Skip to the content
12345678EP

MCP2562FD-E/P

Microchip TechnologyExtended

-40℃~+125℃ 15uA 4.5V~5.5V 45mA 8Mbps CAN FD Transceiver PDIP-8 CAN Transceivers ROHS

Part id
microchip/MCP2562FD-E/P
Category
CAN Transceivers
Package
PDIP-8
Pins
8
In stock
61 at JLCPCB (C640346)
Used on
32 open-source boards

Overview

The MCP2562FD-E/P is a CAN Transceiver made by Microchip Technology in a PDIP-8 package with 9 pins. -40℃~+125℃ 15uA 4.5V~5.5V 45mA 8Mbps CAN FD Transceiver PDIP-8 CAN Transceivers ROHS.

PCBKit's library has its KiCad symbol (agg-kicad:MCP2562, from Agg-kicad) and its footprint (agg:DFN-8-EP-MICROCHIP, from Agg-kicad), ready for a KiCad board. 61 are in stock at JLCPCB (part C640346). 32 open-source boards in 24 repositories on GitHub use it.

Symbol

5VIO3VDD2VSSEPVSS8STBY7CANH6CANL1TXD4RXD
agg-kicad:MCP2562From Agg-kicad

Footprint

12345678EP
agg:DFN-8-EP-MICROCHIPFrom Agg-kicad

Pinout

9
The pins of the MCP2562FD-E/P
PinNameType
1TXDInput
2VSSPower in
3VDDPower in
4RXDOutput
5VIOPower in
6CANLTri-state
7CANHTri-state
8STBYInput
EPVSSPower in

Open-source boards using it

32See all 32
  • 2 layers78 × 124 mmNMEA2000Module, the printed circuit board in 3D

    NMEA2000Module

    ieb/EngineMonitor

    SenseESP based Engine Monitor for VolvoPenta D2-40

    46 parts10
  • 2 layers17 × 35.5 mmUSBtoCANFD, the printed circuit board in 3D

    USBtoCANFD

    rbtsco/USB2CAN

    Tiny USB to 8Mbps Flexible-Data CAN (/ AUVCAN) adapter based on the STM32L5 and MCP2562FD

    32 parts10
  • 4 layers100 × 82 mmLCC Pico Node v3 0B - 1206, the printed circuit board in 3D

    LCC Pico Node v3 0B - 1206

    bocabob/LCC-RPi-Pico-Board

    KiCad files for a board supporting LCC CAN hardware implementation for RPiPico

    89 parts3CERN-OHL-S-2.0
  • 6 layers160 × 145 mmMes main board, the printed circuit board in 3D

    Mes main board

    jmh8231-Dev/mes-main-board

    STM32MP257 Embedded Main Board

    736 parts3
  • 2 layers67.7 × 49.8 mmAn2can, the printed circuit board in 3D

    An2can

    eagletrt/an2can

    Analog to digital conversion system that outputs data over CAN BUS

    156 parts1
  • 4 layers80 × 140 mmIOB V3, the printed circuit board in 3D

    IOB V3

    SpaceTeam/Lamarr_IOB_V3

    280 parts1
  • 4 layers200 × 115 mmClampinator, the printed circuit board in 3D

    Clampinator

    AdrianR3/Clampinator

    Inspired by the ODrive Regen Clamp, the clampinator is a custom built regeneration clamp targeting 16-60V systems.

    211 parts
  • 4 layers68.1 × 39.5 mmCAN serializer, the printed circuit board in 3D

    CAN serializer

    ale-giustina/CAN-serializer

    A 3 interface FDCAN serializer based on a STM32G473CCTx

    115 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MCP2562FD-E/P?

Yes. The symbol is agg-kicad:MCP2562 and the footprint agg:DFN-8-EP-MICROCHIP, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MCP2562FD-E/P?

PDIP-8, with 9 pins. Its footprint is drawn on this page.

Where is the MCP2562FD-E/P datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MCP2562FD-E/P?

JLCPCB lists it as part C640346, with 61 in stock; the sellers' links on this page open their listings.

What can replace the MCP2562FD-E/P?

Parts like it in the library: the MCP2562-E/MF by Microchip Technology, the MCP2562M/TR-HG by HGSEMI, the MCP2562FD-H/SN by Microchip Technology and the MCP2562-E/P by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MCP2562FD-E/P?

32 boards in 24 repositories on GitHub; the most starred are listed on this page, with their KiCad files.