Skip to the content

Boards using the ESDA25P35-1U1M

37 boards

Boards in 33 GitHub repositories, designed in KiCad, that use the ESDA25P35-1U1M by STMicroelectronics (-55℃~+150℃ 1 1.4kW@8/20us 200nA 22V 24.6V 35A@8/20us 41V IEC 61000-4-2 TVS Unidirectional DFN1610-2 ESD and Surge Protection (TVS/ESD) ROHS). See how each wires it, with its parts, size, README and files; the ESDA25P35-1U1M’s symbol, footprint and pinout are on its own page.

  • 10 layers180 × 100 mmJetson agx thor baseboard, the printed circuit board in 3D

    Jetson agx thor baseboard

    antmicro/jetson-agx-thor-baseboard

    Open hardware baseboard for Nvidia Jetson Thor AGX T5000 System on Module

    1,213 parts48Apache-2.0
  • 10 layers120 × 120 mmK410t devboard, the printed circuit board in 3D

    K410t devboard

    antmicro/kintex-410t-devboard

    This repository contains open hardware design files for a devkit created for AMD-Xilinx Kintex-7 K410T FPGA.

    1,020 parts46Apache-2.0
  • 2 layers75.8 × 19.2 mm3S coinCellChargeController, the printed circuit board in 3D

    3S coinCellChargeController

    PocketConcepts/Pocket_PSU

    A variable current & voltage PSU with 3S lipo charging, balancing, and protection circuit using PPS.

    78 parts36
  • 4 layers58 × 135 mmOculink to pcie adapter, the printed circuit board in 3D

    Oculink to pcie adapter

    antmicro/oculink-pcie-adapter

    PCB design which converts an OCuLink connector into x16 PCIe slot

    165 parts22Apache-2.0
  • 4 layers89 × 38 mmHotPlate, the printed circuit board in 3D

    HotPlate

    Markuselectronics/DIY-USB-C-Reflow-Hotplate

    A compact, open-source DIY Reflow Hotplate powered by USB-C PD and STM32. Features a custom aluminum PCB heater, OLED display, and PID temperature control for portable SMD soldering.

    82 parts7
  • 4 layers80 × 50.5 mmLoeti, the printed circuit board in 3D

    Loeti

    elagil/loeti

    Soldering equipment for JBC irons

    110 parts5
  • 4 layers394 × 110 mmGpu cluster backplane, the printed circuit board in 3D

    Gpu cluster backplane

    antmicro/gpu-cluster-backplane

    This project contains open hardware design files for a PCB supporting power distribution in a cluster composed of GPUs. This board has been derived from an open source d1600e-psu-breakout created by Antmicro.

    616 parts4Apache-2.0
  • 2 layers120 × 100 mmUsb pd pico controller, the printed circuit board in 3D

    Usb pd pico controller

    flummer/sao-wall

    Design for a SAO display PCB, power and control board

    64 parts2CC-BY-SA-4.0
  • 2 layers65 × 56 mmPcb power hat, the printed circuit board in 3D

    Pcb power hat

    kuon/pcb-pihat-pwr

    Power input hat for Raspberry Pi

    30 parts2Apache-2.0
  • 6 layers120 × 70 mmHealthypi 6 v5, the printed circuit board in 3D

    Healthypi 6 v5

    Protocentral/protocentral_healthypi6_hardware

    Open hardware design files for HealthyPi 6 — STM32H757 vital-signs monitor with the HealthyLink modular expansion bus

    247 parts2CERN-OHL-P-2.0
  • 2 layers38 × 24 mmBMS, the printed circuit board in 3D

    BMS

    SMalasGit/2s-BMS

    A repository for a 2s lithium ion BMS that utilizes the BQ28Z620. This IC is an all-in-one chip that features battery protection, cell balancing, battery charging, battery current and voltage monitoring, and gas gauging…

    82 parts2
  • 4 layers79.4 × 56.2 mmUSBLabTool, the printed circuit board in 3D

    USBLabTool

    bradencamp/ECE-Lab-USB-MultiTool

    This USB Multi-function Laboratory Instrument will be inexpensive and therefore less capable than the AD2 or ADALM 2000 while still fulfilling the requirements for most laboratory exercises in the undergraduate ECE…

    250 parts1
  • 4 layers90 × 60 mmBench psu, the printed circuit board in 3D

    Bench psu

    PaulBichl/VibePCB-bench-psu

    USB-C PD (20 V) powered bench supply, 2 independent channels, 1.6-16.6 V / 3 A each, constant voltage / constant current, designed with VibePCB.

    206 parts1
  • 4 layers62.3 × 94.3 mmSTM32N6 Thesis Board, the printed circuit board in 3D

    STM32N6 Thesis Board

    tobiasbaas/Roboterarm1

    Herzlich willkommen zum Repo des Robotersarmes der Arbeitsgruppe. Bitte beachtet, dass es sich hierbei handelt um eine Erweiterung bereits vorhandener Infrastruktur.

    221 parts1
  • 4 layers105 × 65 mmFT2D PD20V 12V5 3A 原型板, the printed circuit board in 3D

    FT2D PD20V 12V5 3A 原型板

    Accelerator6666/Yaesu-FT2D-USBC-charge

    检查日期:2026-10-26;KiCad 10.0.7;目标板厂:嘉立创 JLCPCB;目标工艺:4 层 PCB + SMT 代贴片。

    58 parts
  • 4 layers35 × 35 mmCanonical, the printed circuit board in 3D

    Canonical

    AnasSarkiz/smart-nema14-motor-controller

    STEPPERONLINE 14HM11-0404S controller — unrouted work-in-progress prototype; mechanical and electrical qualification pending

    213 parts
  • 4 layers87.7 × 80.2 mmLedcube, the printed circuit board in 3D

    Ledcube

    Flawake/Ledcube

    287 parts
  • 6 layers50 × 50 mmPCB1 Controller, the printed circuit board in 3D

    PCB1 Controller

    Jdowdy05/PointTaken

    Point Taken — an optical tactile fingertip based on the TMF8829

    153 parts
  • 2 layers57.4 × 56.9 mmWeltkatze, the printed circuit board in 3D

    Weltkatze

    KorewaKiyo/weltkatze

    An RGB cat lamp capable of syncing over the local network or worldwide with a server

    90 parts
  • 4 layers85 × 59 mmESPHome Parking Assistant, the printed circuit board in 3D

    ESPHome Parking Assistant

    mikelawrence/ESPHome-Parking-Assistant

    Use a TFMini LiDAR module and a RGB light strip so you can park your car in the same spot everytime!

    114 partsCERN-OHL-P-2.0
  • 12 layers138 × 102.7 mmSodimm ddr5-tester, the printed circuit board in 3D

    Sodimm ddr5-tester

    ryanlopez26/ddr5_tester

    The Antmicro tester with current sensing capabilities

    730 partsApache-2.0
  • 4 layers63.5 × 36.1 mmSmallLedPlatform, the printed circuit board in 3D

    SmallLedPlatform

    Skrooter/SmallLedPlatform

    A small PCB for controlling WS2812 LEDS with an STM32. Powered via USBPD and has USB communication

    125 parts