2 layers51.3 × 47.5 mm
2 layers51.3 × 47.5 mm
Class 2a
rmd6502/coaster- Size
- 51.3 × 47.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 36
- Nets
- 52
- Pads
- 158
- Tracks, vias
- 0, 0
- Pours
- 1
- Routed
- Not yet
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 2 May 2023
- Updated
- 25 Oct 2024
Overview
Class 2a is an open-source printed circuit board by rmd6502, from the rmd6502/coaster repository on GitHub. It is a 2-layer board of 51.3 × 47.5 mm with 36 parts on 52 nets.
It is built around the STM32G030F6P6, TPS613222ADBV and AMS1117-3.3, with the LR4054-T and WS2812B among its other parts. Its parts include 13 diodes, 8 capacitors, 4 ICs, 3 resistors and 2 connectors. It belongs with the STM32 boards of this library.
Main components
5
STM32G030F6P6
TSSOP-20-40℃~+85℃ 12bit 17 2V~3.6V 32 Bit 32KB 64MHz 8KB ARM Cortex-M0+ Built-in+External FLASH TSSOP-20 Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
TPS613222ADBV
SOT-23-5-40℃~+125℃@(TJ) 1 1.6MHz 5V 6.5uA 900mV~5.5V Boost Boost Built-in Fixed Yes SOT-23-5 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLR4054-T
SOT-23-5L-40℃~+85℃ 1 25uA 4.25V~6V 4.2V 500mA Charging IC Lithium Battery Not supported Not supported SOT-23-5L Battery Management ROHSLRBattery Management
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
README
README.mdcoaster
Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric | C2, C3 |
| 2 | 100nf | Capacitor_SMD:C_0603_1608Metric | C1, C4 |
| 2 | 10uf | Capacitor_SMD:CP_Elec_5x3 | C5, C6 |
| 2 | 4.7u | Capacitor_SMD:CP_Elec_4x3 | C7, C8 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 2 | MountingHole | MountingHole:MountingHole_2.5mm | H1, H2 |
| 1 | 2k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 4.7uh | Inductor_SMD:L_Vishay_IHLP-2020 | L1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-89-3 | U4 |
| 1 | CS2032-LIR rechargeable | Battery:BatteryHolder_Keystone_1060_1x2032 | BT1 |
| 1 | Conn_ARM_JTAG_SWD_10 | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J3 |
| 1 | LR4054 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | R_Potentiometer | Potentiometer_SMD:ALPSALPINE RS08U111Z001 | RV1 |
| 1 | SD103 | Diode_SMD:D_SOD-323F | D13 |
| 1 | STM32G030F6P6 | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | SW_SPST | Button_Switch_SMD:SW_SPDT_PCM12 | SW1 |
| 1 | TPS613222ADBV | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | USB_C_Receptacle | Connector_USB:USB_C_Receptacle_GCT_USB4110 | J1 |
Questions
How big is the Class 2a PCB?
It measures 51.3 × 47.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Class 2a use?
36 parts, built around the STM32G030F6P6, TPS613222ADBV, AMS1117-3.3 and LR4054-T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Class 2a KiCad files?
From the rmd6502/coaster repository on GitHub, at the commit this page was made from: the board is class 2a.kicad_pcb and its schematic Class_Example/Class2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Class 2a design in my own project?
Its repository states no licence, so its author keeps all rights: ask rmd6502 before reusing the design.
More from rmd6502/coaster
3- 2 layers88.6 × 111.4 mm
- 2 layers
Similar boards
- 2 layers188.5 × 167.3 mm
Panel2
sean618/MakerTiles
Modular STM32 electronic-tile system: hardware, firmware, the MicroBus + Field Protocol stack, and a Python daemon.
585 partsMIT - 2 layers60 × 50 mm
Hackeriot board 2024
bmeisels/hackeriot_board
Hackeriot Board is a research target for learning about Hardware Reverse Engineering. The board was used as part of the Hardware Reverse Engineering workshop at the 2024 conference.
39 parts1 - 2 layers84 × 50 mm
I2c sensor node.synth
absmach/synth
Open-source circuit compiler for engineers and AI agents
57 parts29Apache-2.0 - 2 layers35.8 × 28.3 mm
- 2 layers40.5 × 41.3 mm
Horloge
malik019/horloge-accelerometer
Een compact, ultra-low-power PCB-ontwerp in KiCad voor een klok (horloge). Maakt gebruik van een ATtiny MCU, een ST LIS2DW12 accelerometer voor bewegingsdetectie en WS2812B-MINI RGB-leds
76 parts - 2 layers101.8 × 57.8 mm
Sc64v2
Polprzewodnikowy/SummerCart64
SummerCart64 - a fully open source N64 flashcart
96 parts1.2kGPL-3.0 - 2 layers62.5 × 47 mm
Philphoc luma
Jana-Marie/philphoc-luma
Zigbee/Hue to WS2812 or similar addressable LED bridge.
45 parts19 - 2 layers101.8 × 57.8 mm
Sc64v2.1
Epicjoy/SC64
This project's hardware and casing are modified based on the SummerCart64 project.
97 parts15