2 layers65 × 30 mm
CANFDZeroHAT
generationmake/CANFDZeroHAT
Raspberry Pi HAT with Microchip MCP2518FD CAN FD controller
32 parts27
Boards using the MCP2518FD-E/SL
24 boardsBoards in 14 GitHub repositories, designed in KiCad, that use the MCP2518FD-E/SL by Microchip Technology (-40℃~+125℃ 2.7V~5.5V 20mA 8Mbps CAN FD Controller Monitor mode、Low-power mode、Programmable auto retransmission control SPI SOIC-14 CAN Controllers ROHS). See how each wires it, with its parts, size, README and files; the MCP2518FD-E/SL’s symbol, footprint and pinout are on its own page.
- 4 layers100 × 82 mm
LCC Pico Node v3 0B - 1206
bocabob/LCC-RPi-Pico-Board
KiCad files for a board supporting LCC CAN hardware implementation for RPiPico
89 parts3CERN-OHL-S-2.0 - 4 layers98 × 100 mm
Esp32s3-can sd logger
MrBlahhhh/esp32-shield-can1-can2-kdcan-analogin-sdcard
A carrier board an ESP32-S3-DevKitC-1 plugs into, turning it into a vehicle data logger. The dev board brings the MCU and its power; this board brings everything that has to touch a car.
164 parts1 - 4 layers90 × 56.1 mm
K2-cm5-traeger
Gamecard/k2-plus-cm5
K2 Plus CM5 – Creality K2 Plus mit Upstream-Klipper auf einem Raspberry Pi CM5
137 partsGPL-3.0 - 4 layers110 × 100 mm
Icc gateway prerouting r2
moistpope/fisker-icc-gateway
KiCad 10 project. Sits between the car harness and the ICC (head unit) main connector J1 (Molex stAK50h 160013-0641), passes every circuit straight through except the two CAN buses, which go through a Teensy 4.1 gateway…
70 parts - 4 layers100 × 90 mm
- 2 layers100 × 95 mm
- 4 layers106 × 121 mm
CAN Gateway
risingtideresearch/CAN-Gateway
Platform for collecting, logging, interpreting, and relaying CAN messages on multiple busses
487 parts - 2 layers48 × 48 mm
- 2 layers100 × 100 mm
- 4 layers159.9 × 99.9 mm
- 4 layers80 × 82 mm
LCC Pico LiteNode v3B - 0805
bocabob/LCC-RPi-Pico-Board
KiCad files for a board supporting LCC CAN hardware implementation for RPiPico
69 parts3CERN-OHL-S-2.0 - 4 layers80 × 82 mm
LCC Pico LiteNode v3B - 1206
bocabob/LCC-RPi-Pico-Board
KiCad files for a board supporting LCC CAN hardware implementation for RPiPico
69 parts3CERN-OHL-S-2.0 - 4 layers100 × 82 mm
LCC Pico Node v3 0D - 0805
bocabob/LCC-RPi-Pico-Board
KiCad files for a board supporting LCC CAN hardware implementation for RPiPico
89 parts3CERN-OHL-S-2.0 - 4 layers68 × 30 mm
CM3-CARRIER-1
Stab-Rabbit-coding/Serenity-UAV
A functional, security conscious, Unmanned Aerial Vehicle based on the Firefly Class spacecraft Serenity from the 2002 show..
22 parts1CERN-OHL-W-2.0 - 4 layers65 × 48 mm
COMMS HAT-1
Stab-Rabbit-coding/Serenity-UAV
A functional, security conscious, Unmanned Aerial Vehicle based on the Firefly Class spacecraft Serenity from the 2002 show..
25 parts1CERN-OHL-W-2.0 - 4 layers65 × 52 mm
COMMS HAT SWITCH
Stab-Rabbit-coding/Serenity-UAV
A functional, security conscious, Unmanned Aerial Vehicle based on the Firefly Class spacecraft Serenity from the 2002 show..
39 parts1CERN-OHL-W-2.0 - 4 layers46 × 36 mm
SENSORHAT-1
Stab-Rabbit-coding/Serenity-UAV
A functional, security conscious, Unmanned Aerial Vehicle based on the Firefly Class spacecraft Serenity from the 2002 show..
33 parts1CERN-OHL-W-2.0 - 4 layers65 × 48 mm
TRIHAT-1
Stab-Rabbit-coding/Serenity-UAV
A functional, security conscious, Unmanned Aerial Vehicle based on the Firefly Class spacecraft Serenity from the 2002 show..
63 parts1CERN-OHL-W-2.0 - 2 layers159.9 × 99.9 mm
- 4 layers60 × 65 mm
- 4 layers100 × 90 mm
- 2 layers48 × 48 mm
- 2 layers34.5 × 14.2 mm
