Skip to the content

Boards using the 74LS05P-E

54 boards

Boards in 40 GitHub repositories, designed in KiCad, that use the 74LS05P-E by Renesas Electronics (- Inverters ROHS). See how each wires it, with its parts, size, README and files; the 74LS05P-E’s symbol, footprint and pinout are on its own page.

  • 2 layers100 × 77.5 mmDiskII, the printed circuit board in 3D

    DiskII

    btb/DiskII

    An Apple Disk II controller clone using standard EPROMs

    35 parts71Apache-2.0
  • 2 layers154.9 × 139.7 mm68kBoard, the printed circuit board in 3D

    68kBoard

    transistorfet/computie

    A collection of 68k computer projects, including a unix-like operating system written in C that runs on them

    78 parts69GPL-3.0
  • 2 layers100 × 77.5 mmSmartDiskII, the printed circuit board in 3D

    SmartDiskII

    btb/SmartDiskII

    An hybrid Disk ][ and SmartPort controller

    42 parts60Apache-2.0
  • 2 layersCompaqportableIII, the printed circuit board in 3D

    CompaqportableIII

    raymondh2/CompaqPortableIII

    Current PCB Memory Expansion board layout is untested. The backplane for the expansion cards is tested and working.

    123 parts17
  • 2 layers98.3 × 107.1 mmCoco9511pak, the printed circuit board in 3D

    Coco9511pak

    barberd/coco9511pak

    This board is a cartridge for the Tandy Radio Shack TRS-80 Color Computer (CoCo), an 8 bit computer produced between 1980 and 1991. It provides an Arithmetic Processor Unit (APU), the AMD 9511, to the CoCo.

    44 parts13GPL-3.0
  • 2 layers283 × 96 mmFront panel 9602, the printed circuit board in 3D

    Front panel 9602

    ibm2030/EDUC8

    EDUC-8 recreation by Gwyllym Suter

    164 parts13
  • 2 layers115 × 57.2 mmTeensyBoardZ80, the printed circuit board in 3D

    TeensyBoardZ80

    mecparts/TeensyBoardZ80

    A Teensy 4.0 emulated Z80 ZCPR3.3/ZSDOS computer.

    42 parts13MIT
  • 2 layers147.3 × 100.3 mmMini68k, the printed circuit board in 3D

    Mini68k

    seventhoctave/mini68k

    mc68008 SBC

    41 parts13
  • 2 layers85.2 × 71.3 mmBootarooni, the printed circuit board in 3D

    Bootarooni

    phooky/bootarooni

    A Raspberry Pi Pico (RP2040) based Apple IIe expansion card with USB isolation.

    34 parts12
  • 2 layers478 × 183 mmHC2000, the printed circuit board in 3D

    HC2000

    badrianiulian/HC2000

    HC2000 Project

    259 parts9
  • 2 layers292.1 × 88 mmRolandMpuImcMod, the printed circuit board in 3D

    RolandMpuImcMod

    schlae/mpu-imc

    MPU-IMC clone board layout and schematic

    123 parts7
  • 2 layers138 × 79 mmPico506, the printed circuit board in 3D

    Pico506

    hmerrett/pico506-pcb

    A dedicated PCB for the Pico506 ST-506/MFM/RLL hard drive emulator: two-layer, 138 × 74 mm, all through-hole, with real card-edge tabs so it plugs into a period ST-506 control/data cable pair the same way an ST-225 does.

    62 parts5GPL-3.0
  • 2 layers400.9 × 280.5 mmAleste520v4, the printed circuit board in 3D

    Aleste520v4

    lucedoriente/Aleste520ex

    Western version of 1993 Z80 russian computer

    345 parts4GPL-3.0
  • 2 layers325 × 209 mmBIT90 26 Prototype, the printed circuit board in 3D

    BIT90 26 Prototype

    BrettHallen/BIT90_26

    An attempted recreation of the 1983 HIT90 computer.

    184 parts3
  • 2 layers31.5 × 53.8 mmXilinx lpt cable, the printed circuit board in 3D

    Xilinx lpt cable

    maniekx86/xilinx_parallel_cable

    Another clone of Xilinx parallel cable

    12 parts3GPL-3.0
  • 2 layers143.3 × 77.5 mmPedisk, the printed circuit board in 3D

    Pedisk

    mnaberez/pedisk2

    Reverse engineering the CGRS Microtech PEDISK II disk system for Commodore PET/CBM computers

    43 parts3
  • 2 layers58.4 × 84.8 mmC64NIKI2, the printed circuit board in 3D

    C64NIKI2

    ibaldachini/C64NIKI2

    This work is licensed under a [Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License][cc-by-nc-sa].

    27 parts2
  • 2 layers113.8 × 82.4 mmTK2000 DiskInterface REDUX, the printed circuit board in 3D

    TK2000 DiskInterface REDUX

    frubem/TK2000_DiskInterface_REDUX

    Forked from https://codeberg.org/hkzlab/TK2000_DiskInterface_REDUX

    42 partsCC-BY-SA-4.0
  • 2 layers195.6 × 35.6 mmMCB-1, the printed circuit board in 3D

    MCB-1

    peon374/MCB-1

    This is a rebuild of the MCB-1 for anybody who has the sound card it connects to.

    34 parts
  • 2 layersHdd card, the printed circuit board in 3D

    Hdd card

    poisk-1/hdd_card

    28 parts
  • 2 layers238.5 × 59.7 mmMm8d, the printed circuit board in 3D

    Mm8d

    pozsarzs/mm8d-hw

    Hardware of MM8D central controlling and remote monitoring device for growing house

    94 parts
  • 2 layersMC68000, the printed circuit board in 3D

    MC68000

    ppsilv/tcpbox68k

    This is my MC68000 first project.

    71 partsGPL-3.0
  • 2 layers100 × 50 mmLogicBoard, the printed circuit board in 3D

    LogicBoard

    RedlabsDE/LogicBoard

    70 parts