4 layers76.2 × 82.6 mm
4 layers80 × 55 mm
Automoto
sorcnr/automotoa copy of openremote
- Size
- 80 × 55 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 62
- Nets
- 65
- Pads
- 397
- Tracks, vias
- 880, 195
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 22 Jun 2022
- Updated
- 26 Oct 2026
Overview
Automoto is an open-source printed circuit board by sorcnr, from the sorcnr/automoto repository on GitHub. It is a 4-layer board of 80 × 55 mm with 62 parts on 65 nets, routed with 880 tracks and 195 vias.
It is built around the ESP32-S3-WROOM-1U-N4, SN65HVD230D and AP2112K-3.3, with the BTS7002-1EPP, CN3058E and LIS3DH among its other parts. Its parts include 20 resistors, 12 ICs, 8 capacitors, 6 diodes and 4 connectors. It belongs with the ESP32 boards of this library.
Main components
12
ESP32-S3-WROOM-1U-N4
SMD,19.2x18mm-103.5dBm -40℃~+85℃ 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 UART、SPI、I2C、I2S、USB SMD,19.2x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
SN65HVD230D
SOIC-8-40℃~+85℃ 1 17mA 1Mbps 370uA 3V~3.6V CAN Transceiver Low-power mode、Wake-up function、ESD protection、Thermal shutdown protection、Bus fault protection、Hot-swap protection SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN Transceivers
AP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorisedBTS7002-1EPP
TSDSO-14TSDSO-14 Power Distribution Switches ROHSInfineon TechnologiesPower Distribution Switches
CN3058E
SOP-8-EP-40℃~+85℃ 1 1A 3.6V 3.8V~6V 3uA LiFePO4 Battery Support 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、欠压锁定 SOP-8-EP Battery Management ROHSShangHai Consonance ElecBattery Management
LIS3DH
LGA-16(3x3)-40℃~+85℃ 1.71V~3.6V 16bit 500nA Accelerometer Motion event detection SPI、I2C X,Y,Z ±16g LGA-16(3x3) Accelerometers ROHSSTMicroelectronicsAccelerometers
LM66100DCK
SC-70-6-40℃~+125℃ 1 1.5A 1.5V~5.5V 150nA 95mΩ Integrated FET Reverse current blocking、Reverse polarity protection、With enable SC-70-6 ORing Controllers ROHSTexas InstrumentsPower Distribution Switches
LTV-356T
SOP-4-2.54mm-55℃~+110℃ 1 1.2V 200mV@1mA,20mA 3.75kV 3us 4us@2mA,100Ω 50% 50mA 50mA 600% 6V 80V DC Phototransistor SOP-4-2.54mm Transistor, Photovoltaic Output Optoisolators ROHSLite-OnTransistor, Photovoltaic Output Optoisolators
TPS54302
UncategorisedTexas Instruments
DMN6075S
SOT-23-55℃~+150℃ 1 N-channel 125mΩ@4.5V 19.5pF 247pF 350mW 3A 500mV 60V SOT-23 MOSFETs ROHSTECH PUBLICMOSFETsPESD2CAN
SOT-23-55℃~+150℃ 1nA 2 230W@8/20us 24V 25pF 28V 41V 5A@8/20us Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5 SOT-23 ESD and Surge Protection (TVS/ESD) ROHSNexperiaESD And Surge Protection (TVS/ESD)
TPSMC36A-VR
DO-214AB(SMCJ)-65℃~+150℃ 1.5kW 1uA 25.9A 36V 40V 58.1V IEC 61000-4-2、IEC 61000-4-4 TVS Unidirectional DO-214AB(SMCJ) ESD and Surge Protection (TVS/ESD) ROHSLittelfuseESD And Surge Protection (TVS/ESD)
README
README.mdAutoMoto — Akıllı Motosiklet Telemetri, Güvenlik ve Keyless Go Sistemi
AutoMoto; ESP32-S3 mimarisi, SIMCom SIM808 GSM/GPRS + GPS hücresel modülü, BLE 5.0 yakınlık algılaması (Keyless Go) ve otomotiv sınıfı katı-hal (PROFET / SSR) anahtarlama teknolojisine dayanan yeni nesil bir akıllı motosiklet telemetri ve güvenlik platformudur.
