4 layers28.7 × 27 mm
Neurband c
jlcjak/neurband
Open, minimal sEMG wristband like the Meta Neural Band: 8-ch ADS1298 + nRF52832 BLE, dry gold electrodes on a flex, 3D-printed band. KiCad, FreeCAD, Zephyr, Python, simulations.
70 parts46
Boards using the LSM6DSL
52 boardsBoards in 38 GitHub repositories, designed in KiCad, that use the LSM6DSL by STMicroelectronics (-40℃~+85℃ 1.71V~3.6V 16bit 3uA 4KB IMU (accelerometer + gyroscope) Motion event detection、Synchronization and timestamp SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps LGA-14(2.5x3) Accelerometers ROHS). See how each wires it, with its parts, size, README and files; the LSM6DSL’s symbol, footprint and pinout are on its own page.
- 4 layers50 × 65 mm
FeroFlyF405
Ozonised/FeroFlyF405
FeroFlyF405 an open source STM32F405 based flight controller running INAV
150 parts44CERN-OHL-P-2.0 - 4 layers10 × 61 mm
- 2 layers50.2 × 95.2 mm
- 2 layers100 × 70 mm
- 4 layers35 × 18 mm
RingOne
TheColonelYoung/RingOne
3D air mouse based on STM32 - Can be used for controlling CADs and every other manipulation in 3D space. Is based around STM32L452, IMU LSM6DSL (gyroscope and accelerometer) and Bluetooth low power module RN4871.
85 parts3 - 2 layers149.9 × 134.2 mm
- 4 layers130 × 51 mm
- 4 layers94 × 65.9 mm
- 4 layers89.5 × 62.6 mm
- 4 layers50 × 50 mm
Kamikaze drone
Prachannagven/stm32f765-facial-detection
A project built around the STM32F765VIT6 chip to perform basic facial detection and to act as a flight controller for a micro drone.
92 parts1 - 4 layers89 × 51 mm
Kicad soundcard dev v0
radutolontan/BASM_Pocket_Museum
The Pocket Lab is the next-generation approach to science education. Designed by the Bucharest Applied STEAM Museum, it brings scientific exploration into anyone's hands.
141 parts1 - 2 layers50.3 × 37.8 mm
- 2 layers64 × 70 mm
Capteurs PCB
TITAN-2/2324_projet2A_drone_SousMarin
Ce projet de deuxième année d'école d'ingénieur en électronique informatique vise à concevoir et développer un drone sous-marin contrôlable à distance.
53 parts1 - 2 layers30.2 × 77.8 mm
- 2 layers44 × 51.5 mm
Digipet
alvi-n/TaoTheWearableDigitalPet
Tao is a highly responsive, accessible companion device that uses an accelerometer much like on phones that detect orientation to switch from portrait to landscape mode.
15 parts - 4 layers68.6 × 53.3 mm
Arduino Shield Sensors Template
ane109/nrfDK_Sensor_Dev_Shield
Sensor test board compatible with nRFDK and Arduino development boards
47 parts - 2 layers28 × 18 mm
Final project
Casasaviruz/Wearable-biosensor-PCB
A battery powered double sided PCB sensor meant to monitor the heart rate, breathing, temperature and sleep and active cycles of lab mice, made as small and non invasive as possible, data is transmitted through Bluetooth
37 parts - 2 layers70 × 59 mm
- 4 layers70 × 50 mm
DumbFCC
Curtis-05/DumbFCC
Custom Flight controller for ENG 4012 Aerospace Design Project 4 2025/26 via Glasgow University.
79 partsMIT - 4 layers75 × 38.6 mm
HuffAndPuff
dmanla/AccessibilityHeadsetDevkit
A development kit for the creation of an accessibility driven platform.
149 parts - 2 layers68 × 84 mm
- 2 layers148.3 × 147.1 mm
- 4 layers60.8 × 59.3 mm
Imu
kayneyao/localization-io
A breakout board for the LSM6DSL 6 axis accel-gyro combo and the LIS2MDL 3 axis mag
45 parts