4 layers25 × 12.5 mm
2 layers
PYLinkBase Hardware
HalfSweet/PYLinkBase-Hardware- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 59
- Nets
- 66
- Pads
- 264
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 26 Jul 2024
- Updated
- 26 Jul 2024
Overview
PYLinkBase Hardware is an open-source printed circuit board by HalfSweet, from the HalfSweet/PYLinkBase-Hardware repository on GitHub. It is a 2-layer board with 59 parts on 66 nets.
It is built around the PY32F030L14D6TR, TTP233H-RB6 and RT8010GQW, with the RS2227XUTQK10, ESD0524P and HSCB20D03 among its other parts. Its parts include 21 capacitors, 16 resistors, 10 ICs, 4 diodes and 2 transistors.
Main components
7PY32F030L14D6TR
DFN-8-EP(1.5x1.5)DFN-8-EP(1.5x1.5) Microcontrollers (MCU/MPU/SOC) ROHSPUYAMicrocontrollers (MCU/MPU/SOC)
TTP233H-RB6
DFN-6(2x2)-40℃~+85℃ 1.5uA 2.4V~5.5V 4kV 8uA Yes DFN-6(2x2) Touch Sensors ROHSTontek Design TechTouch Sensors
RT8010GQW
WDFN-6-EP(2x2)-40℃~+125℃ 1 1.5MHz 1A 2.5V~5.5V 50uA 600mV~5.3V Adjustable Buck Buck Built-in Yes WDFN-6-EP(2x2) DC-DC Converters ROHSRichtek TechDC-DC Converters
RS2227XUTQK10
WQFN-10(1.4x1.8)-40℃~+85℃ 1.8V~5.5V 15ns 20ns 2:1 350ps 550MHz 6Ω 7pF WQFN-10(1.4x1.8) Analog Switches, Multiplexers ROHSJiangsu RUNIC TechAnalog Switches, Multiplexers
ESD0524P
DFN2510-10-55℃~+125℃ 10V 1A 1uA 5V 60W 9V ESD DFN2510-10 ESD and Surge Protection (TVS/ESD) ROHSMDDESD And Surge Protection (TVS/ESD)
HSCB20D03
DFN-6-EP(2x2)-55℃~+150℃ 1.2V 1.5W 100mΩ@4.5V 2 P-Channel 20V 3.3nC@10V 331pF 37pF 3A 64pF P-Channel DFN-6-EP(2x2) MOSFETs ROHSHUASHUOMOSFETs
WS2812
SMD5050-4P1.57mm 1000mcd 110mcd 120us 2kHz 3.7V~5.3V 300ns 320mcd 451nm 523nm 5mm 5mm 623nm 800Kbit/s Built-in power-on reset circuit、Built-in power-on reset circuit Top-mount SMD5050-4P RGB LEDs(Built-in IC) ROHSWorldsemiRGB LEDs(Built-In IC)
README
README.mdPYLinkBase-Hardware
Parts
59| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 0.1u | Capacitor_SMD:C_0402_1005Metric | C3, C4, C5, C6, C7, C10, C14, C17, C18, C19, C20, C21 |
| 6 | 22R | Resistor_SMD:R_0402_1005Metric | R8, R9, R10, R11, R12, R13 |
| 4 | 10u | Capacitor_SMD:C_0402_1005Metric | C8, C11, C12, C15 |
| 3 | 100k | Resistor_SMD:R_0402_1005Metric | R6, R15, R16 |
| 3 | 50p | Capacitor_SMD:C_0402_1005Metric | C1, C2, C16 |
| 3 | TTP233H-RB6 | Package_DFN_QFN:DFN-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U1, U2, U9 |
| 3 | TouchPad | Touch Pad:Touch_SMD_BOX | TP1, TP2, TP3 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | 68k | Resistor_SMD:R_0402_1005Metric | R5, R14 |
| 2 | HSCB20D03 | My DFN_QFN:DFN-6_L2.0-W2.0-P0.65-BL-EP2 | Q1, Q2 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D1, D2 |
| 2 | RS2227XUTQK10 | My DFN_QFN:WQFN-10_L1.8-W1.4-P0.40-BL | U4, U5 |
| 2 | WS2812 | MyLED:LED-SMD_4P-L1.0-W1.0-TL_XL-1010RGBC-WS2812B | D3, D4 |
| 1 | 2.2u | Inductor_SMD:L_1008_2520Metric | L1 |
| 1 | 22.1k | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 22p | Capacitor_SMD:C_0402_1005Metric | C13 |
| 1 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C9 |
| 1 | ESD0524P | ESD-TVS:DFN-10_L2.5-W1.0-P0.50-BL-A | U3 |
| 1 | Header | connector:Conn_02x05_PinHeader_SMD | J2 |
| 1 | PY32F030L14D6 | Package_DFN_QFN:DFN-8-1EP_1.5x1.5mm_P0.4mm_EP0.7x1.2mm | U10 |
| 1 | PY32F071K18U6 | Package_DFN_QFN:VQFN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm | U8 |
| 1 | RT8010 | Package_DFN_QFN:DFN-6-1EP_2x2mm_P0.65mm_EP1.01x1.7mm | U7 |
| 1 | TPS25200 | Package_DFN_QFN:DFN-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U6 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
Questions
What parts does the PYLinkBase Hardware use?
59 parts, built around the PY32F030L14D6TR, TTP233H-RB6, RT8010GQW and RS2227XUTQK10. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PYLinkBase Hardware KiCad files?
From the HalfSweet/PYLinkBase-Hardware repository on GitHub, at the commit this page was made from: the board is PYLinkBase-Hardware.kicad_pcb and its schematic PYLinkBase-Hardware.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PYLinkBase Hardware design in my own project?
Its repository states no licence, so its author keeps all rights: ask HalfSweet before reusing the design.
Similar boards
- 2 layers87.4 × 20.3 mm
UINIO MCU ESP32S3
uinika/UINIO-MCU-ESP32S3
the Evaluation Board base on ESP32-S3 with Xtensa® Dual-Core 32-bit LX7.
48 parts13 - 4 layers44 × 44 mm
- 2 layers45 × 28 mm
PiVideoCapturer
Sasasu/PiVideoCapturer
A video capturer using TC358840XBG and arm SoC
44 parts30GPL-3.0 - 4 layers65 × 30 mm
- 2 layers100 × 100 mm
Tracker Charger V1
myles-parfeniuk/SilhouetteSync
Open source motion tracker band intended for athletics analytics.
146 partsGPL-3.0 - 2 layers308.8 × 130.3 mm
CyberKeeb2040
zli117/CyberKeeb2040
Hardware design for a mechanical keyboard based on RP2040 that also has a Pi Zero onboard.
182 parts98CC-BY-SA-4.0 - 2 layers99.1 × 99.1 mm
TangNanoDCJ11MEM
ryomuk/TangNanoDCJ11MEM
Memory system and UART implemented on Tang Nano 20K for DEC DCJ11 PDP-11 Processor
45 parts86MIT