Skip to the content
4 layers56 × 38 mmLaserOps PCB, the printed circuit board in 3D

This repository contains the electronic design files for a custom printed circuit board (PCB) developed to enhance Nerf LaserOps blasters.

Size
56 × 38 mm
Copper layers
4
Thickness
1.6 mm
Parts
103
Nets
84
Pads
361
Tracks, vias
870, 88
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
14 Jun 2024
Updated
17 Jul 2026

Overview

LaserOps PCB is an open-source printed circuit board by nico25112005, from the nico25112005/Nerf-ATG-Electronics repository on GitHub. It is a 4-layer board of 56 × 38 mm with 103 parts on 84 nets, routed with 870 tracks and 88 vias.

It is built around the ESP32-S3-WROOM-1-N8, LMV321IDBVR and AMS1117, with the LIS3DH, TPS54302 and 1N4002W among its other parts. Its parts include 30 capacitors, 26 resistors, 9 ICs, 8 connectors and 5 switches. It belongs with the ESP32 boards of this library.

Main components

9

README

README.md

Nerf-ATG-Electronics

This repository contains the electronic design files for a custom printed circuit board (PCB) developed to enhance Nerf LaserOps blasters. The board utilizes an ESP32-S3 microcontroller to manage the blaster's functions and communicate via Bluetooth with a Unity application.

Features

  • Custom PCB design for Nerf LaserOps blasters
  • ESP32-S3 microcontroller for improved performance and connectivity
  • Bluetooth Classic for communication with a Unity application

Installation

  1. PCB Assembly:

    • Solder the components onto the board as per the schematic and Bill of Materials (BOM).
  2. Firmware Flashing:

    • Flash the firmware onto the ESP32-S3. The firmware can be found in the Nerf-ATG-Firmware repository.
  3. Integration:

    • Replace the original mainboard in the Nerf LaserOps blaster with the custom PCB.
  4. Unity App Setup:

    • Install the Unity app from the Nerf-ATG-App repository on your device.
    • Pair the blaster with the app via Bluetooth.

Usage

  1. Power On:

    • Turn on the blaster.
  2. Connect to App:

    • Open the Unity app and connect to the blaster via Bluetooth.
  3. Operation:

    • Use the app to control and monitor the blaster’s functions.

Contributing

Contributions are welcome! We are currently seeking assistance with programming the ESP32. If you have experience with ESP32 development, please consider contributing to the Nerf-ATG-Firmware repository. Please fork the repository and submit a pull request with your changes.

Contact

For questions or support, please contact nico25112005.

Parts

103
QtyValueFootprintReferences
7100nFPCM_JLCPCB:C_0805C2, C3, C10, C11, C28, C31, C33
610uFPCM_JLCPCB:C_0805C9, C13, C17, C29, C30, C32
522uFPCM_JLCPCB:C_0805C7, C12, C14, C15, C16
4100kΩPCM_JLCPCB:R_0805R4, R16, R19, R22
3JumperJumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm_NumberLabelsJP6, JP7, JP8
20ΩPCM_JLCPCB:R_0805R27, R28
2100ΩPCM_JLCPCB:R_0805R9, R20
210kΩPCM_JLCPCB:R_0805R12, R18
210uFPCM_JLCPCB:C_CASE-A-3216-18(mm)C1, C5
210uFPCM_JLCPCB:C_1206C19, C24
21N4002WPCM_JLCPCB:D_SOD-123FLD1, D2
21uFPCM_JLCPCB:C_0805C6, C8
23.3kΩPCM_JLCPCB:R_0805R23, R24
24.7kΩPCM_JLCPCB:R_0805R25, R26
25.1kΩPCM_JLCPCB:R_0805R1, R11
2LMV321IDBVRPCM_JLCPCB:SOT-23-5_L3.0-W1.7-P0.95-LS2.8-BRU7, U8
2S9014PCM_JLCPCB:Q_SOT-23Q8, Q9
2SW_PushButton_Switch_SMD:SW_SPST_CK_RS282G05A3SW4, SW6
11.5kΩPCM_JLCPCB:R_0805R7
1100nFPCM_JLCPCB:C_1206C22
1100uFPCM_JLCPCB:C_1206C26
1100µFCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC20
110ΩPCM_JLCPCB:R_0805R6
1150kΩPCM_JLCPCB:R_0805R21
11Ω 1WResistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolderR3
11Ω 2WResistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolderR10
12.2kΩPCM_JLCPCB:R_0805R5
122kΩPCM_JLCPCB:R_0805R17
122pFPCM_JLCPCB:C_0805C27
122uFPCM_JLCPCB:C_1206C18
13.3VTestPoint:TestPoint_Pad_D2.0mmTP1
1300kΩPCM_JLCPCB:R_0805R2
147pFPCM_JLCPCB:C_0805C4
16.8µHInductor_SMD:L_Coilcraft_LPS4018L1
1634kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR15
1750ΩPCM_JLCPCB:R_0805R8
1AMS1117PCM_JLCPCB:SOT-223-3_L6.5-W3.4-P2.30-LS7.0-BRU1
1Conn_01x02_SocketConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ2
1Conn_01x07Connector_JST:JST_PH_S7B-PH-SM4-TB_1x07-1MP_P2.00mm_HorizontalJ8
1DomeConnector_JST:JST_PH_B6B-PH-SM4-TB_1x06-1MP_P2.00mm_VerticalJ3
1ESP32-S3-WROOM-1RF_Module:ESP32-S3-WROOM-1U2
1GndTestPoint:TestPoint_Pad_D2.0mmTP5
1HL2305PCM_JLCPCB:Q_SOT-23Q2
1IO22TestPoint:TestPoint_Pad_D1.5mmTP3
1IR-LEDConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ9
1IRLML6344TRPBFIRLML6344TRPBF:TRANS_IRLML6344TRPBFQ1
1Indoor/OutdoorJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP1
1Ir-currentTestPoint:TestPoint_Pad_D1.5mmTP4
1LIS3DHPackage_LGA:LGA-16_3x3mm_P0.5mm_LayoutBorder3x5yU6
1Li-ion Batterypack (6V-8.4V)Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalBT2
1MAX98357APackage_DFN_QFN:TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mmU4
1MCP4531T-103E_MSMCP4561_103E_MS:SOP65P490X110-8NU5
1Motor1Connector_JST:JST_PH_B2B-PH-SM4-TB_1x02-1MP_P2.00mm_VerticalJ5
1Motor2Connector_JST:JST_PH_B2B-PH-SM4-TB_1x02-1MP_P2.00mm_VerticalJ6
1OPA197IDRopa197idr:D0008A-IPC_AU9
1ReloadConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalSW3
1SW_Push_DPDTnnaf:MHPS2266SW5
1SpeakerConnector_JST:JST_PH_B2B-PH-SM4-TB_1x02-1MP_P2.00mm_VerticalJ7
1TPS54302Package_TO_SOT_SMD:SOT-23-6U3
1TestPointTestPoint:TestPoint_Pad_D1.5mmTP7
1TriggerConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalSW2
1USB_C_Receptacle_USB2.0_14PConnector_USB:USB_C_Receptacle_GCT_USB4085J4
1ir-signalTestPoint:TestPoint_Pad_D1.5mmTP6
1total-currentTestPoint:TestPoint_Pad_D1.5mmTP2
1~PCM_JLCPCB:Part_Num_JLCPCBPN1

