
MCP2562FD-H/SN
Microchip TechnologyExtended
-40℃~+150℃ 1 15uA 4.5V~5.5V 45mA 8Mbps CAN FD Transceiver SOIC-8 CAN Transceivers ROHS
- Part id
- microchip/MCP2562FD-H/SN
- Category
- CAN Transceivers
- Package
- SOIC-8
- Pins
- 8
- In stock
- 59 at JLCPCB (C623224)
- Used on
- 1 open-source board
Overview
The MCP2562FD-H/SN is a CAN Transceiver made by Microchip Technology in a SOIC-8 package with 9 pins. -40℃~+150℃ 1 15uA 4.5V~5.5V 45mA 8Mbps CAN FD Transceiver SOIC-8 CAN Transceivers ROHS.
PCBKit's library has its KiCad symbol (agg-kicad:MCP2562, from Agg-kicad) and its footprint (agg:DFN-8-EP-MICROCHIP, from Agg-kicad), ready for a KiCad board. 59 are in stock at JLCPCB (part C623224). 1 open-source board in 1 repository on GitHub use it.
Symbol
Footprint
From the datasheet
12- Supply, least
- 4.5 V · VDD, recommended operating min · p. 9
- Supply, most
- 5.5 V · VDD, recommended operating max · p. 9
- Supply, least
- 1.8 V · VIO, recommended operating min · p. 9
- Supply, absolute maximum
- 7 V · VDD, absolute max · p. 8
- Works from
- -40 °C · Operating ambient min · p. 8
- Works up to
- 150 °C · Operating ambient max · p. 8
- Junction, hottest
- 190 °C · Virtual junction temperature absolute max · p. 8
- Takes working
- 5.004 mA · sum of VDD and VIO typical recessive supply currents · p. 9
- Takes at most
- 70.5 mA · sum of VDD and VIO max dominant supply currents · p. 9
- Takes asleep
- 5 µA · Standby typical, includes IIO · p. 9
- Data rate, most
- 5 Mbit/s · Bit frequency max · p. 13
- Junction to air (8L-SOIC)
- 149.5 K/W · Junction to ambient typical · p. 16
What it is and has
7- Digital I/O interface
- Internal level shifter with VIO supply · p. 1
- Protection
- Automatic thermal shutdown · p. 1
- Package options
- PDIP-8L, SOIC-8L and 3x3 DFN-8L · p. 1
- Temperature grade
- High (H): -40°C to +150°C · p. 1
- System voltage suitability
- 12V and 24V systems · p. 1
- Protection
- Permanent dominant detection on TXD · p. 1
- Protection
- Permanent dominant detection on bus · p. 1
Specifications
79| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| VDD VDD | max 7 V | 8 | |
| VIO VIO | max 7 V | 8 | |
| DC Voltage at TXD, RXD, STBY and VSS | min -0.3 V | 8 | |
| DC Voltage at CANH, CANL and SPLIT | CANH and CANL apply to MCP2562FD | min -58 · max 58 V | 8 |
| Transient Voltage on CANH, CANL | ISO-7637; See Figure 2-5 | min -150 · max 100 V | 8 |
| Storage temperature | min -55 · max 150 °C | 8 | |
| Operating ambient temperature | min -40 · max 150 °C | 8 | |
| Virtual Junction Temperature TVJ | IEC60747-1 | min -40 · max 190 °C | 8 |
| Soldering temperature of leads | 10 seconds | max 300 °C | 8 |
| ESD protection on CANH and CANL pins for MCP2562FD | IEC 61000-4-2 | min -8 · max 8 kV | 8 |
| ESD protection on CANH and CANL pins | IEC 801; Human Body Model | min -8 · max 8 kV | 8 |
| ESD protection on all other pins | IEC 801; Human Body Model | min -4 · max 4 kV | 8 |
| ESD protection on all pins | IEC 801; Machine Model | min -300 · max 300 V | 8 |
| ESD protection on all pins | IEC 801; Charge Device Model | min -750 · max 750 V | 8 |
| Voltage Range VDD | VDD Pin; High (H) | min 4.5 · max 5.5 V | 9 |
