Skip to the content
1234567

LD39200PU33R

STMicroelectronicsExtended

-40℃~+125℃@(Tj) 1 100uA 130mV@(2A) 2A 3.3V 40uVrms 6V 70dB@(1kHz) Fixed Positive Short Circuit Protection、Thermal shutdown、Enable control、Operating status indication、Reverse-polarity current protection DFN-6(3x3) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
st/LD39200PU33R
Category
Uncategorised
Package
DFN-6(3x3)
Pins
7
In stock
2,641 at JLCPCB (C222192)
Used on
19 open-source boards

Overview

The LD39200PU33R is an uncategorised made by STMicroelectronics in a DFN-6(3x3) package with 7 pins. -40℃~+125℃@(Tj) 1 100uA 130mV@(2A) 2A 3.3V 40uVrms 6V 70dB@(1kHz) Fixed Positive Short Circuit Protection、Thermal shutdown、Enable control、Operating status indication、Reverse-polarity current protection DFN-6(3x3) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:LD39200PU33R, from EasyEDA) and its footprint (EasyEDA_Cloud:DFN-6_L3.0-W3.0-P0.95-BL-EP, from EasyEDA), ready for a KiCad board. 2,641 are in stock at JLCPCB (part C222192). 19 open-source boards in 17 repositories on GitHub use it.

Symbol

1OUT2ADJ/SENSE3GND5EN6IN4PG7EPAD
EasyEDA_Cloud:LD39200PU33RFrom EasyEDA

Footprint

1234567
EasyEDA_Cloud:DFN-6_L3.0-W3.0-P0.95-BL-EPFrom EasyEDA

Pinout

7
The pins of the LD39200PU33R
PinNameType
1OUTUnspecified
2ADJ/SENSEUnspecified
3GNDUnspecified
4PGUnspecified
5ENUnspecified
6INUnspecified
7EPADUnspecified

Open-source boards using it

19See all 19
  • 4 layers100.1 × 60.2 mmHades, the printed circuit board in 3D

    Hades

    pms67/HadesFCS

    Complete flight control system designed from scratch. Hardware designed with KiCad.

    215 parts1kBSD-3-Clause
  • 4 layers82.8 × 33 mmE ink watch, the printed circuit board in 3D

    E ink watch

    sandgum/Triangulate-ES_01-Watch

    A 5mm thick smartwatch which uses an E-ink display and two OLEDs to display information while consuming very little power

    162 parts22
  • 4 layers33 × 90 mmActive drag system, the printed circuit board in 3D

    Active drag system

    RocketryVT/active-drag-system

    Eigen Library, cmake, and arm-none-eabi-gcc tooling required for successful build.

    100 parts6MIT
  • 4 layers70.8 × 100 mmFlapjack, the printed circuit board in 3D

    Flapjack

    Caleb646/Flapjack

    A custom VTOL drone platform — from airframe to PCB to firmware.

    116 parts4
  • 4 layers110 × 90 mmURC, the printed circuit board in 3D

    URC

    spikonado/URC

    Universal Robot Controller

    180 parts2CERN-OHL-W-2.0
  • 4 layers65 × 44 mmBt lora transciever, the printed circuit board in 3D

    Bt lora transciever

    dylandibeneditto/bt-lora-transciever

    2.4GHz and 915MHz telemetry board

    112 parts1
  • 4 layersStereo heli, the printed circuit board in 3D

    Stereo heli

    Kronos3/stereo-heli

    Stereo Vision Quadcopter

    173 parts1Apache-2.0
  • 2 layers21 × 51 mmRP2354A MCU, the printed circuit board in 3D

    RP2354A MCU

    AatriRaj/RP2354A_MCU_DEV_BOARD

    A custom RP2354A-based development board designed for embedded systems prototyping and hardware development. The board features USB connectivity, onboard power regulation, BOOTSEL and reset controls, SWD debugging…

    39 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LD39200PU33R?

Yes. The symbol is EasyEDA_Cloud:LD39200PU33R and the footprint EasyEDA_Cloud:DFN-6_L3.0-W3.0-P0.95-BL-EP, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LD39200PU33R?

DFN-6(3x3), with 7 pins. Its footprint is drawn on this page.

Where is the LD39200PU33R datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the LD39200PU33R?

JLCPCB lists it as part C222192, with 2,641 in stock; the sellers' links on this page open their listings.

What can replace the LD39200PU33R?

Parts like it in the library: the SPX1587AT-L-3-3/TR-TUDI by Tudi, the LT1764AEQ-3.3-TUDI by Tudi, the LM1085IT-3.3/NOPB-TUDI by Tudi and the XBL29300S-3.3DTR by XBLW. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LD39200PU33R?

19 boards in 17 repositories on GitHub; the most starred are listed on this page, with their KiCad files.