Skip to the content
12345678

CAT24C256LI

onsemiExtended

1,000,000 cycles 1.8V~5.5V 100 Years 256Kbit 400kHz 5ms Hardware write protection function、Noise suppression function、Built-in power-on reset (POR) I2C PDIP-8 EEPROM ROHS

Part id
onsemi/CAT24C256LI
Category
EEPROM
Package
PDIP-8
Pins
8
In stock
0 at JLCPCB (C5568313)
Used on
99 open-source boards

Overview

The CAT24C256LI is an EEPROM made by onsemi in a PDIP-8 package with 8 pins. 1,000,000 cycles 1.8V~5.5V 100 Years 256Kbit 400kHz 5ms Hardware write protection function、Noise suppression function、Built-in power-on reset (POR) I2C PDIP-8 EEPROM ROHS.

PCBKit's library has its KiCad symbol (Memory_EEPROM:CAT24C256, from KiCad's library) and its footprint (Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C5568313). 99 open-source boards in 81 repositories on GitHub use it.

Symbol

1A02A13A24GND5SDA6SCL7WP8VCC
Memory_EEPROM:CAT24C256From KiCad's library

Footprint

12345678
Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPadsFrom KiCad's library

Pinout

8
The pins of the CAT24C256LI
PinNameType
1A0Input
2A1Input
3A2Input
4GNDPower in
5SDAInput/output
6SCLInput
7WPInput
8VCCPower in

Open-source boards using it

99See all 99
  • 6 layers160 × 100 mmAdrmu6layer, the printed circuit board in 3D

    Adrmu6layer

    marcoreps/ADRmu

    ADR1000 10V standard

    240 parts149
  • 2 layers65 × 56.5 mmHat, the printed circuit board in 3D

    Hat

    worlickwerx/pi-parport

    retro parallel port for raspberry pi

    24 parts78GPL-2.0
  • 2 layersTopBoard, the printed circuit board in 3D

    TopBoard

    Libre-Talk/Wave

    Smart Speaker satellite

    184 parts22
  • 4 layers158.8 × 104.1 mm8-Bit CPU, the printed circuit board in 3D

    8-Bit CPU

    frenchie/8-Bit-Computer

    An 8-Bit Computer

    323 parts20
  • 4 layers205.5 × 152 mmLTC3, the printed circuit board in 3D

    LTC3

    psas/launch-tower

    CAD files and software for the launch tower computer (LTC)

    507 parts19
  • 4 layers91.7 × 66.8 mmPico expansion board, the printed circuit board in 3D

    Pico expansion board

    eamars/RaspberryPi-Pico-Motor-Expansion-Board

    A raspberry pi pico expansion board designed for OpenTrickler project

    68 parts18GPL-3.0
  • 2 layers71.2 × 22.6 mmNullWiiCon v2, the printed circuit board in 3D

    NullWiiCon v2

    nullstalgia/NullWiiCon

    AVR Firmware to convert Nintendo Extension port controllers to USB for use on Switch and PC

    56 parts9GPL-3.0
  • 2 layers88.9 × 88.9 mmKnob v1, the printed circuit board in 3D

    Knob v1

    bmo/tuning-knob-pcboard

    KiCAD PC Board design for a tuning knob that works with Flex Radio SmartSDR, PowerSDR, and RHR. Uses STM32 hardware.

    25 parts7MIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the CAT24C256LI?

Yes. The symbol is Memory_EEPROM:CAT24C256 and the footprint Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the CAT24C256LI?

PDIP-8, with 8 pins. Its footprint is drawn on this page.

Where is the CAT24C256LI datasheet?

onsemi publishes it: the Datasheet link on this page opens it.

Where can I order the CAT24C256LI?

JLCPCB lists it as part C5568313, with 0 in stock; the sellers' links on this page open their listings.

What can replace the CAT24C256LI?

Parts like it in the library: the AT24C32N by HGSEMI, the 24C02N(XBLW) by XBLW, the AT93C66N by HGSEMI and the 24C16N(XBLW) by XBLW. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the CAT24C256LI?

99 boards in 81 repositories on GitHub; the most starred are listed on this page, with their KiCad files.