4 layers26 × 35 mm
4 layers65 × 30 mm
HSDevKit5301
HalfSweet/HSDevKit53013基于HPM5301芯片的开发板
- Size
- 65 × 30 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 151
- Nets
- 126
- Pads
- 578
- Tracks, vias
- 1,502, 243
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 16 Sep 2024
- Updated
- 21 Sep 2024
Overview
HSDevKit5301 is an open-source printed circuit board by HalfSweet, from the HalfSweet/HSDevKit5301 repository on GitHub, published under the MIT licence. It is a 4-layer board of 65 × 30 mm with 151 parts on 126 nets, routed with 1,502 tracks and 243 vias.
It is built around the HPM5301IEG1, RT8010GQW and W25Q32JVSSIQ, with the TS3425BA, 1TS028A-1900-0600-CT and AO3401A among its other parts. Its parts include 60 capacitors, 55 resistors, 9 ICs, 6 connectors and 5 diodes.
Main components
9
HPM5301IEG1
QFN-48(6x6)-40℃~+105℃ 16bit 1MB 288KB 29 32 Bit 360MHz 3V~3.6V Built-in+External FLASH Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、Software reset、External pin reset (NRST)、Built-in general-purpose timer、Integrated LDO、True random number generator (TRNG)、Storage encryption RISC-V QFN-48(6x6) Microcontrollers (MCU/MPU/SOC) ROHSHPMICROMicrocontrollers (MCU/MPU/SOC)
RT8010GQW
WDFN-6-EP(2x2)-40℃~+125℃ 1 1.5MHz 1A 2.5V~5.5V 50uA 600mV~5.3V Adjustable Buck Buck Built-in Yes WDFN-6-EP(2x2) DC-DC Converters ROHSRichtek TechDC-DC Converters
W25Q32JVSSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 133MHz 1uA 2.7V~3.6V 20 Years 32Mbit 3ms SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
TS3425BA
SMD-4P,4.2x3.2mm-20℃~+70℃ 12V 2.5N 2.5mm 3.2mm 30,000 cycles 4.2mm 50mA J-Lead No Oval Button SPST Surface Mount,Vertical White Without Bracket SMD-4P,4.2x3.2mm Tactile Switches ROHSSHOU HANTactile Switches
1TS028A-1900-0600-CT
SMD-4P,2.8x1.9mm-40℃~+90℃ 0.6mm 1.9N 1.9mm 12V 2.8mm 300,000 Cycles 50mA Black IP68 No Round Button SMD(SMT) Tab SPST Surface Mount,Vertical Without Bracket SMD-4P,2.8x1.9mm Tactile Switches ROHSHYPTactile Switches
AO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
DSS34
SOD-123FL-50℃~+125℃ 1 Independent 3A 40V 500uA@40V 550mV@3A SOD-123FL Schottky Diodes ROHSBORNSchottky Diodes
FH34SRJ-8S-0.5SH(50)
SMD,P=0.5mm,卧贴-55℃~+105℃ 0.3mm 0.5mm 1mm 8P Double-Sided Contacts, Top and Bottom Entry Gold Phosphor bronze Surface Mount, Right Angle SMD,P=0.5mm,卧贴 FFC, FPC (Flat Flexible) Connector Assemblies ROHSHirose ElectricFFC, FPC (Flat Flexible) Connector Assemblies
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
README
README.mdHSDevKit5301
Parts
151| Qty | Value | Footprint | References |
|---|---|---|---|
| 38 | 0.1u | Capacitor_SMD:C_0402_1005Metric | C3, C11, C13, C18, C19, C20, C21, C22, C23, C24, C25, C26, C27, C28, C33, C34 +22 |
| 23 | 0R | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4, R17, R22, R40, R41, R42, R43, R44, R45, R46, R47, R48, R49 +7 |
| 9 | 10k | Resistor_SMD:R_0402_1005Metric | R10, R11, R12, R30, R31, R32, R35, R53, R54 |
| 8 | 10u | Capacitor_SMD:C_0402_1005Metric | C5, C6, C12, C17, C29, C30, C37, C42 |
| 7 | 100k | Resistor_SMD:R_0402_1005Metric | R7, R16, R18, R19, R20, R26, R34 |
| 5 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C10, C14, C32, C35, C39 |
