
New Atmega 2560
RoyZeng0317/kicad
This is the kicad circuit diagram layout, it's have more layout in here.

This is the kicad circuit diagram layout, it's have more layout in here.
Raspberry pi pico 2w is an open-source printed circuit board by RoyZeng0317, from the RoyZeng0317/kicad repository on GitHub. It is a 4-layer board of 65 × 56 mm with 83 parts on 94 nets, routed with 411 tracks and 0 vias.
It is built around the CYW43439KUBGT, LFB212G45CG7D227 and RT6154AGQW, with the W25Q32RVXHJQ, CAT24C256LI and DMG1012T among its other parts. Its parts include 36 capacitors, 23 resistors, 5 ICs, 4 inductors and 3 connectors. It belongs with the RP2040 and RP2350 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 31 | 100n | R_0402_1005Metric | C1, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24 +15 |
| 9 | 10k | R_0402_1005Metric | R11, R12, R13, R14, R15, R16, R17, R18, R19 |
| 4 | 22R | R_0402_1005Metric | R20, R21, R22, R23 |
| 4 | 4k7 | R_0402_1005Metric | R7, R8, R9, R10 |
| 4 | MountingHole_2.7mm_M2.5 | MountingHole:MountingHole_2.7mm_M2.5 | MH1, MH2, MH3, MH4 |
| 3 | 47u | C_0805_2012Metric | C4, C5, C6 |
| 2 | 100k | R_0402_1005Metric | R1, R3 |
| 2 | 15p | R_0402_1005Metric | C18, C19 |
| 2 | 1k | R_0402_1005Metric | R4, R5 |
| 1 | 0R | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | Jumper |
| 1 | 12MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 2.2u | R_0402_1005Metric | L2 |
| 1 | 330R | R_0402_1005Metric | R6 |
| 1 | 33k | R_0402_1005Metric | R2 |
| 1 | 37.4MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | 4n7 | R_0402_1005Metric | L4 |
| 1 | 4u7 | C_0805_2012Metric | L1 |
| 1 | 600R@100MHz | R_0402_1005Metric | L3 |
| 1 | CAT24C256 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | CYW43439KUBGT | BGA63N40P7X12_287X487X55N | U3 |
| 1 | DMG1012T | Package_TO_SOT_SMD:SOT-523 | Q1 |
| 1 | Debug | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | GPIO | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | Green | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | ID_WP | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1 |
| 1 | LFB212G45CG7D227 | LFB212G45CG7D227 | FL1 |
| 1 | PMEG6010ELR | Diode_SMD:D_SOD-123W | D1 |
| 1 | RP2350A0A2 | QFN-60-1EP_7x7mm_P0.4mm_EP3.4x3.4mm | U2 |
| 1 | RT6154AGQW | SON50P300X400X80-15N-D | IC1 |
| 1 | USB3_A | Connector_USB:USB_A_Molex_67643 | J2 |
| 1 | W25Q32RVXHJQ | SON50P300X200X40-9N | IC2 |

RoyZeng0317/kicad
This is the kicad circuit diagram layout, it's have more layout in here.

RoyZeng0317/kicad
This is the kicad circuit diagram layout, it's have more layout in here.

RoyZeng0317/kicad
This is the kicad circuit diagram layout, it's have more layout in here.

RoyZeng0317/kicad
This is the kicad circuit diagram layout, it's have more layout in here.

RoyZeng0317/kicad
This is the kicad circuit diagram layout, it's have more layout in here.

RoyZeng0317/kicad
This is the kicad circuit diagram layout, it's have more layout in here.

RoyZeng0317/kicad
This is the kicad circuit diagram layout, it's have more layout in here.

RoyZeng0317/kicad
This is the kicad circuit diagram layout, it's have more layout in here.

sabogalc/project-piCo
Because it should be a crime to release a product with Micro-USB in the 2020s



Ons-Nouri/raspberry_Pi_Pico_Prototype
Custom Raspberry Pi Pico-style development board designed in KiCad, featuring the RP2040/RP2350 microcontroller, USB connectivity, power management, GPIO headers, and custom PCB layout.

gitdoalberto/dosimetro-ruido-nr15
Projeto desenvolvido como Eetapa de Capacitação Profissional - Embarcatech.

locked/picoclock
This repo is an attempt at building a Pico based alarm clock. It was created for my kids and features:

lightsource-nz/crossfire
MCU application to route MIDI message streams between USB-based MIDI devices

mbayrao/YMC-Mathpad
這款鍵盤靈感來自Summa-Congni/Mathpad,當我在2025年的某日給女朋友看到能夠方便輸入數學符號的Mathpad 她知道我喜歡也能製做出電路板,便鼓勵我著手製作此project而誕生。 此板為第一版設計,製作時有許多問題導致設計不斷變更直到最後。 主要思路為無線藍芽連接內置5V USB Type C充電電路並提供電量指示燈、有OLED螢幕可供視覺回饋挑選符號
It measures 65 × 56 mm and has 4 copper layers, 1.6 mm thick.
83 parts, built around the CYW43439KUBGT, LFB212G45CG7D227, RT6154AGQW and W25Q32RVXHJQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the RoyZeng0317/kicad repository on GitHub, at the commit this page was made from: the board is Raspberry pi pico 2w/Raspberry pi pico 2w/Raspberry pi pico 2w.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask RoyZeng0317 before reusing the design.