

Pico2-ice
Doc | Hardware | SDK | Schematic | Assembly | Discord
- Size
- 27.9 × 63.5 mm
- Copper layers
- 4
- Thickness
- 1.58 mm
- Parts
- 124
- Nets
- 125
- Pads
- 565
- Tracks, vias
- 2,189, 270
- Pours
- 15
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 13 Aug 2024
- Updated
- 4 Jul 2025
Overview
Pico2-ice is an open-source printed circuit board by tinyvision-ai-inc, from the tinyvision-ai-inc/pico2-ice repository on GitHub, published under the MIT licence. It is a 4-layer board of 27.9 × 63.5 mm with 124 parts on 125 nets, routed with 2,189 tracks and 270 vias.
It is built around the ICE40UP5K-SG48I, RP2350B and W25Q32JVSSIQ, with the APS6404L-3SQN-SN, TL431BQDBZR and RC0402FR-0710KL among its other parts. Its parts include 42 capacitors, 40 resistors, 8 ICs, 7 diodes and 5 connectors. It belongs with the RP2350 and FPGA and CPLD boards of this library.
Main components
12ICE40UP5K-SG48I
QFN-48-EP(7x7)-40℃~+100℃ 1.14V~1.26V 1171456bit 39 5280 660 iCE40 UltraPlus QFN-48-EP(7x7) Programmable Logic Device (CPLDs/FPGAs) ROHSLatticeProgrammable Logic Device (CPLDs/FPGAs)RP2350B
QFN-80-EP(10x10)48 Power-on reset (POR)、Watchdog reset、External pin reset (NRST)、Built-in general-purpose timer、Integrated LDO、True random number generator (TRNG)、Hardware ECC check、Independent watchdog (IWDG) QFN-80-EP(10x10) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)W25Q32JVSSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 133MHz 1uA 2.7V~3.6V 20 Years 32Mbit 3ms SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHAPS6404L-3SQN-SN
SOP-8LSOP-8L DRAM ROHSAP MemoryDRAMTL431BQDBZR
SOT-23-3-40℃~+125℃ 100mA 1mA 2.495V~36V 2.5V~36V Adjustable Parallel ±0.5% SOT-23-3 Voltage Reference ROHSTexas InstrumentsVoltage ReferenceRC0402FR-0710KL
UncategorisedUnknown maker1N5819WS
SOD-3231 Independent 1A 25A 40V 500uA@40V 600mV@1A SOD-323 Schottky Diodes ROHSGuangdong HottechSchottky DiodesCS1213AGF260
SMD,3.9x2.9mm-40℃~+85℃ 2.6N 2.9mm 2mm 3.9mm 50V 50mA Round Button SMD(SMT) Tab SPST-NO Surface Mount,Vertical SMD,3.9x2.9mm Tactile Switches ROHSCIT Relay and SwitchTactile SwitchesMHPA1010RGBDT
SMD-4P,1x1mm-40℃~+85℃ 0.6mm 120° 1mm 1mm Black frosted lens Common Anode G:525.5nm~533.5nm、R:619.5nm~624.5nm、B:463.5nm~471.5nm R:1.7V~2.3V、G:2.5V~3.5V、B:2.5V~3.5V R:17.7mcd~30.0mcd、G:27.6mcd~53.9mcd、B:5.9mcd~11.6mcd R:2000V、G:1000V、B:1000V R:20mA、G:20mA、B:20mA R:50mW、G:60mW、B:60mW SMD-4P,1x1mm RGB LEDs ROHSMEIHUARGB LEDsYC124-FR-0710KL
0402x410kΩ 4 62.5mW 8 ±1% ±200ppm/℃ 0402x4 Resistor Networks, Arrays ROHSYAGEOResistor Networks & Arrays1N4148WT-7-CN
SOD-523SOD-523 Switching Diodes ROHSChipNoboSwitching DiodesMLP2016H3R3MT0S1
08061.2A 120mΩ 3.3uH Multilayer inductor ±20% 0806 Inductors (SMD) ROHSTDKInductors (SMD)
README
README.mdpico2-ice
Doc | Hardware | SDK | Schematic | Assembly | Discord