Proje ve Tasarım Dokümantasyonu
- Proje Genel Tanımı ve Sistem Mimarisi: PROJECT.md [blocked]
- PCB & Şematik Teknik İmalat Şartnamesi (v4.0): hardware/pcb/PCB_SPECIFICATION.md [blocked]
Donanım ve CAD Dosyaları (hardware/pcb/)
- KiCad 10 Elektrik Şematik: hardware/pcb/automoto.kicad_sch [blocked]
- KiCad 10 4-Katmanlı PCB: hardware/pcb/automoto.kicad_pcb [blocked]
- Özel Sembol Kütüphanesi: hardware/pcb/automoto.kicad_sym [blocked]
- Şematik ve PCB Üreteç Betikleri:
- hardware/pcb/generate_kicad_sch.py [blocked]
- hardware/pcb/generate_kicad_pcb.py [blocked]
- Doğrulama Raporları:
- hardware/pcb/erc_report.rpt [blocked] (ERC: 0 Violations)
- hardware/pcb/drc_report.rpt [blocked] (DRC: 0 Violations, 0 Unconnected Pads)
Görsel Çıktılar
- Şematik Çizimi: hardware/pcb/drawings/automoto_schematic.png [blocked] | PDF [blocked]
- 2D PCB Yerleşimi: hardware/pcb/drawings/automoto_pcb.png [blocked] | SVG [blocked]
- 3D Raytracing Renderları:
- hardware/pcb/renders/kicad_3d_isometric.png [blocked]
- hardware/pcb/renders/kicad_3d_top.png [blocked]
- hardware/pcb/renders/kicad_3d_bottom.png [blocked]
Parts
62| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 330R | R_0603_1608Metric | R5, R6, R7, R11, R12 |
| 4 | 10k | R_0603_1608Metric | R2, R4, R14, R16 |
| 4 | M2.5_Hole | MountingHole_2.7mm_M2.5_Pad_Via | H1, H2, H3, H4 |
| 3 | 100k | R_0603_1608Metric | R15, R17, R18 |
| 3 | 100nF | C_0603_1608Metric | C5, C7, C8 |
| 3 | 4.7k | R_0603_1608Metric | R13, R19, R20 |
| 2 | 5.1k | R_0603_1608Metric | R8, R9 |
| 1 | 1.2k | R_0603_1608Metric | R10 |
| 1 | 100uF_Tantal | CP_EIA-7343-31_Kemet-D | C4 |
| 1 | 10uF | C_0603_1608Metric | C6 |
| 1 | 1812L200PR | Fuse_1812_4532Metric | F1 |
| 1 | 2.4k | R_0603_1608Metric | R3 |
| 1 | 22uF_25V | C_1210_3225Metric | C1 |
| 1 | 22uF_50V | C_1210_3225Metric | C2 |
| 1 | 47uF_10V | C_1210_3225Metric | C3 |
| 1 | 54.9k | R_0603_1608Metric | R1 |
| 1 | 6.8uH | L_Vishay_IHLP-2020 | L1 |
| 1 | AP2112K-3.3 | SOT-23-5 | U7 |
| 1 | BLUE_BLE | LED_0603_1608Metric | LED2 |
| 1 | BOOT | SW_Push_1P1T_NO_CK_KMR2 | SW2 |
| 1 | BTS7002-1EPP | Infineon_PG-TSDSO-14-22 | U10 |
| 1 | CN3058 | SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | DMN6075S | SOT-23 | Q5 |
| 1 | ESP32-S3-WROOM-1U | ESP32-S3-WROOM-1U | U1 |
| 1 | GPS_UFL | U.FL_Hirose_U.FL-R-SMT-1_Vertical | ANT2 |
| 1 | GREEN_GSM | LED_0603_1608Metric | LED3 |
| 1 | GSM_UFL | U.FL_Hirose_U.FL-R-SMT-1_Vertical | ANT1 |
| 1 | JST_LiFePO4 | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J3 |
| 1 | LIS3DH | LGA-16_3x3mm_P0.5mm | U3 |
| 1 | LM66100 | SOT-23-6 | U6 |
| 1 | LTV-356T | SO-4_4.4x4.3mm_P2.54mm | U9 |
| 1 | Molex_14P | Molex_Micro-Fit_3.0_43045-1400_2x07_P3.00mm_Horizontal | J1 |
| 1 | Nano_SIM | nanoSIM_Hinged_CUI_NSIM-2-C | J2 |
| 1 | PESD2CAN | SOT-23 | D2 |
| 1 | RED_ALARM | LED_0603_1608Metric | LED1 |
| 1 | RESET | SW_Push_1P1T_NO_CK_KMR2 | SW1 |
| 1 | SIMCom_SIM808 | SIMCom_SIM900 | U2 |
| 1 | SN65HVD230 | SOIC-8_3.9x4.9mm_P1.27mm | U8 |
| 1 | SQJ411EP | PowerPAK_SO-8_Single | Q1 |
| 1 | TPS54302 | SOT-23-6 | U4 |
| 1 | TPSMC36A | D_SMC | D1 |
| 1 | USBLC6 | SOT-23-6 | D3 |
| 1 | USB_C | USB_C_Receptacle_GCT_USB4110 | J4 |
| 1 | VO14642_Kill | SO-4_4.4x4.3mm_P2.54mm | U12 |
| 1 | VO14642_Start | SO-4_4.4x4.3mm_P2.54mm | U11 |
Questions
How big is the Automoto PCB?
It measures 80 × 55 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Automoto use?
62 parts, built around the ESP32-S3-WROOM-1U-N4, SN65HVD230D, AP2112K-3.3 and BTS7002-1EPP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Automoto KiCad files?
From the sorcnr/automoto repository on GitHub, at the commit this page was made from: the board is hardware/pcb/automoto.kicad_pcb and its schematic hardware/pcb/automoto.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Automoto design in my own project?
Its repository states no licence, so its author keeps all rights: ask sorcnr before reusing the design.
Similar boards
- 4 layers210 × 100 mm
Rear distribution
york-fs/rear-distribution
The rear distribution board is the central board of the LVS. It provides fusing for all other LVS components and interfaces with the front, TSAC, and TS box distribution boards, as well as the inverter via AMPSEAL…
134 parts - 4 layers74 × 53 mm
- 4 layers56 × 38 mm
LaserOps PCB
nico25112005/Nerf-ATG-Electronics
This repository contains the electronic design files for a custom printed circuit board (PCB) developed to enhance Nerf LaserOps blasters.
103 parts1 - 2 layers22.9 × 50.8 mm
Esp32-lifepo4
pho/esp32-lifepo4-board
Kicad pcb design of a minimal board with an ESP32 and a LiFePo4 charging circuit
14 parts12 - 4 layers90 × 95 mm
Wiegand bridge
EdgeCoil/wiegand-bridge
ESP32-S3 Wiegand reader bridge for Home Assistant: 4-layer board, BOM and ESPHome firmware.
197 parts1 - 2 layers203 × 68.5 mm
- 2 layers66.9 × 110 mm
Kitchen clock
chof747/kitchen-clock
This project is building a kitchen glock with the following functions:
74 parts