Skip to the content
2 layers74 × 74 mmKarakatitsa 2, the printed circuit board in 3D
Size
74 × 74 mm
Copper layers
2
Thickness
1.6 mm
Parts
80
Nets
125
Pads
345
Tracks, vias
1,299, 8
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
27 Apr 2022
Updated
25 Jul 2025

Overview

Karakatitsa 2 is an open-source printed circuit board by KarakatitsaRISCV, from the KarakatitsaRISCV/riscv-asm repository on GitHub, published under the MIT licence. It is a 2-layer board of 74 × 74 mm with 80 parts on 125 nets, routed with 1,299 tracks and 8 vias.

It is built around the SMLVN6RGB1U1. Its parts include 43 resistors, 7 capacitors, 6 connectors and 2 ICs. It belongs with the STM32 boards of this library.

Main components

1

Parts

80
QtyValueFootprintReferences
42RResistor_SMD:R_0805_2012MetricR1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +26
17SMLVN6RGBLED_SMD:LED_RGB_Cree-PLCC-6_6x5mm_P2.1mmHL1, HL2, HL3, HL4, HL5, HL6, HL7, HL8, HL10, HL11, HL12, HL13, HL14, HL15, HL16, HL17 +1
44016Package_DIP:DIP-14_W7.62mm_LongPadsDD1, DD2, DD3, DD4
31.0Capacitor_THT:C_Disc_D7.5mm_W2.5mm_P5.00mmC4, C5, C7
222Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mmC1, C2
247.0Capacitor_THT:CP_Radial_D6.3mm_P2.50mmC3, C6
10Resistor_SMD:R_0805_2012MetricR39
18MHzCrystal:Crystal_HC49-4H_VerticalZQ1
1ADCConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_HorizontalJ6
1BOOT/RSTConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_HorizontalJ5
1Conn_01x14Connector_PinSocket_2.54mm:PinSocket_1x14_P2.54mm_HorizontalJ1
1L78L33_SOT89Package_TO_SOT_SMD:SOT-89-3U2
1STM32F103C8TxPackage_QFP:LQFP-48_7x7mm_P0.5mmU1
1SWDConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ3
1UARTConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_HorizontalJ2
1USB_FSuserlib:USB-miniJ4

More from KarakatitsaRISCV/riscv-asm

3
  • 2 layers65 × 40 mmRiscV gt32vf103, the printed circuit board in 3D

    RiscV gt32vf103

    KarakatitsaRISCV/riscv-asm

    41 parts8MIT
  • 2 layers55 × 40 mmCh32v303, the printed circuit board in 3D

    Ch32v303

    KarakatitsaRISCV/riscv-asm

    32 parts8MIT

Similar boards

  • 4 layers68.8 × 90.3 mmHorizon, the printed circuit board in 3D

    Horizon

    Horizon-Avionics/Horizon-H1

    Building a fully open-source flight computer for amateur rocketry!

    173 parts17
  • 4 layers98.7 × 104 mmFlight Controller, the printed circuit board in 3D

    Flight Controller

    ThaoMinhHoang/350_Flight_controller

    ECTE350 storage room for Locus team

    233 parts3
  • 4 layers52.5 × 82.2 mmSTM32F407XX DEV. BOARD, the printed circuit board in 3D

    STM32F407XX DEV. BOARD

    Cosmas-cmd/STM32F407VGTX-DEVELOPMENT-BOARD

    A custom STM32F407VGTx development board designed in KiCad 9.0, featuring the STM32F407 (LQFP100, Cortex-M4F @ 168 MHz) with an external crystal, USB Type-C power input, onboard microSD card and much more...

    62 parts2
  • 2 layers40 × 70 mmKinetiCoreDC, the printed circuit board in 3D

    KinetiCoreDC

    axpaul/KinetiCoreDC

    Compact STM32G0-based DC motor controller board featuring TI DRV8874 H-bridge drivers, RS485 communication, optoisolated I/O, and hardware power protection.

    183 parts1CERN-OHL-S-2.0
  • 4 layers76 × 51.5 mmFlight stick, the printed circuit board in 3D

    Flight stick

    hpvdt/Falcon_flight_stick

    Flight Stick HW and SW files for the Falcon Aircraft

    60 parts1
  • 2 layers80 × 100 mmStm32, the printed circuit board in 3D

    Stm32

    Adamos-khalilos/stm32f407VGTx-dev-board-PCB-

    A custom STM32F407VGTx development board featuring a microSD card slot, SWD debug header, wake-up button, RGB status LEDs, and a clean decoupled power supply. Designed entirely in KiCad.

    61 partsMIT
  • 2 layers81.7 × 61.8 mmBms okmr, the printed circuit board in 3D

    Bms okmr

    AndreCox/OKMR_BMS

    BMS Designed for the Okanagan Marine Robotics Club

    102 parts
  • 6 layers60 × 25 mmServo, the printed circuit board in 3D

    Servo

    brokenpotatoes/Servo

    71 parts

Questions

How big is the Karakatitsa 2 PCB?

It measures 74 × 74 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Karakatitsa 2 use?

80 parts, built around the SMLVN6RGB1U1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Karakatitsa 2 KiCad files?

From the KarakatitsaRISCV/riscv-asm repository on GitHub, at the commit this page was made from: the board is Karakatitsa/Karakatitsa_2/Karakatitsa_2.kicad_pcb and its schematic Karakatitsa/Karakatitsa_1/Karakatitsa_l151.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Karakatitsa 2 design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).