2 layers27.7 × 14.4 mm
Laser lipo
noahp/laser_lipo
Simple board to integrate a laser power supply and a lipo battery charger.
15 parts
4 layers68.6 × 53.3 mm
Arduino Shield Sensors Template
ane109/nrfDK_Sensor_Dev_ShieldSensor test board compatible with nRFDK and Arduino development boards
- Size
- 68.6 × 53.3 mm
- Copper layers
- 4
- Thickness
- 1.57 mm
- Parts
- 47
- Nets
- 55
- Pads
- 198
- Tracks, vias
- 240, 40
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 28 May 2025
- Updated
- 23 Jun 2025
Overview
Arduino Shield Sensors Template is an open-source printed circuit board by ane109, from the ane109/nrfDK_Sensor_Dev_Shield repository on GitHub. It is a 4-layer board of 68.6 × 53.3 mm with 47 parts on 55 nets, routed with 240 tracks and 40 vias.
It is built around the MAX86150EFF+T, LP3985 and LSM6DSL, with the TCA9617ADGK among its other parts. Its parts include 13 capacitors, 7 connectors, 6 resistors and 6 ICs. It belongs with the sensors and measurement and microcontroller boards boards of this library.
Main components
4
MAX86150EFF+T
LGA-22(3.3x5.6x0.5)-40℃~+85℃ Integrated ambient light cancellation (ALC)、With proximity detection function、Supports ECG measurement、Supports simultaneous PPG and ECG measurement LGA-22(3.3x5.6x0.5) Heart Rate Sensors ROHSMaxim Integrated (Analog Devices)Heart Rate SensorsLP3985
UncategorisedTexas Instruments
LSM6DSL
LGA-14(2.5x3)-40℃~+85℃ 1.71V~3.6V 16bit 3uA 4KB IMU (accelerometer + gyroscope) Motion event detection、Synchronization and timestamp SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps LGA-14(2.5x3) Accelerometers ROHSSTMicroelectronicsAccelerometers
TCA9617ADGK
TSSOP8Level-Translating FM+ I2C Bus RepeaterTexas InstrumentsUncategorised
README
README.mdnrfDK_Sensor_Dev_Shield
Sensor shield compatible with nRFDK and Arduino development boards
Details
- Test platform for sensors intended for use on an IoT wearable
- Interfaces directly with an nRF9160DK development board over I2C
- Contains a heart rate monitor, 9-DOF IMU, and coulomb counter with reversible current
- Test points for all signals and voltages
Parts
47| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | 3V3SUPPLY, 5V1, GND, SCL, SCLB, SDA, SDAB, U1_INTB, U3_INT1, U3_INT2, VDD_IO |
| 9 | 1uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C7, C10, C12 |
| 5 | 4.7k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5 |
| 4 | MountingHole_3.2mm | Arduino_MountingHole:MountingHole_3.2mm | MH1, MH2, MH3, MH4 |
| 3 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C8, C11, C13 |
| 3 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5, J7, J8 |
| 1 | 0.01uF | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | 0.075 | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | Analog | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J3 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | U5 AL/CC OUT |
| 1 | Digital/PWM | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J2 |
| 1 | Digital/PWM | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J4 |
| 1 | LP3985 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U2 |
| 1 | LSM6DSL | CW_Custom_Library:LSM6DSL_extended | U3 |
| 1 | LTC2942 | CW_Custom_Library:LTC2942_Extended | U5 |
| 1 | MAX86150EFF | CW_Custom_Library:MAX86150_extended | U1 |
| 1 | Power | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | TCA9617A | Package_SO:VSSOP-8_3.0x3.0mm_P0.65mm | U4 |
Questions
How big is the Arduino Shield Sensors Template PCB?
It measures 68.6 × 53.3 mm and has 4 copper layers, 1.57 mm thick.
What parts does the Arduino Shield Sensors Template use?
47 parts, built around the MAX86150EFF+T, LP3985, LSM6DSL and TCA9617ADGK. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Arduino Shield Sensors Template KiCad files?
From the ane109/nrfDK_Sensor_Dev_Shield repository on GitHub, at the commit this page was made from: the board is Project_Files/Arduino_Shield_Sensors_Template.kicad_pcb and its schematic Project_Files/Arduino_Shield_Sensors_Template.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Arduino Shield Sensors Template design in my own project?
Its repository states no licence, so its author keeps all rights: ask ane109 before reusing the design.
Similar boards
- 4 layers135.8 × 149.3 mm
TapBadgeV2
Xasin/TapBadgeV2
The second, far more ambitious version of the TapBadge wearable
110 parts6GPL-3.0 - 4 layers57 × 35 mm
- 4 layers28.7 × 27 mm
Neurband c
jlcjak/neurband
Open, minimal sEMG wristband like the Meta Neural Band: 8-ch ADS1298 + nRF52832 BLE, dry gold electrodes on a flex, 3D-printed band. KiCad, FreeCAD, Zephyr, Python, simulations.
70 parts46 - 4 layers50 × 65 mm
FeroFlyF405
Ozonised/FeroFlyF405
FeroFlyF405 an open source STM32F405 based flight controller running INAV
150 parts44CERN-OHL-P-2.0 - 4 layers10 × 61 mm
- 2 layers50.2 × 95.2 mm
- 2 layers100 × 70 mm
