4 layers100 × 82 mm
LCC Pico Node v3 0B - 1206
bocabob/LCC-RPi-Pico-Board
KiCad files for a board supporting LCC CAN hardware implementation for RPiPico
89 parts3CERN-OHL-S-2.0
2 layers100 × 100 mm
LEOS sensor
VIP-LES/sensor-pcbSensor PCB stack design.
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 43
- Pads
- 130
- Tracks, vias
- 291, 69
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 27 Sep 2025
- Updated
- 13 Feb 2026
Overview
LEOS sensor is an open-source printed circuit board by VIP-LES, from the VIP-LES/sensor-pcb repository on GitHub. It is a 2-layer board of 100 × 100 mm with 24 parts on 43 nets, routed with 291 tracks and 69 vias.
It is built around the MCP2562FD-E/P, MCP2518FD-E/SL and X322516MLB4SI. Its parts include 11 capacitors, 7 connectors, 2 ICs, 1 resistor and 1 crystal. It belongs with the sensors and measurement boards and the RP2040 boards of this library.
Main components
3
MCP2562FD-E/P
PDIP-8-40℃~+125℃ 15uA 4.5V~5.5V 45mA 8Mbps CAN FD Transceiver PDIP-8 CAN Transceivers ROHSMicrochip TechnologyCAN Transceivers
MCP2518FD-E/SL
SOIC-14-40℃~+125℃ 2.7V~5.5V 20mA 8Mbps CAN FD Controller Monitor mode、Low-power mode、Programmable auto retransmission control SPI SOIC-14 CAN Controllers ROHSMicrochip TechnologyCAN Controllers
X322516MLB4SI
SMD3225-4P-40℃~+85℃ 16MHz 50Ω 9pF Crystal Oscillator ±10ppm ±20ppm SMD3225-4P Crystals ROHSYXCCrystals
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C3, C5, C7, C9, C10 |
| 2 | 12pF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C4, C6 |
| 2 | MicroFit_1x4 | Connector_Molex:Molex_Micro-Fit_3.0_43650-0410_1x04-1MP_P3.00mm_Horizontal_PnP | J1, J2 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C11 |
| 1 | 120R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 40 MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | 47uF | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | AGND Tie | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1 |
| 1 | I2C 0 | Connector_JST:JST_XH_S5B-XH-A_1x05_P2.50mm_Horizontal | J3 |
| 1 | I2C 1 | Connector_JST:JST_XH_S5B-XH-A_1x05_P2.50mm_Horizontal | J4 |
| 1 | MCP2518FD | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U2 |
| 1 | MCP2562FD | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | RaspberryPi_Pico | Module:RaspberryPi_Pico_Common_THT | A1 |
| 1 | SPI 1 | Connector_JST:JST_XH_S8B-XH-A_1x08_P2.50mm_Horizontal | J5 |
| 1 | UART 0 | Connector_JST:JST_XH_S4B-XH-A_1x04_P2.50mm_Horizontal | J6 |
| 1 | UART 1 | Connector_JST:JST_XH_S4B-XH-A_1x04_P2.50mm_Horizontal | J7 |
Questions
How big is the LEOS sensor PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LEOS sensor use?
24 parts, built around the MCP2562FD-E/P, MCP2518FD-E/SL and X322516MLB4SI. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LEOS sensor KiCad files?
From the VIP-LES/sensor-pcb repository on GitHub, at the commit this page was made from: the board is LEOS-sensor.kicad_pcb and its schematic LEOS-sensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LEOS sensor design in my own project?
Its repository states no licence, so its author keeps all rights: ask VIP-LES before reusing the design.
Similar boards
- 4 layers65 × 48 mm
COMMS HAT-1
Stab-Rabbit-coding/Serenity-UAV
A functional, security conscious, Unmanned Aerial Vehicle based on the Firefly Class spacecraft Serenity from the 2002 show..
25 parts1CERN-OHL-W-2.0 - 2 layers65 × 30 mm
CANFDZeroHAT
generationmake/CANFDZeroHAT
Raspberry Pi HAT with Microchip MCP2518FD CAN FD controller
32 parts27 - 4 layers98 × 100 mm
Esp32s3-can sd logger
MrBlahhhh/esp32-shield-can1-can2-kdcan-analogin-sdcard
A carrier board an ESP32-S3-DevKitC-1 plugs into, turning it into a vehicle data logger. The dev board brings the MCU and its power; this board brings everything that has to touch a car.
164 parts1 - 4 layers90 × 56.1 mm
K2-cm5-traeger
Gamecard/k2-plus-cm5
K2 Plus CM5 – Creality K2 Plus mit Upstream-Klipper auf einem Raspberry Pi CM5
137 partsGPL-3.0 - 4 layers110 × 100 mm
Icc gateway prerouting r2
moistpope/fisker-icc-gateway
KiCad 10 project. Sits between the car harness and the ICC (head unit) main connector J1 (Molex stAK50h 160013-0641), passes every circuit straight through except the two CAN buses, which go through a Teensy 4.1 gateway…
70 parts - 4 layers100 × 90 mm
- 2 layers100 × 95 mm
