
Horizon
Horizon-Avionics/Horizon-H1
Building a fully open-source flight computer for amateur rocketry!

My version of Mail Notifer by RISO KAGAKU
Leds penguin is an open-source printed circuit board by COKPOWEHEU, from the COKPOWEHEU/MailNotifer_ch32 repository on GitHub, published under the MIT licence. It is a 2-layer board of 40 × 60 mm with 30 parts on 40 nets, routed with 356 tracks and 4 vias.
It is built around the CH32V203G8R6, IRLML0030 and SMLVN6RGB1U1. Its parts include 13 resistors, 5 capacitors, 4 connectors, 3 transistors and 1 IC. It belongs with the lEDs and displays boards and the RISC-V boards of this library.
My version of Mail Notifer by RISO KAGAKU
The device that allows you to indicate something using an RGB LED. Also, unlike the prototype, an LCD screen has been added to display text information. Many features are now configured using files on a virtual "flash drive"
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | R | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R7, R8, R10, R11, R12 |
| 3 | 1.0 | Capacitor_THT:C_Disc_D7.5mm_W2.5mm_P5.00mm | C1, C4, C7 |
| 3 | IRLML0030 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3 |
| 2 | 47.0 | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C2, C3 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R13 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R9 |
| 1 | BRST | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | CH32V203G8 | Package_SO:SSOP-28_3.9x9.9mm_P0.635mm | DD1 |
| 1 | Conn_01x16 | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J4 |
| 1 | L78L33_SOT89 | Package_TO_SOT_SMD:SOT-89-3 | U1 |
| 1 | SMLVN6RGB | LED_SMD:LED_RGB_Cree-PLCC-6_6x5mm_P2.1mm | HL1 |
| 1 | SW_Omron_B3FS | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW1 |
| 1 | Speaker | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | LS1 |
| 1 | UART2 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | USBD | userlib:USB-mini | J3 |

Horizon-Avionics/Horizon-H1
Building a fully open-source flight computer for amateur rocketry!



Cosmas-cmd/STM32F407VGTX-DEVELOPMENT-BOARD
A custom STM32F407VGTx development board designed in KiCad 9.0, featuring the STM32F407 (LQFP100, Cortex-M4F @ 168 MHz) with an external crystal, USB Type-C power input, onboard microSD card and much more...

axpaul/KinetiCoreDC
Compact STM32G0-based DC motor controller board featuring TI DRV8874 H-bridge drivers, RS485 communication, optoisolated I/O, and hardware power protection.


Adamos-khalilos/stm32f407VGTx-dev-board-PCB-
A custom STM32F407VGTx development board featuring a microSD card slot, SWD debug header, wake-up button, RGB status LEDs, and a clean decoupled power supply. Designed entirely in KiCad.

It measures 40 × 60 mm and has 2 copper layers, 1.6 mm thick.
30 parts, built around the CH32V203G8R6, IRLML0030 and SMLVN6RGB1U1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the COKPOWEHEU/MailNotifer_ch32 repository on GitHub, at the commit this page was made from: the board is Hardware/leds_penguin.kicad_pcb and its schematic Hardware/leds_penguin.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).