Skip to the content

Boards using the SMLVN6RGB1U1

29 boards

Boards in 23 GitHub repositories, designed in KiCad, that use the SMLVN6RGB1U1 by ROHM Semiconductor (-40℃~+85℃ 0.6mm 2.8mm 3.5mm 400mW B:400mcd、R:700mcd、G:1200mcd Discrete Diode G:520nm~535nm、B:465nm~475nm、R:61nm~629nm R:2.1V、B:3.3V、G:3.3V R:50mA、G:40mA、B:40mA White Frosted Lens SMD2835-6P RGB LEDs ROHS). See how each wires it, with its parts, size, README and files; the SMLVN6RGB1U1’s symbol, footprint and pinout are on its own page.

  • 4 layers68.8 × 90.3 mmHorizon, the printed circuit board in 3D

    Horizon

    Horizon-Avionics/Horizon-H1

    Building a fully open-source flight computer for amateur rocketry!

    173 parts17
  • 2 layers74 × 74 mmKarakatitsa 2, the printed circuit board in 3D

    Karakatitsa 2

    KarakatitsaRISCV/riscv-asm

    80 parts8MIT
  • 4 layers98.7 × 104 mmFlight Controller, the printed circuit board in 3D

    Flight Controller

    ThaoMinhHoang/350_Flight_controller

    ECTE350 storage room for Locus team

    233 parts3
  • 4 layers52.5 × 82.2 mmSTM32F407XX DEV. BOARD, the printed circuit board in 3D

    STM32F407XX DEV. BOARD

    Cosmas-cmd/STM32F407VGTX-DEVELOPMENT-BOARD

    A custom STM32F407VGTx development board designed in KiCad 9.0, featuring the STM32F407 (LQFP100, Cortex-M4F @ 168 MHz) with an external crystal, USB Type-C power input, onboard microSD card and much more...

    62 parts2
  • 2 layers40 × 70 mmKinetiCoreDC, the printed circuit board in 3D

    KinetiCoreDC

    axpaul/KinetiCoreDC

    Compact STM32G0-based DC motor controller board featuring TI DRV8874 H-bridge drivers, RS485 communication, optoisolated I/O, and hardware power protection.

    183 parts1CERN-OHL-S-2.0
  • 4 layers76 × 51.5 mmFlight stick, the printed circuit board in 3D

    Flight stick

    hpvdt/Falcon_flight_stick

    Flight Stick HW and SW files for the Falcon Aircraft

    60 parts1
  • 2 layers80 × 100 mmStm32, the printed circuit board in 3D

    Stm32

    Adamos-khalilos/stm32f407VGTx-dev-board-PCB-

    A custom STM32F407VGTx development board featuring a microSD card slot, SWD debug header, wake-up button, RGB status LEDs, and a clean decoupled power supply. Designed entirely in KiCad.

    61 partsMIT
  • 2 layers81.7 × 61.8 mmBms okmr, the printed circuit board in 3D

    Bms okmr

    AndreCox/OKMR_BMS

    BMS Designed for the Okanagan Marine Robotics Club

    102 parts
  • 6 layers60 × 25 mmServo, the printed circuit board in 3D

    Servo

    brokenpotatoes/Servo

    71 parts
  • 4 layers95 × 78 mmSmart db, the printed circuit board in 3D

    Smart db

    c-lydia/SmartDB

    A distribution board system designed for automatic electrical fault monitoring using Digital Signal Processing (FFT analysis), Isolation Forest, and YOLO thermal imaging detection with a Mobile App, alerting system, and…

    82 partsApache-2.0
  • 2 layers40 × 60 mmLeds penguin, the printed circuit board in 3D

    Leds penguin

    COKPOWEHEU/MailNotifer_ch32

    My version of Mail Notifer by RISO KAGAKU

    30 partsMIT
  • 4 layers75.6 × 100 mmFlight log, the printed circuit board in 3D

    Flight log

    knivier/SkyCell

    The telecommunications solution on a balloon...for broke people alike.

    208 partsMIT
  • 2 layers59 × 83 mmSciencefestivalpcb, the printed circuit board in 3D

    Sciencefestivalpcb

    kongr45gpen/puzzle-pcb

    PCB for Science Festival 2023

    70 parts
  • 4 layers77.9 × 81.6 mmLilygo, the printed circuit board in 3D

    Lilygo

    Ndambia/lilygo

    A custom 4-layer KiCad PCB design integrating an ESP32 Wi-Fi/Bluetooth microcontroller with a SIM7600G-H 4G LTE Cat-4 cellular module, comprehensive power management, GPS tracking, GPRS connectivity, USB-C charging…

    188 parts
  • 4 layers43.5 × 53.1 mmVanguard new, the printed circuit board in 3D

    Vanguard new

    SpacePicklesRocketry/2025-Electrical-2

    New electrical repo(buggy old one)

    100 parts
  • 4 layers15.7 × 40.1 mmPikey, the printed circuit board in 3D

    Pikey

    Thenewtechgu/Pikey

    My verson of a usb rubber ducky that can also be used as a storage device

    49 parts
  • 2 layers121 × 121 mmGlobal ESP32S3 PCB, the printed circuit board in 3D

    Global ESP32S3 PCB

    TiTooom/Global_ESP32S3_PCB

    Carte électronique ESP32-S3-WROOM-U1 permettant de controller : - Jusqu'à 3 NEMA 17 - 3 Capteurs TOF VL53L0X (i2c) - 1 écran OLED 0.96 12864 (i2c) - Buzzer - LiDAR

    85 parts
  • 4 layers42.3 × 51.9 mmVanguard new, the printed circuit board in 3D

    Vanguard new

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    93 parts915
  • 2 layers60.3 × 46.3 mmMcu holder, the printed circuit board in 3D

    Mcu holder

    AlaaSaadAbdo/Rommana

    A 30 key well powered by Xiao BLE

    48 parts105
  • 2 layers70 × 40 mmGOD DC MD, the printed circuit board in 3D

    GOD DC MD

    TOBA-Robocon/NHK_2025_circuit_public_var

    鳥羽商船Aチームが2025年度のNHK高専ロボコンで使用した基板(公開用に多少編集済み)

    47 parts1
  • 2 layers75.5 × 65 mmNext main Control, the printed circuit board in 3D

    Next main Control

    TOBA-Robocon/NHK_2025_circuit_public_var

    鳥羽商船Aチームが2025年度のNHK高専ロボコンで使用した基板(公開用に多少編集済み)

    55 parts1
  • 2 layers80 × 80 mmSUTEハブ, the printed circuit board in 3D

    SUTEハブ

    TOBA-Robocon/NHK_2025_circuit_public_var

    鳥羽商船Aチームが2025年度のNHK高専ロボコンで使用した基板(公開用に多少編集済み)

    67 parts1