4 layers100.1 × 60.2 mm
Hades
pms67/HadesFCS
Complete flight control system designed from scratch. Hardware designed with KiCad.
215 parts1kBSD-3-Clause
Boards using the LD39200PU33R
19 boardsBoards in 17 GitHub repositories, designed in KiCad, that use the LD39200PU33R by STMicroelectronics (-40℃~+125℃@(Tj) 1 100uA 130mV@(2A) 2A 3.3V 40uVrms 6V 70dB@(1kHz) Fixed Positive Short Circuit Protection、Thermal shutdown、Enable control、Operating status indication、Reverse-polarity current protection DFN-6(3x3) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS). See how each wires it, with its parts, size, README and files; the LD39200PU33R’s symbol, footprint and pinout are on its own page.
- 4 layers82.8 × 33 mm
E ink watch
sandgum/Triangulate-ES_01-Watch
A 5mm thick smartwatch which uses an E-ink display and two OLEDs to display information while consuming very little power
162 parts22 - 4 layers33 × 90 mm
Active drag system
RocketryVT/active-drag-system
Eigen Library, cmake, and arm-none-eabi-gcc tooling required for successful build.
100 parts6MIT - 4 layers70.8 × 100 mm
- 4 layers110 × 90 mm
- 4 layers65 × 44 mm
- 4 layers
- 2 layers21 × 51 mm
RP2354A MCU
AatriRaj/RP2354A_MCU_DEV_BOARD
A custom RP2354A-based development board designed for embedded systems prototyping and hardware development. The board features USB connectivity, onboard power regulation, BOOTSEL and reset controls, SWD debugging…
39 parts - 4 layers53.5 × 53.5 mm
MiniTULPAR
ErdemHtyl/Tulpar_Mini_FCB
This project is under active development. The table below shows what is finished and what is still in progress:
92 partsBSD-3-Clause - 2 layers40 × 60 mm
MAIN LITE
isc-fs/IFS08-ES-MainLite
MainLite: minimal STM32H733ZG module (AMS / ECU / uDV on a backplane) — KiCad design + machine-readable pin model
80 parts - 4 layers101.5 × 71.5 mm
Pantalla
jbmata/stm32h743-touchgfx-display
STM32H743 firmware for a TouchGFX display with CAN telemetry, SD logging, and project documentation
106 parts - 4 layers107.5 × 60 mm
- 4 layers140 × 70 mm
- 6 layers45 × 115 mm
- 4 layers60 × 60 mm
- 4 layers33 × 81.8 mm
Active drag system minimal
RocketryVT/active-drag-system
Eigen Library, cmake, and arm-none-eabi-gcc tooling required for successful build.
86 parts6MIT - 4 layers70.3 × 73.2 mm
- 2 layers21.5 × 16 mm
Power regulator
ParagChoukekar/PCB_DESIGNS
This is an experimental PCB design focused on power regulation, converting a 24V DC input to regulated 5V and 3.3V outputs while keeping the bill of materials (BOM) minimal.
9 partsMIT - 4 layers86 × 62 mm
Robo con Wi Fi v2
tmcit-ararobo-2026a/robo-con-for-Wi-Fi
the code and pcb in this repository is wireless robot's controller.
107 partsMIT