4 layers65 × 30 mm
4 layers50 × 50 mm
HSCanT is a USB to 4-channel CAN FD tool designed based on the HPM5321 chip.
- Size
- 50 × 50 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 130
- Nets
- 89
- Pads
- 433
- Tracks, vias
- 960, 176
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241129)
- Created
- 19 Nov 2024
- Updated
- 4 Mar 2025
Overview
HSCanT is an open-source printed circuit board by cherry-embedded, from the cherry-embedded/HSCanT-hardware repository on GitHub, published under the Apache-2.0 licence. It is a 4-layer board of 50 × 50 mm with 130 parts on 89 nets, routed with 960 tracks and 176 vias.
It is built around the HPM5321IEG1, TLP172G(F) and ME6211C33M5G-N, with the MT9700, WS2812 and ACT45B-510-2P among its other parts. Its parts include 43 capacitors, 23 resistors, 14 diodes, 12 ICs and 6 connectors.
Main components
9
HPM5321IEG1
QFN-48(6x6)QFN-48(6x6) Microcontrollers (MCU/MPU/SOC) ROHSHPMICROMicrocontrollers (MCU/MPU/SOC)
TLP172G(F)
SOP-4-2.54mm1.15V 1.5kV 100us 110mA 25Ω 300us 350V One set normally open: 2A (SPST - normally open) SOP-4-2.54mm Solid State Relays (MOS Output) ROHSToshibaSolid State Relays (MOS Output)
ME6211C33M5G-N
SOT-23-5-40℃~+150℃ 1 120mV@(100mA) 3.3V 500mA 50uVrms 60uA 6V 70dB@(1kHz) Fixed Over Current Protection、Enable、Short Circuit Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMICRONEVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMT9700
SOT-23-5-40℃~+85℃ 1 2.4V~5.5V 2A 80mΩ Active High High Side Switch Short-Circuit Protection(SCP)、Overcurrent Protection(OCP)、Over Temperature Protection SOT-23-5 Power Distribution Switches ROHS西安航天民芯Power Distribution Switches
WS2812
SMD5050-4P1.57mm 1000mcd 110mcd 120us 2kHz 3.7V~5.3V 300ns 320mcd 451nm 523nm 5mm 5mm 623nm 800Kbit/s Built-in power-on reset circuit、Built-in power-on reset circuit Top-mount SMD5050-4P RGB LEDs(Built-in IC) ROHSWorldsemiRGB LEDs(Built-In IC)
ACT45B-510-2P
Common Mode Filters For Automotive Signal Line, TDK ACT SeriesTDKUncategorised
PESD2CAN
SOT-23-55℃~+150℃ 1nA 2 230W@8/20us 24V 25pF 28V 41V 5A@8/20us Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5 SOT-23 ESD and Surge Protection (TVS/ESD) ROHSNexperiaESD And Surge Protection (TVS/ESD)
DSS34
SOD-123FL-50℃~+125℃ 1 Independent 3A 40V 500uA@40V 550mV@3A SOD-123FL Schottky Diodes ROHSBORNSchottky Diodes
TS3425BA
SMD-4P,4.2x3.2mm-20℃~+70℃ 12V 2.5N 2.5mm 3.2mm 30,000 cycles 4.2mm 50mA J-Lead No Oval Button SPST Surface Mount,Vertical White Without Bracket SMD-4P,4.2x3.2mm Tactile Switches ROHSSHOU HANTactile Switches
README
README.mdHSCanT
HSCanT 是一款USB转4路CAN FD工具，基于HPM5321芯片设计。
特性
- 支持4路CAN FD通道
- 每路CAN FD通道支持最高8Mbit/s的数据传输速率
- 支持上位机配置可选的120Ω终端电阻
- 每路通道均支持独立的TX、RX状态全彩LED指示
- 支持最高±58V的过压保护
致谢
感谢RCSN大佬提供的思路，以及该项目的上下位机软件支持。
Parts
130| Qty | Value | Footprint | References |
|---|---|---|---|
| 31 | 0.1u | Capacitor_SMD:C_0402_1005Metric | C11, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C26, C28, C29 +15 |
| 8 | WS2812 | MyLED:LED_WS2812_0807 | D2, D3, D4, D5, D6, D7, D8, D9 |
| 7 | 10k | Resistor_SMD:R_0402_1005Metric | R4, R5, R6, R10, R15, R16, R21 |
| 7 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7 |
| 4 | 100R | Resistor_SMD:R_1206_3216Metric | R8, R11, R13, R18 |
| 4 | 10R | Resistor_SMD:R_0402_1005Metric | R7, R12, R17, R22 |