PCB Design Files, Designs, Documentation
The pico2-ice is a small, low cost board with the Raspberry Pi Pico processor (RP2350) and a Lattice Semiconductor iCE40UP5K FPGA. The board features independent flash for the FPGA and RP2350, low power PSRAM, a couple of pushbuttons and a two 3 color LED with all FPGA and RP2350 pins brought out to easy to use 0.1" header pins (arranged as Pmod's) for fast prototyping.
The tinyVision.ai pico2-ice board Features:
- Raspberry Pi RP2350B processor
- Lattice UltraPlus ICE40UP5K FPGA with 5.3k LUTs, 1Mb SPRAM, 120Kb DPRAM, 8 Multipliers
- ALL RP2350 and 32 FPGA GPIO on 0.1” headers
- 4MB SPI Flash
- 8MB low power qSPI SRAM
- 2 RGB LED, one for the RP2350 and one for the FPGA
- 2 pushbuttons, 1 for RP2350 boot mode that can also be used for other functions, and one for the FPGA
- On board 3.3V and 1.2V Regulators, can supply 3.3V to your project
- Open source schematic and layout using KiCAD design tools
- 4 layer board with a solid ground plane for good signal integrity
Firmware features:
- FPGA clock supplied by the RP2350, easy to program FPGA clock under SW control
- RP2350 can program the FPGA in various ways
- Micropython Firmware or C SDK
OSHW US002732 | Certified open source hardware | oshwa.org/cert
Parts
124| Qty | Value | Footprint | References |
|---|---|---|---|
| 22 | 0.1u | Capacitor_SMD:C_0402_1005Metric | C10, C12, C14, C15, C16, C17, C18, C19, C21, C24, C26, C27, C28, C29, C33, C36 +6 |
| 18 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C3, C11, C13, C20, C22, C23, C25, C30, C31, C32, C34, C35, C37, C38, C39, C41 +2 |
| 9 | 10K | Resistor_SMD:R_0402_1005Metric | R7, R8, R13, R15, R16, R21, R23, R28, R32 |
| 8 | SHORT | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | R30, R31, SJ1, SJ2, SJ3, SJ4, SJ5, SJ6 |
| 6 | 27 | Resistor_SMD:R_0402_1005Metric | R4, R5, R6, R9, R26, R34 |
| 6 | Fiducial | Fiducial:Fiducial_0.75mm_Mask1.5mm | FID1, FID2, FID3, FID4, FID5, FID6 |
| 5 | 1k | Resistor_SMD:R_0402_1005Metric | R1, R2, R17, R18, R19 |
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H1, H2, H3, H4 |
| 3 | 1N5819WS | Diode_SMD:D_SOD-323 | D5, D6, D7 |
| 3 | 5.1K | Resistor_SMD:R_0402_1005Metric | R10, R24, R33 |
| 2 | 100 | Resistor_SMD:R_0402_1005Metric | R11, R25 |
| 2 | 10p | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 2.2K | Resistor_SMD:R_0402_1005Metric | R14, R29 |
| 2 | 56K | Resistor_SMD:R_0402_1005Metric | R20, R22 |
| 2 | CS1213AGF260 | CUSTOM:PTS820J25KSMTRLFS | SW1, SW2 |
| 2 | DNF | Resistor_SMD:R_0402_1005Metric | R3, R27 |
| 2 | MHPA1010RGBDT | CUSTOM:LED_Cree-PLCC4_1x1mm_CW | D2, D4 |
| 2 | SolderJumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP1, JP2 |
| 2 | W25Q32JVSSIQ | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U2, U8 |
| 1 | 10K | Resistor_SMD:R_Array_Concave_4x0402 | RN1 |
| 1 | 1K | Resistor_SMD:R_0402_1005Metric | R12 |
| 1 | 1N4148WT-7 | Diode_SMD:D_SOD-523 | D1 |
| 1 | 3.3u | RP2350_60QFN_minimal:L_pol_2016 | L1 |
| 1 | ABM8-272-T3 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | APS6404L-3SQN-SN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | BM03B-SRSS-TB | Connector_JST:JST_SH_BM03B-SRSS-TB_1x03-1MP_P1.00mm_Vertical | J5 |
| 1 | Conn_02x20_Odd_Even | RP2040_minimal:PinHeader_2x20_P2.54mm_Vertical_Right | J3 |
| 1 | Conn_02x20_Odd_Even | RP2040_minimal:PinHeader_2x20_P2.54mm_Vertical_Left | J2 |
| 1 | ICE40UP5K-SG48ITR | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U6 |
| 1 | LTST-C191KGKT | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | MF-FSMF035X-2 | Resistor_SMD:R_0603_1608Metric | PTC1 |
| 1 | NCP115AMX120TCG | RP2040_minimal:OnSemi_XDFN4-1EP_1.0x1.0mm_EP0.52x0.52mm | U1 |
| 1 | NCP115AMX330TCG | RP2040_minimal:OnSemi_XDFN4-1EP_1.0x1.0mm_EP0.52x0.52mm | U9 |
| 1 | OSHW ID: US002372 | CUSTOM:OSHW_Dual_0.1_Scale_2140 | LOGO4 |
| 1 | Pb free Logo | CUSTOM:Pb free logo | LOGO3 |
| 1 | RP2350_80QFN | RP2350_60QFN_minimal:RP2350B_QFN-80_EP_10.573x10.573_Pitch0.4mm | U3 |
| 1 | SFV22R-2STE1HLF | RP2350_60QFN_minimal:AMPHENOL_SFV22R-2STE1HLF | J6 |
| 1 | TL431DBZ | Package_TO_SOT_SMD:SOT-23 | U4 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | WEEE Logo | CUSTOM:WEEE logo | LOGO2 |
| 1 | tinyVS Logo | logo1:tiny_13X5_new | LOGO1 |
Similar boards
- 2 layers89 × 83 mm