| 4 | 15p | Capacitor_SMD:C_0402_1005Metric | C1, C2, C55, C56 |
| 4 | 22u | Capacitor_SMD:C_0402_1005Metric | C15, C16, C40, C41 |
| 4 | 47k | Resistor_SMD:R_0402_1005Metric | R36, R37, R38, R39 |
| 4 | MountingHole_2.7mm_M2.5 | MountingHole:MountingHole_2.7mm_M2.5 | MH1, MH2, MH3, MH4 |
| 3 | 22R | Resistor_SMD:R_0402_1005Metric | R6, R28, R29 |
| 3 | 2N7002 | Package_TO_SOT_SMD:SOT-323_SC-70 | Q1, Q2, Q3 |
| 2 | 0524P | Package_SON:USON-10_2.5x1.0mm_P0.5mm | U3, U4 |
| 2 | 24M | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1, Y2 |
| 2 | 4.7uH | Inductor_SMD:L_1008_2520Metric | L1, L3 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R13, R14 |
| 2 | 68k | Resistor_SMD:R_0402_1005Metric | R15, R21 |
| 2 | 900k | Resistor_SMD:R_0402_1005Metric | R24, R25 |
| 2 | HPM5301IEG1 | Package_DFN_QFN:QFN-48-1EP_6x6mm_P0.4mm_EP4.2x4.2mm | U1, U8 |
| 2 | TPS25200 | Package_DFN_QFN:DFN-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U2, U5 |
| 2 | TS3425 | Button_Switch_SMD:SW_SPST_PTS810 | SW1, SW2 |
| 2 | USB_C_Receptacle_USB2.0 | My USB Connector:USB-C-SMD_CX90M-16P | J1, J2 |
| 1 | 10R | Resistor_SMD:R_0603_1608Metric | R33 |
| 1 | 1TS028A-1900-0600-CT | My Switch:SW-SMD_4P-L2.8-W1.9-P1.20-LS3.0_1TS028A | SW3 |
| 1 | 2.2u | Inductor_SMD:L_1008_2520Metric | L2 |
| 1 | 22.1k | Resistor_SMD:R_0402_1005Metric | R27 |
| 1 | 22p | Capacitor_SMD:C_0402_1005Metric | C31 |
| 1 | 886k | Resistor_SMD:R_0402_1005Metric | R23 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q4 |
| 1 | DSS34 | Diode_SMD:D_SOD-123 | D1 |
| 1 | FH34SRJ-8S-0.5SH | connector:FPC-SMD_8P-P0.50-FH34SRJ | J4 |
| 1 | HUSB320 | Package_DFN_QFN:Texas_X2QFN-12_1.6x1.6mm_P0.4mm | U6 |
| 1 | Header 2.54 2x20 | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J3 |
| 1 | Header 2.54 4P | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | LED_G | LED_SMD:LED_0402_1005Metric | D5 |
| 1 | LED_R | LED_SMD:LED_0402_1005Metric | D4 |
| 1 | Micro_SD_Card_Det1 | connector:TF-SMD_TF-06A | J5 |
| 1 | RB520 | Diode_SMD:D_SOD-523 | D2 |
| 1 | RT8010 | Package_DFN_QFN:DFN-6-1EP_2x2mm_P0.65mm_EP1.01x1.7mm | U7 |
| 1 | W25Q32JVSS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U9 |
| 1 | WS2812B | MyLED:LED_WS2812_0807 | D3 |
Questions
How big is the HSDevKit5301 PCB?
It measures 65 × 30 mm and has 4 copper layers, 1.6 mm thick.
What parts does the HSDevKit5301 use?
151 parts, built around the HPM5301IEG1, RT8010GQW, W25Q32JVSSIQ and TS3425BA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the HSDevKit5301 KiCad files?
From the HalfSweet/HSDevKit5301 repository on GitHub, at the commit this page was made from: the board is HSDevKit5301.kicad_pcb and its schematic Debugger.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the HSDevKit5301 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers50 × 50 mm
HSCanT
cherry-embedded/HSCanT-hardware
HSCanT is a USB to 4-channel CAN FD tool designed based on the HPM5321 chip.
130 parts52Apache-2.0 - 2 layers45 × 45 mm
- 4 layers25 × 12.5 mm
- 2 layers
- 2 layers100 × 100 mm
Tracker Charger V1
myles-parfeniuk/SilhouetteSync
Open source motion tracker band intended for athletics analytics.
146 partsGPL-3.0 - 2 layers92 × 92 mm
- 2 layers42 × 50 mm
