Skip to the content

27C256-17/J

Microchip TechnologyExtended

0℃~+70℃ 256Kbit 4.5V~5.5V EPROM Parallel Port (Parallel) - Non-Volatile Memory (ROM)

Part id
microchip/27C256-17/J
Category
Non Volatile Memory (ROM)
Pins
32
In stock
0 at JLCPCB (C17223064)
Used on
84 open-source boards

Overview

The 27C256-17/J is a non Volatile Memory made by Microchip Technology with 28 pins. 0℃~+70℃ 256Kbit 4.5V~5.5V EPROM Parallel Port (Parallel) - Non-Volatile Memory (ROM).

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:AT27C256R-70TI, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C17223064). 84 open-source boards in 70 repositories on GitHub use it.

Symbol

20CE#1VPP11O012O113O215O316O417O518O619O722OE#14GND27A1426A132A1223A1121A1024A925A83A74A65A56A47A38A29A110A028VCC
EasyEDA_Cloud:AT27C256R-70TIFrom EasyEDA

Footprint

The library has no footprint for this part yet.

Pinout

28
The pins of the 27C256-17/J
PinNameType
1VPPUnspecified
2A12Unspecified
3A7Unspecified
4A6Unspecified
5A5Unspecified
6A4Unspecified
7A3Unspecified
8A2Unspecified
9A1Unspecified
10A0Unspecified
11O0Unspecified
12O1Unspecified
13O2Unspecified
14GNDUnspecified
15O3Unspecified
16O4Unspecified
17O5Unspecified
18O6Unspecified
19O7Unspecified
20CE#Unspecified
21A10Unspecified
22OE#Unspecified
23A11Unspecified
24A9Unspecified
25A8Unspecified
26A13Unspecified
27A14Unspecified
28VCCUnspecified

Open-source boards using it

84See all 84
  • 4 layers184.9 × 243.8 mmProject NuXT, the printed circuit board in 3D

    Project NuXT

    monotech/NuXT

    MicroATX Turbo XT Motherboard, with VGA, Floppy, CF, Serial

    223 parts121GPL-3.0
  • 2 layers104.1 × 87.6 mmIsa svga, the printed circuit board in 3D

    Isa svga

    skiselev/isa-super-vga

    Trident TVGA9000i based Super VGA board

    62 parts81
  • 2 layers237.7 × 146.1 mmTipi peb, the printed circuit board in 3D

    Tipi peb

    jedimatt42/tipi

    TI-99/4A to Raspberry PI messaging through console sideport

    51 parts77
  • 4 layers318.4 × 124.5 mmN2360, the printed circuit board in 3D

    N2360

    jasonsbeer/Amiga-N2630

    A re-imagining of the Amiga A2630 processor card.

    248 parts69
  • 2 layers100 × 77.5 mmSmartDiskII, the printed circuit board in 3D

    SmartDiskII

    btb/SmartDiskII

    An hybrid Disk ][ and SmartPort controller

    42 parts60Apache-2.0
  • 4 layers337.6 × 105.7 mmISA CGA, the printed circuit board in 3D

    ISA CGA

    hkzlab/CGA_Redux

    The Color Graphics Adapter Redux board is a more or less faithful clone of the original IBM CGA, based on the original schematics

    170 parts56
  • 2 layers162.2 × 134.6 mmSg1000, the printed circuit board in 3D

    Sg1000

    barbeque/sg1000

    A homebrew Sega SG-1000, with an eye towards SC-3000 compatibility

    89 parts33
  • 2 layers20.3 × 47.6 mmC64-Kernal Switcher, the printed circuit board in 3D

    C64-Kernal Switcher

    tebl/C64-Kernal-Switcher

    Switchless kernal switcher for the common breadbin Commodore 64, "longboards". Reuses power LED for easier use.

    12 parts33

Questions

Is there a KiCad symbol and footprint for the 27C256-17/J?

Yes. The symbol is EasyEDA_Cloud:AT27C256R-70TI, both drawn on this page. PCBKit places them on a board for you when you design with it.

Where is the 27C256-17/J datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the 27C256-17/J?

JLCPCB lists it as part C17223064, with 0 in stock; the sellers' links on this page open their listings.

Which open-source boards use the 27C256-17/J?

84 boards in 70 repositories on GitHub; the most starred are listed on this page, with their KiCad files.