1EP_3x4mm_P0.5mm_EP1.7x3.3mm | U1 |
| 1 | SHJJ-031306 | Pico WH:RF_SHIELD_PICOW | J1 |
| 1 | SRN2512-1R0M | Inductor_SMD:L_1008_2520Metric | L1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J2 |
| 1 | W25Q16JVUXIQ_TR | Package_DFN_QFN:TDFN-8-1EP_3x2mm_P0.5mm_EP1.3x1.4mm | U2 |
| 1 | ~ | Pico WH:CON_PICO_1-20 | J3 |
| 1 | ~ | Pico WH:CON_PICO_21-40 | J4 |

sabogalc/project-piCo
Because it should be a crime to release a product with Micro-USB in the 2020s

sabogalc/project-piCo
Because it should be a crime to release a product with Micro-USB in the 2020s

sabogalc/project-piCo
Because it should be a crime to release a product with Micro-USB in the 2020s


RoyZeng0317/kicad
This is the kicad circuit diagram layout, it's have more layout in here.

zeankundev/boards
A collection and an archive of KiCad projects I made. Contains projects from 2023 - 2024.

lightsource-nz/crossfire
MCU application to route MIDI message streams between USB-based MIDI devices



tinyvision-ai-inc/pico2-ice
Doc | Hardware | SDK | Schematic | Assembly | Discord

It measures 53.7 × 21 mm and has 4 copper layers, 1.6 mm thick.
93 parts, built around the RP2040, CYW43438KUBGT, LFB212G45CG7D227 and RT6154AGQW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the sabogalc/project-piCo repository on GitHub, at the commit this page was made from: the board is KiCad Projects/Pico WH - No License/Pico WH.kicad_pcb and its schematic KiCad Projects/Pico 2 C/Pico 2 C.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the WTFPL licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).