2 layers59.8 × 30.5 mm
2 layers100 × 15 mm
CellLight
humanHardDrive/CellLight2A shameless copy of the NanoLeaf light
- Size
- 100 × 15 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 26
- Pads
- 132
- Tracks, vias
- 366, 22
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 22 Apr 2019
- Updated
- 20 Aug 2023
Overview
CellLight is an open-source printed circuit board by humanHardDrive, from the humanHardDrive/CellLight repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 15 mm with 30 parts on 26 nets, routed with 366 tracks and 22 vias.
It is built around the STM32G030F6P6, 74LVC1G125 and AP2112K-3.3, with the SN74LVC1T45DBVRE4 and DF01S among its other parts. Its parts include 11 ICs, 6 capacitors, 6 connectors, 3 resistors and 1 switch. It belongs with the STM32 boards of this library.
Main components
5
STM32G030F6P6
TSSOP-20-40℃~+85℃ 12bit 17 2V~3.6V 32 Bit 32KB 64MHz 8KB ARM Cortex-M0+ Built-in+External FLASH TSSOP-20 Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
74LVC1G125
SOT-353SOT-353 Buffers, Drivers, Receivers, Transceivers ROHSWuxi I-core ElecBuffers, Drivers, Receivers, Transceivers
AP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorised
SN74LVC1T45DBVRE4
SOT-23-6-40℃~+85℃ 1 1.65V~5.5V 1.65V~5.5V Bidirectional Level translator Power-off protection、Output enable high-impedance Push-Pull、Tri-State SOT-23-6 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level Shifters
DF01S
SDIP-4-55℃~+150℃ 1.1V@1.5A 1.5A 100V 50A 5uA@100V Single-Phase Rectifier SDIP-4 Bridge Rectifiers ROHSonsemiBridge Rectifiers
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 74LVC1G125 | Package_TO_SOT_SMD:SOT-353_SC-70-5_Handsoldering | U3, U4, U5, U6, U7, U8 |
| 3 | Conn_01x02 | Connector_JST:JST_GH_BM02B-GHS-TBT_1x02-1MP_P1.25mm_Vertical | J2, J3, J4 |
| 3 | R_US | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2, R3 |
| 2 | 0.1u | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C3, C4 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2, C5 |
| 2 | Conn_01x03 | Connector_JST:JST_GH_BM03B-GHS-TBT_1x03-1MP_P1.25mm_Vertical | J5, J6 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_2.7mm_M2.5_Pad | H1, H2 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1 |
| 1 | 4.7u | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C6 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U11 |
| 1 | Conn_01x05 | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J1 |
| 1 | DF01S | df01s:DF01S | CR1 |
| 1 | LM1085-5.0 | Package_TO_SOT_SMD:TO-263-3_TabPin2 | U10 |
| 1 | MB85RC256 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U9 |
| 1 | SN74LVC1T45DBVR | digikey-footprints:SOT-23-6 | U1 |
| 1 | STM32G030F6P6 | stm32g030f6p6:STM32G030F6P6 | U2 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | SW1 |
Questions
How big is the CellLight PCB?
It measures 100 × 15 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CellLight use?
30 parts, built around the STM32G030F6P6, 74LVC1G125, AP2112K-3.3 and SN74LVC1T45DBVRE4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CellLight KiCad files?
From the humanHardDrive/CellLight repository on GitHub, at the commit this page was made from: the board is Cell/Layout/Processor/CellLight.kicad_pcb and its schematic Cell/Layout/Processor/CellLight.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the CellLight design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from humanHardDrive/CellLight
1Similar boards
- 2 layers95.9 × 69.1 mm
- 4 layers136.6 × 54.6 mm
- 2 layers234 × 58 mm
PGA2311 3
dmsd-lab/AMP8611
AMP8611 - open hardware integrated stereo power amplifier with a 2-channel input selector, PGA2311 digital volume control and LM3886 power stages
213 partsCERN-OHL-S-2.0 - 4 layers65 × 56 mm
- 2 layers30 × 60 mm
- 4 layers30.2 × 49.4 mm
- 2 layers44 × 71 mm
- 2 layers101.8 × 57.8 mm
Sc64v2
Polprzewodnikowy/SummerCart64
SummerCart64 - a fully open source N64 flashcart
96 parts1.2kGPL-3.0