4 layers50 × 50 mm
HSCanT
cherry-embedded/HSCanT-hardware
HSCanT is a USB to 4-channel CAN FD tool designed based on the HPM5321 chip.
130 parts52Apache-2.0
Boards using the PESD2CAN
32 boardsBoards in 28 GitHub repositories, designed in KiCad, that use the PESD2CAN by Nexperia (-55℃~+150℃ 1nA 2 230W@8/20us 24V 25pF 28V 41V 5A@8/20us Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5 SOT-23 ESD and Surge Protection (TVS/ESD) ROHS). See how each wires it, with its parts, size, README and files; the PESD2CAN’s symbol, footprint and pinout are on its own page.
- 2 layers26 × 13.6 mm
CFDC embedded
ucandevices/CFDC_embedded
Embedded code and PCB for CAN FD to USB converter
36 parts15LGPL-3.0 - 4 layers55 × 35 mm
- 2 layers52 × 109 mm
- 4 layers50 × 50 mm
- 2 layers29 × 26.5 mm
- 4 layers65 × 56 mm
- 2 layers80 × 60 mm
KNX2HovalGateway
Blizzard26/OAM-KNX2HovalGateway
OpenKNX Application to connect KNX Bus to Hoval TopTronic Bus
41 parts1 - 6 layers56.7 × 54.7 mm
Better md80
darshp848/bldc-controller-60v
60 V, 20 A / 80 A peak BLDC motor controller that fits the MD80 v3.0 mounting. KiCad 10, 6 layers.
144 parts1 - 4 layers65 × 56 mm
- 2 layers363.5 × 84 mm
- 2 layers25.8 × 23.7 mm
Canfd breakout
fangyufei/canfd_breakout
Breakout board with CAN-FD (MCP2517/8) controller and CAN-FD (MCP2562FD) transceiver
15 parts - 2 layers61.5 × 28.3 mm
Pcb supermini c3-bmp390
jobes/dronecan-esp32-firmware
Low-cost ESP32-based avionics devices for experimental aviation.
15 parts - 4 layers50 × 50 mm
Iot diagnostic tool
mbabela/secured-vehicle-monitoring
Repository for my bachelor thesis at FEEC BUT
109 parts - 2 layers47 × 41 mm
- 4 layers55 × 32 mm
Canfd mc
Prinsessen/canfd-mc-hardware
CANFD-MC: a 55 x 32 mm, 4-layer CAN board for a motorcycle (KiCad, JLCPCB-ready) - ESP32-S3 + MCP2518FD CAN FD + TCAN332G, 6-40 V load-dump-proof input, ~10 uA standby on the battery.
51 partsMIT - 2 layers83 × 40 mm
- 2 layers103 × 86.5 mm
Input-16--module
sillevl/spha-btni-hardware
SPHA 16-channel input module with microcontroller, input/output circuitry, and CAN connectivity.
112 parts - 4 layers37.6 × 37.6 mm
Niko-4-6-way button
sillevl/spha-btnn-hardware
Revised SPHA Niko-compatible button module hardware.
71 parts - 4 layers29 × 29 mm
Spha BTNU
sillevl/spha-btnu-hardware
Open the .kicadpro file in KiCad. The design includes files originating from an older KiCad workflow; review schematic links, footprints, design rules, zones, and manufacturing outputs after any conversion or upgrade.
57 parts - 4 layers68 × 87 mm
Spha gateway
sillevl/spha-gateway-hardware
Gateway PCB integrating a Raspberry Pi Compute Module 4, CAN circuitry, and power circuitry.
75 parts - 2 layers103 × 86.5 mm
Relay module light
sillevl/spha-rel6-hardware
Open the .kicadpro file in KiCad. The design includes files originating from an older KiCad workflow; review schematic links, footprints, design rules, zones, and manufacturing outputs after any conversion or upgrade.
70 parts - 2 layers207.5 × 86.5 mm
Relay module light
sillevl/spha-rel12-hardware
Open the .kicadpro file in KiCad. The design includes files originating from an older KiCad workflow; review schematic links, footprints, design rules, zones, and manufacturing outputs after any conversion or upgrade.
89 parts - 4 layers80 × 55 mm
