4 layers36 × 36 mm
Boards using the LPS22HH
19 boardsBoards in 15 GitHub repositories, designed in KiCad, that use the LPS22HH by STMicroelectronics (-40℃~+85℃ 0.025hpa 0.5hpa 1.7V~3.6V 26Kpa~1.26bar 900nA I2C、SPI On-chip temperature compensation、Integrated ADC and digital interface、On-chip calibration and non-volatile storage、Integrated signal amplifier、On-chip temperature output HLGA-10(2x2) Pressure Sensors ROHS). See how each wires it, with its parts, size, README and files; the LPS22HH’s symbol, footprint and pinout are on its own page.
- 2 layers43 × 43 mm
Iec62386-panel
peterisza/iec62386-wall-panel
Wall panel for smart homes. 2 wires, no polarity, arbitrary bus topology, exchangeable front panel with hardware capacitive buttons, temperature+humidity+pressure+CO2.
64 parts2 - 8 layers50 × 50 mm
- 4 layers100 × 100 mm
Central ECU
UC-Aerospace/Hybrid25_ECU
The central ECU is pretty simple and carries out a couple of tasks. Firstly is comms which is easy to see with CAN on the left and RS422 on the right of the schematic.
180 parts1 - 4 layers40.8 × 40.8 mm
- 4 layers96 × 81 mm
- 2 layers
Drone controller
C-monC/Drone-simluation
Experimenting with reinforcement learning for drone control.
12 parts - 4 layers55.9 × 30.5 mm
- 8 layers50 × 50 mm
- 4 layers35.1 × 33.5 mm
- 2 layers90 × 90 mm
Sahel solar
Aliou8/SAHEL-SPECTRA-RF
CubeSat for educational purposes. It is based on an STM32H7 MCU for data handling and uses two CC1125 radios for communication. The software is developed using a Zephyr-like RTOS.
59 parts2GPL-3.0 - 4 layers48.3 × 48.3 mm
- 4 layers21.5 × 11.5 mm
- 2 layers48.3 × 48.3 mm
- 4 layers48.3 × 48.3 mm
- 2 layers48.3 × 48.3 mm
- 4 layers100 × 50 mm
Dev board
iamdarshg/dev-board
Self-contained project: board + schematics + libraries. Unzip anywhere and open dev-real.kicadpro in KiCad 9.
177 parts1 - 4 layers37 × 45 mm
Weather Kit Project
Mikecerc/WeatherKit_MainBoard
KiCAD Schematic Files for the weatherkit main board
39 parts - 6 layers60.4 × 98.3 mm
