2 layers101.8 × 57.8 mm
Sc64v2
Polprzewodnikowy/SummerCart64
SummerCart64 - a fully open source N64 flashcart
96 parts1.2kGPL-3.0
Boards using the STM32G030F6P6
66 boardsBoards in 19 GitHub repositories, designed in KiCad, that use the STM32G030F6P6 by STMicroelectronics (-40℃~+85℃ 12bit 17 2V~3.6V 32 Bit 32KB 64MHz 8KB ARM Cortex-M0+ Built-in+External FLASH TSSOP-20 Microcontrollers (MCU/MPU/SOC) ROHS). See how each wires it, with its parts, size, README and files; the STM32G030F6P6’s symbol, footprint and pinout are on its own page.
- 2 layers62.5 × 47 mm
Philphoc luma
Jana-Marie/philphoc-luma
Zigbee/Hue to WS2812 or similar addressable LED bridge.
45 parts19 - 2 layers101.8 × 57.8 mm
Sc64v2.1
Epicjoy/SC64
This project's hardware and casing are modified based on the SummerCart64 project.
97 parts15 - 2 layers88.9 × 50.8 mm
Business card
maribu/business-card
A PCB based business card using open hardware and free software
131 parts13 - 2 layers16 × 47 mm
- 2 layers88.9 × 50.8 mm
Business card
kevinlutzer/business-card
Showcase project I made to give to potential employers.
71 parts3MIT - 2 layers100 × 15 mm
- 4 layers62 × 45 mm
- 2 layers38 × 100 mm
Nylok Heater
boydportfolio/Nylok-Heater
Two-mode handheld induction-heater controller with KiCad design files, product design rendering, engineering calculations, and full cost analysis.
68 parts - 4 layers16.5 × 48.8 mm
PD boi
charliegilliland/PD_boi
Simple demo board of FUSB302 with STM32G030. USB-C PD negotiation.
22 parts - 2 layers15.7 × 25.9 mm
- 2 layers25 × 43 mm
- 2 layers51.3 × 47.5 mm
- 2 layers188.5 × 167.3 mm
Panel2
sean618/MakerTiles
Modular STM32 electronic-tile system: hardware, firmware, the MicroBus + Field Protocol stack, and a Python daemon.
585 partsMIT - 2 layers50 × 75 mm
- 2 layers84 × 50 mm
I2c sensor node.synth
absmach/synth
Open-source circuit compiler for engineers and AI agents
57 parts29Apache-2.0 - 2 layers31.1 × 34.9 mm
STM32G030F6P6
FloppyO1/Floppy_Boards
Floppy Boards are a series of breakout boards for rapid prototyping which I developed as an alternative of Arduino.
23 parts5CERN-OHL-S-2.0 - 2 layers74.1 × 82.5 mm
STM32G030F6P6
FloppyO1/Floppy_Boards
Floppy Boards are a series of breakout boards for rapid prototyping which I developed as an alternative of Arduino.
159 parts5CERN-OHL-S-2.0 - 2 layers23.4 × 33.3 mm
STM32G030F6P6
FloppyO1/Floppy_Boards
Floppy Boards are a series of breakout boards for rapid prototyping which I developed as an alternative of Arduino.
19 parts5CERN-OHL-S-2.0 - 2 layers60 × 50 mm
Hackeriot board 2024
bmeisels/hackeriot_board
Hackeriot Board is a research target for learning about Hardware Reverse Engineering. The board was used as part of the Hardware Reverse Engineering workshop at the 2024 conference.
39 parts1 - 2 layers35.8 × 28.3 mm
- 2 layers88.6 × 111.4 mm
- 2 layers51.3 × 47.5 mm
- 2 layers
