Skip to the content
2 layers31.5 × 53.8 mmXilinx lpt cable, the printed circuit board in 3D

Another clone of Xilinx parallel cable

Size
31.5 × 53.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
12
Nets
33
Pads
81
Tracks, vias
171, 2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
14 Dec 2025
Updated
14 Dec 2025

Overview

Xilinx lpt cable is an open-source printed circuit board by maniekx86, from the maniekx86/xilinx_parallel_cable repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 31.5 × 53.8 mm with 12 parts on 33 nets, routed with 171 tracks and 2 vias.

It is built around the 74LS04PC and 74LS05P-E. Its parts include 4 resistors, 4 connectors, 2 capacitors and 2 ICs. It belongs with the fPGA and programmable logic boards of this library.

Main components

2

README

README.md

xilinx_parallel_cable

Another clone of Xilinx parallel cable. The logic is based on what I had in my spare parts at the time of design (7404 + 7405).

Render top

Usage

Connect this device to the PC using a DB-25 cable and provide +5V power to the J4 header, and you're ready to go.

Pinout

J4 (74xx logic power)

PinFunction
1GND
2+5V

J2 & J3 (connected together)

PinFunctionNote
1TMS
2TCK
3GND
4TDO
5TDI
6VrefConnect to target device power

BOM

MarkingValue/ElementPackageAmount
C1100nSMD 08051
C210uRadial D5.0mm P2.50mm1
J1DB-25 female connector1
J2Pin socket 1x6P2.54mm1
J3Pin header 1x6P2.54mm1
J4Pin header 1x2P2.54mm1
R1100SMD 08051
R2-R4470 (330 can be used too)SMD 08053
U17405DIP-141
U27404DIP-141
Render bottom

Prototype

This design was tested on prototype PCB Prototype 1st image Prototype 2nd image

Parts

12
QtyValueFootprintReferences
3470Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR2, R3, R4
1100Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1
1100nCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1
110uCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC2
174LS04Package_DIP:DIP-14_W7.62mmU2
174LS05Package_DIP:DIP-14_W7.62mmU1
1Conn_01x02_PinConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ4
1Conn_01x06_PinConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ3
1Conn_01x06_SocketConnector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_VerticalJ2
1DB25_Socket_MountingHolesConnector_Dsub:DSUB-25_Socket_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset4.94mmJ1

Similar boards

  • 2 layers98.3 × 107.1 mmCoco9511pak, the printed circuit board in 3D

    Coco9511pak

    barberd/coco9511pak

    This board is a cartridge for the Tandy Radio Shack TRS-80 Color Computer (CoCo), an 8 bit computer produced between 1980 and 1991. It provides an Arithmetic Processor Unit (APU), the AMD 9511, to the CoCo.

    44 parts13GPL-3.0
  • 2 layers478 × 183 mmHC2000, the printed circuit board in 3D

    HC2000

    badrianiulian/HC2000

    HC2000 Project

    259 parts9
  • 2 layers292.1 × 88 mmRolandMpuImcMod, the printed circuit board in 3D

    RolandMpuImcMod

    schlae/mpu-imc

    MPU-IMC clone board layout and schematic

    123 parts7
  • 2 layers400.9 × 280.5 mmAleste520v4, the printed circuit board in 3D

    Aleste520v4

    lucedoriente/Aleste520ex

    Western version of 1993 Z80 russian computer

    345 parts4GPL-3.0
  • 2 layers325 × 209 mmBIT90 26 Prototype, the printed circuit board in 3D

    BIT90 26 Prototype

    BrettHallen/BIT90_26

    An attempted recreation of the 1983 HIT90 computer.

    184 parts3
  • 2 layers220 × 160 mm256 word memory, the printed circuit board in 3D

    256 word memory

    ibm2030/EDUC8

    EDUC-8 recreation by Gwyllym Suter

    37 parts13
  • 2 layers254 × 134.6 mmZ80-CPU, the printed circuit board in 3D

    Z80-CPU

    CatspersCoffee/S100-Boards

    S-100 bus boards designed and built: Z80 and 80386 CPU cards, SRAM/DRAM memory, CPLD/FPGA I/O and SPI boards, an 18-slot backplane and bus terminator.

    163 parts
  • 2 layers100 × 77.5 mmDiskII, the printed circuit board in 3D

    DiskII

    btb/DiskII

    An Apple Disk II controller clone using standard EPROMs

    35 parts71Apache-2.0

Questions

How big is the Xilinx lpt cable PCB?

It measures 31.5 × 53.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Xilinx lpt cable use?

12 parts, built around the 74LS04PC and 74LS05P-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Xilinx lpt cable KiCad files?

From the maniekx86/xilinx_parallel_cable repository on GitHub, at the commit this page was made from: the board is xilinx_lpt_cable.kicad_pcb and its schematic xilinx_lpt_cable.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Xilinx lpt cable design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).