| 4 | 1k | Resistor_SMD:R_0402_1005Metric | R9, R14, R19, R20 |
| 4 | 2601-1102 | connector:WAGO-2601-1102 | J3, J4, J5, J6 |
| 4 | 2N7002 | Package_DFN_QFN:Diodes_DFN1006-3 | Q1, Q2, Q3, Q4 |
| 4 | ACT45B-510 | Inductor_SMD:L_CommonModeChoke_Coilcraft_1812CAN | FL1, FL2, FL3, FL4 |
| 4 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_Pad_TopBottom | H1, H2, H3, H4 |
| 4 | PESD2CAN | Package_TO_SOT_SMD:SOT-23 | D10, D11, D12, D13 |
| 4 | TCAN1044AVDR-Q1 | Package_DFN_QFN:DFN-8-1EP_3x3mm_P0.65mm_EP1.55x2.4mm | U5, U6, U8, U11 |
| 4 | TLP172 | Package_SO:SOP-4_3.8x4.1mm_P2.54mm | U7, U9, U10, U12 |
| 3 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R2, R23 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric | C3, C6 |
| 2 | 10u | Capacitor_SMD:C_0402_1005Metric | C10, C12 |
| 2 | 15p | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C4, C7 |
| 2 | 22u | Capacitor_SMD:C_0402_1005Metric | C8, C9 |
| 2 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C25, C27 |
| 2 | LOGO | LOGO | G***, G*** |
| 1 | 0524P | Package_SON:USON-10_2.5x1.0mm_P0.5mm | U1 |
| 1 | 24M | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1 |
| 1 | 4.7k | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 4.7uH | Inductor_SMD:L_1008_2520Metric | L1 |
| 1 | CX90M | My USB Connector:USB-C-SMD_CX90M-16P | J2 |
| 1 | DSS34 | Diode_SMD:D_SOD-123 | D1 |
| 1 | G*** | kibuzzard-6738A07D | kibuzzard-6738A07D |
| 1 | G*** | kibuzzard-6738A091 | kibuzzard-6738A091 |
| 1 | G*** | kibuzzard-6738A074 | kibuzzard-6738A074 |
| 1 | G*** | kibuzzard-6738A057 | kibuzzard-6738A057 |
| 1 | HPM5321IEG1 | Package_DFN_QFN:QFN-48-1EP_6x6mm_P0.4mm_EP4.2x4.2mm | U2 |
| 1 | Header 1.27 4P | Connector_PinHeader_1.27mm:PinHeader_1x04_P1.27mm_Vertical | J1 |
| 1 | LED_G | LED_SMD:LED_0603_1608Metric | D14 |
| 1 | ME6211C33M5 | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | MT9700 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | TS3425 | Button_Switch_SMD:SW_SPST_PTS810 | SW1 |
Questions
How big is the HSCanT PCB?
It measures 50 × 50 mm and has 4 copper layers, 1.6 mm thick.
What parts does the HSCanT use?
130 parts, built around the HPM5321IEG1, TLP172G(F), ME6211C33M5G-N and MT9700. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the HSCanT KiCad files?
From the cherry-embedded/HSCanT-hardware repository on GitHub, at the commit this page was made from: the board is HSCanT.kicad_pcb and its schematic HSCanT.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the HSCanT design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers68.6 × 53.3 mm
- 4 layers82 × 62 mm
Telematics tracker
Immanueldavidckp/schematics
CAN-connected GPS/LTE tracker for rental MEWPs (boom/scissor lifts). Powered from machine batteries with internal Li-ion backup, 2 isolated digital inputs, 2 low-side outputs, ignition sense, 6-axis IMU, and ≥6 days of…
216 parts - 2 layers176.9 × 104 mm
ESP32-P4 Display 7.0 inch V1.0
hellosamblack/CrowPanelProp
Cassette-futurism communicator/scanner prop for the CrowPanel Advance ESP32-P4 (hardware V1.0). Custom ESP-IDF firmware structured as a generic prop engine: stable firmware whose behavior is driven live over WiFi, so…
544 parts - 2 layers92 × 92 mm
- 2 layers42 × 50 mm
- 4 layers45 × 75 mm
- 2 layers43 × 43 mm
