Boards using the LPS22HB

27 boards

Boards in 23 GitHub repositories, designed in KiCad, that use the LPS22HB by STMicroelectronics (-40℃~+85℃ 0.1hpa 0.1hpa 1.7V~3.6V 1uA 26Kpa~1.26bar I2C、SPI On-chip temperature compensation、Integrated ADC and digital interface、On-chip calibration and non-volatile storage、Integrated signal amplifier、On-chip temperature output HLGA-10(2x2) Pressure Sensors ROHS). See how each wires it, with its parts, size, README and files; the LPS22HB’s symbol, footprint and pinout are on its own page.

6 layers39.5 × 39.5 mm
P4eregrine
anticitizn/p4eregrine
All-in-one ESP32 P4-based drone ESC, flight controller, and video processor
359 parts21
4 layers68.8 × 90.3 mm
Horizon
Horizon-Avionics/Horizon-H1
Building a fully open-source flight computer for amateur rocketry!
173 parts17
8 layers38 × 38 mm
Kolibri v0.5
bastian2001/Kolibri-FC-Hardware
Hardware for the Kolibri Flight Controller. 30mm/20mm FC with RP2350 + ELRS onboard
221 parts8GPL-3.0
2 layers100 × 70 mm
CPU Board
jsjolund/sailoraid
Sensor package for the Laser Pico sail boat
116 parts3
4 layers23.4 × 25.4 mm
Low Power LoRa
SorenGilkeyJohnson/LowLoRa
A solar powered, batteryless LoRa (expandable) sensor node powered from a supercapacitor charged by a small solar cell using an energy harvester.
70 parts3CERN-OHL-S-2.0
2 layers83.2 × 48.3 mm
Dronelight
ReclaimerLabs/Dronelight
A 100 W LED spotlight for your drone
81 parts2
4 layers40 × 75 mm
CUR flight computer 25-26
CU-Rocketry/flight_computer
Competition Flight Computer Module 25-26
169 parts1
2 layers75 × 40.5 mm
Caelum v2
Fabiancrg/Caelum
Caelum Weather Station (HW v2.0 with complete 3D parts)
40 parts1
2 layers26.3 × 45.1 mm
Skydiving altimeter
kkingsbe/AltimeX-Skydiving-Altimeter-PCB
This repo contains the PCB files for an open-source ColorAlti analog that I created, which can be made for about $30.
38 parts1
2 layers52 × 71.2 mm
Dragonfly v0-1 Ribs
aravindjayan/DragonFly_FC
Flight Controller for flying things based on RP2350A MCU
191 parts
2 layers102.9 × 103.7 mm
Drone ESP32
Asaf66/Drone_ESP32
Rev 2 fixes the issues found while assembling the first board:
80 parts
4 layers59 × 59 mm
Flight controller
bachaaymene/stm32-flight-controller
Custom 4-layer flight controller PCB for an F450 quadcopter. STM32F405, LSM6DSO IMU, LPS22HB barometer, USB-C. Designed in KiCad.
65 parts
2 layers32 × 32 mm
LPSN
Filip-Kubecki/PCB-projects
Kicad files for PCB projects
19 parts
4 layers65 × 56 mm
Hs sensor shield
Heimonen-Solutions-AS/hs-sensor-shield

14 parts
4 layers75.6 × 100 mm
Flight log
knivier/SkyCell
The telecommunications solution on a balloon...for broke people alike.
208 partsMIT
2 layers114 × 62 mm
Badge
Kreyl/BmstuBadge

148 parts
2 layers40 × 42.5 mm
Proves PCB Challenge
spoonprogram/Proves_PCB_Challenge
PCB Challenge Submission
39 parts
2 layers
MPCDrone
Tobi-McKellar/Drone
A project aiming to develop a drone and the associated PID/MCP control systems.
39 parts
4 layers25.8 × 35.7 mm
Rcbuggtelem
tomo900/BuggyIMU_PCBA

47 parts
2 layers18.2 × 10 mm
Sense
UC-Aerospace/Sense
MicroSense is a sensor package for the UCA Electrical Tutorials for 2024. It is a 18.24x10mm 2 layer PCB with the following sensors:
12 parts
8 layers29.4 × 29.4 mm
Kolibri v0.6
bastian2001/Kolibri-FC-Hardware
Hardware for the Kolibri Flight Controller. 30mm/20mm FC with RP2350 + ELRS onboard
201 parts8GPL-3.0
2 layers99.7 × 70 mm
CPU Board
jsjolund/sailoraid
Sensor package for the Laser Pico sail boat
112 parts3
2 layers40 × 59.2 mm
Dragonfly v0 1
aravindjayan/DragonFly_FC
Flight Controller for flying things based on RP2350A MCU
103 parts
4 layers
Device
jayis1/hardware-design-lab
Full-cycle hardware device designs — each device in its own subfolder with architecture, schematics, PCB layout, and software stack
16 parts