- 4 layers22.9 × 61 mm

- 2 layers32.1 × 50 mm

Bike voltage regulator rectifier
indoor-industry/bike_voltage_regulator-rectifier
Schematic, PCB and case of a regulator-rectifier for batteryless single-wire stator motorbikes
29 parts - 2 layers48.2 × 57 mm

Sunlu S1-Board
Pegoku/Sunlu-S1-Board
Drop-in replacement controller board for the Sunlu S1 filament dryer.
58 parts15 - 6 layers61 × 101 mm

- 2 layers36 × 20.3 mm

Pmod ft link
chipsalliance/rocket-pcb
PCB libraries and templates for rocket-chip based FPGA/ASIC designs
38 parts21Apache-2.0 - 2 layers22 × 39 mm

Philly Node
tasmaniandroid/Philly_Node
The start of a Philly-Centric mesh node.
77 parts2CERN-OHL-S-2.0 - 8 layers74 × 128 mm

Limejig
taskx6004/limejig
Open-source LimeJig fixture firmware, host tools, KiCad source, and synthetic test examples
92 parts1MIT
Questions
How big is the Pico2-ice PCB?
It measures 27.9 × 63.5 mm and has 4 copper layers, 1.58 mm thick.
What parts does the Pico2-ice use?
124 parts, built around the ICE40UP5K-SG48I, RP2350B, W25Q32JVSSIQ and APS6404L-3SQN-SN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pico2-ice KiCad files?
From the tinyvision-ai-inc/pico2-ice repository on GitHub, at the commit this page was made from: the board is Board/Rev2/pico2-ice.kicad_pcb and its schematic Board/Rev0/pico2-ice.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pico2-ice design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).