

C64NIKI2
This work is licensed under a [Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License][cc-by-nc-sa].
- Size
- 58.4 × 84.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 74
- Pads
- 192
- Tracks, vias
- 536, 32
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 7 Jan 2024
- Updated
- 2 Oct 2024
Overview
C64NIKI2 is an open-source printed circuit board by ibaldachini, from the ibaldachini/C64NIKI2 repository on GitHub. It is a 2-layer board of 58.4 × 84.8 mm with 27 parts on 74 nets, routed with 536 tracks and 32 vias.
It is built around the 74LS125DC, 27C256-17/J and 74LS05P-E, with the 74LS163APC, 74LS174DC and 74LS74PC among its other parts. Its parts include 7 diodes, 6 ICs, 4 capacitors, 4 resistors and 2 switches.
Main components
774LS125DC
-0℃~+70℃ 1 10ns@5.5V,50pF 15mA 18mA 24mA 4 4.5V~5.5V 74LS Power-off isolation、Output enable Tri-State Unidirectional - Buffers, Drivers, Receivers, TransceiversTexas InstrumentsBuffers, Drivers, Receivers, Transceivers27C256-17/J
-0℃~+70℃ 256Kbit 4.5V~5.5V EPROM Parallel Port (Parallel) - Non-Volatile Memory (ROM)Microchip TechnologyNon-Volatile Memory (ROM)74LS05P-E
-- Inverters ROHSRenesas ElectronicsLogic Gates74LS163APC
DIP-164 74LS Programmable divide ratio、Reset function、Cascade counter、Synchronous counting DIP-16 Counters, Dividers ROHSTexas InstrumentsCounters, Dividers74LS174DC
-0ns 0℃~+70℃ 1 16mA 20ns 30MHz 30ns@5V,15pF 4.75V~5.25V 400uA 6 74LS Series 8mA Asynchronous Push-Pull Reset Rising Edge - Flip Flops ROHSonsemiFlip Flops74LS74PC
DIP-140ns 0℃~+70℃ 1 2 20MHz 3.5pF 35ns@5V,50pF 4.5ns 4.75V~5.25V 400uA 74LS Series 8mA 8mA Asynchronous Complementary D-Type Rising Edge Set and Reset DIP-14 Flip FlopsTexas InstrumentsFlip FlopsBC237
TO-92-55℃~+150℃ 1 NPN 150MHz 15nA 350mW 45V 5A 6V 800mV 90 NPN TO-92 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
README
README.mdC64NIKI2 is a project to rebuild Commodore 64 Italian NIKI 2 cartridge.
It has KiCad 7 project with schematic and PCB.
Also there is a SolveSpace 3D project for cartridge case with holes for the two buttons.
Contents
- C64NIKI2.kicad_pro: this is the KiCad 7 project with schematic and PCB
- C64NIKI2.zip: this is a zip file with all needed files to print PCB (all gerber, drill and edge cuts files also present in this repo, but all in one file)
- C64NIKI2-Manuale-Utente.pdf: Italian user manual for NIKI 2 cartridge
- COVER-BOTTOM: bottom part of cartridge case, SolveSpace and stl files
- COVER-TOP: top part of cartridge case, SolveSpace and stl files
- C64NIKI2.csv, C64NIKI2-bom.odt: bom files, first export from KiCad, second is a libreoffice file with bom in leaflet format
- C64NIKIII-etichetta-CARTRIDGE: libreoffice and pdf file with cartidge label to print and paste on cartridge case
- C64-Cart-NoSilkS.kicad_mod: C64 cartidge connector from https://github.com/hackup/64kCart
License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 1N4148 | Diode_THT:D_DO-35_SOD27_P10.16mm_Horizontal | D1, D2, D3, D4, D5, D6, D7 |
| 3 | 2.2K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R4 |
| 2 | 1-2 = 27C - 2-3 = 28C | C64NIKI2:BottomSolderJumper-3_P1.3mm_Bridged2Bar12_Pad1.0x1.5mm_NumberLabels | JP1, JP2 |
| 2 | 100nF | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C1, C4 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 10nF | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C3 |
| 1 | 1nF | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C2 |
| 1 | 27C256 | Package_DIP:DIP-28_W15.24mm | U6 |
| 1 | 74LS05 | Package_DIP:DIP-14_W7.62mm_Socket | U4 |
| 1 | 74LS125 | Package_DIP:DIP-14_W7.62mm_Socket | U3 |
| 1 | 74LS163 | Package_DIP:DIP-16_W7.62mm_Socket | U2 |
| 1 | 74LS174 | Package_DIP:DIP-16_W7.62mm_Socket | U5 |
| 1 | 74LS74 | Package_DIP:DIP-14_W7.62mm_Socket | U1 |
| 1 | BC237 | Package_TO_SOT_THT:TO-92_Wide | Q1 |
| 1 | C64-EXP | C64NIKI2:C64-Cart-NoSilkS | J1 |
| 1 | FREEZE | C64NIKI2:NIKI2-Button | SW1 |
| 1 | RESET | C64NIKI2:NIKI2-Button | SW2 |
Similar boards
- 2 layers244 × 244 mm

- 2 layers301.5 × 367.3 mm

OSI 600D Superboard II Cherry Solder Mask
Bambelweeny57/OSI-600D-SuperBoard-II
KiCad 10 recreation of the Ohio Scientific Superboard II Model 600 rev D (1980) with Cherry MX keyswitches, 27C16/2816 ROMs, full schematic and assembly guide.
314 parts - 2 layers478 × 183 mm

- 4 layers337.6 × 105.7 mm

ISA CGA
hkzlab/CGA_Redux
The Color Graphics Adapter Redux board is a more or less faithful clone of the original IBM CGA, based on the original schematics
170 parts56 - 2 layers100 × 77.5 mm

- 2 layers325 × 209 mm

- 2 layers

CompaqportableIII
raymondh2/CompaqPortableIII
Current PCB Memory Expansion board layout is untested. The backplane for the expansion cards is tested and working.
123 parts17 - 2 layers426 × 307 mm

I7000
felipesanches/Itautec_I7000_KICAD
Esquemáticos do computador Itautec I-7000 G desenhados a partir de inspeção do circuito das PCBs
115 parts
Questions
How big is the C64NIKI2 PCB?
It measures 58.4 × 84.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the C64NIKI2 use?
27 parts, built around the 74LS125DC, 27C256-17/J, 74LS05P-E and 74LS163APC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the C64NIKI2 KiCad files?
From the ibaldachini/C64NIKI2 repository on GitHub, at the commit this page was made from: the board is C64NIKI2.kicad_pcb and its schematic C64NIKI2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the C64NIKI2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask ibaldachini before reusing the design.