The 98 most common of 103 parts.

Similar boards

  • 4 layers45 × 29.2 mmPocket 2.66, the printed circuit board in 3D

    Pocket 2.66

    quintenluyten2/Pocket_2.66_E-reader_PCB

    PCB for 2.13" and 2.66" E-ink displays with ESP32-C3, micro-SD card, battery management, and 3 user buttons

    88 parts3
  • 2 layers80 × 50 mmSamd51 gps alarm clock, the printed circuit board in 3D

    Samd51 gps alarm clock

    KrHaaland/GNSS_Alarm_Clock

    GNSS-synchronized alarm clock — custom SAMD51J20A board with nPM1300 Li-ion power (USB-C), offline timezone+DST from coordinates, LVGL 9 on a 428x142 TFT, WAV alarm tunes over USB, battery-backed RTC

    162 parts
  • 2 layers115 × 85.1 mmELV1 revision, the printed circuit board in 3D

    ELV1 revision

    omerikinci/ELV1

    Elektronik kör yük (electronic dummy load) cihazının ilk stabil versiyonu. 150 W ile sınırlandırılmış, 30 V / 10 A aralığını destekler.

    228 parts
  • 4 layers80 × 55 mmAutomoto, the printed circuit board in 3D

    Automoto

    sorcnr/automoto

    a copy of openremote

    62 parts
  • 6 layers80 × 70 mmIMX6 Demo Board from REF, the printed circuit board in 3D

    IMX6 Demo Board from REF

    ts-manuel/iMX6-Demo-Board

    Demo board for the i.MX6ULL Single-Core Processor with Arm Cortex-A7 Core

    504 parts10GPL-3.0
  • 6 layers90 × 89 mmModular processing board, the printed circuit board in 3D

    Modular processing board

    igorwolfs/modular-processing-hw

    MCU Breakout board with Hirose BM28B connector

    177 parts1
  • 2 layers29 × 22 mm5way cv switch, the printed circuit board in 3D

    5way cv switch

    cycfi/5way_cv_switch

    KiCad PCB project — part of the Cycfi Connect series (umbrella repo: cycfi/connect)

    20 parts

Questions

How big is the LaserOps PCB PCB?

It measures 56 × 38 mm and has 4 copper layers, 1.6 mm thick.

What parts does the LaserOps PCB use?

103 parts, built around the ESP32-S3-WROOM-1-N8, LMV321IDBVR, AMS1117 and LIS3DH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LaserOps PCB KiCad files?

From the nico25112005/Nerf-ATG-Electronics repository on GitHub, at the commit this page was made from: the board is LaserOps_PCB.kicad_pcb and its schematic LaserOps_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the LaserOps PCB design in my own project?

Its repository states no licence, so its author keeps all rights: ask nico25112005 before reusing the design.