| Supply Current IDD | Recessive; VTXD = VDD | typ 5 · max 10 mA | 9 |
| Supply Current IDD | Dominant; VTXD = 0V | typ 45 · max 70 mA | 9 |
| Standby Current IDDS | MCP2562FD; Includes IIO | typ 5 · max 15 uA | 9 |
| High Level of the POR Comparator VPORH | min 3.8 · max 4.3 V | 9 | |
| Low Level of the POR Comparator VPORL | min 3.4 · max 4 V | 9 | |
| Hysteresis of POR Comparator VPORD | min 0.3 · max 0.8 V | 9 | |
| Digital Supply Voltage Range VIO | MCP2562FD | min 1.8 · max 5.5 V | 9 |
| Supply Current on VIO IIO | Recessive; VTXD = VIO | typ 4 · max 30 uA | 9 |
| Supply Current on VIO IIO | Dominant; VTXD = 0V | typ 85 · max 500 uA | 9 |
| Standby Current IDDS | VIO Pin; Note 1 | typ 0.3 · max 1 uA | 9 |
| Undervoltage detection on VIO VUVD(IO) | Note 1 | typ 1.2 V | 9 |
| CANH; CANL: Recessive Bus Output Voltage VO(R) | VTXD = VDD; No load | min 2 · max 3 V | 9 |
| CANH; CANL: Bus Output Voltage in Standby VO(S) | STBY = VTXD = VDD; No load | min -0.1 · typ 0 · max 0.1 V | 9 |
| Recessive Output Current IO(R) | -24V < VCAN < +24V | min -5 · max 5 mA | 9 |
| CANH: Dominant Output Voltage VO(D) | TXD = 0; RL = 50 to 65 | min 2.75 · typ 3.5 · max 4.5 V | 9 |
| CANL: Dominant Output Voltage VO(D) | RL = 50 to 65 | min 0.5 · typ 1.5 · max 2.25 V | 9 |
| Symmetry of Dominant Output Voltage (VDD – VCANH – VCANL) VO(D)(M) | VTXD = VSS; Note 1 | min -400 · typ 0 · max 400 mV | 9 |
| Dominant: Differential Output Voltage VO(DIFF) | VTXD = VSS; RL = 50 to 65; Figure 2-2, Figure 2-4 | min 1.5 · typ 2 · max 3 V | 9 |
| Recessive: Differential Output Voltage VO(DIFF) | VTXD = VDD; Figure 2-2, Figure 2-4 | min -120 · typ 0 · max 12 mV | 9 |
| Recessive: Differential Output Voltage VO(DIFF) | VTXD = VDD, no load; Figure 2-2, Figure 2-4 | min -500 · typ 0 · max 50 mV | 9 |
| CANH: Short Circuit Output Current IO(SC) | VTXD = VSS; VCANH = 0V; CANL: floating | min -120 · typ 85 mA | 10 |
| CANH: Short Circuit Output Current IO(SC) | VTXD = VSS; VCANH = 0V; CANL floating; VDD=5V, TAMB = 25°C; Note 1 | min -100 mA | 10 |
| CANL: Short Circuit Output Current IO(SC) | VTXD = VSS; VCANL = 18V; CANH: floating | typ 75 · max 120 mA | 10 |
| CANL: Short Circuit Output Current IO(SC) | VTXD = VSS; VCANL = 18V; CANH floating; VDD=5V, TAMB = 25°C; Note 1 | max 100 mA | 10 |
| Recessive Differential Input Voltage VDIFF(R)(I) | Normal Mode; -12V < V(CANH, CANL) < +12V; See Figure 2-6; Note 3 | min -1 · max 0.5 V | 10 |
| Recessive Differential Input Voltage VDIFF(R)(I) | Standby Mode; -12V < V(CANH, CANL) < +12V; See Figure 2-6; Note 3 | min -1 · max 0.4 V | 10 |
| Dominant Differential Input Voltage VDIFF(D)(I) | Normal Mode; -12V < V(CANH, CANL) < +12V; See Figure 2-6; Note 3 | min 0.9 V | 10 |
| Dominant Differential Input Voltage VDIFF(D)(I) | Standby Mode; -12V < V(CANH, CANL) < +12V; See Figure 2-6; Note 3 | min 1 V | 10 |
| Differential Receiver Threshold VTH(DIFF) | Normal Mode; -12V < V(CANH, CANL) < +12V; See Figure 2-6; Note 3 | min 0.5 · typ 0.7 · max 0.9 V | 10 |
| Differential Receiver Threshold VTH(DIFF) | Standby Mode; -12V < V(CANH, CANL) < +12V; See Figure 2-6; Note 3 | min 0.4 · max 1.15 V | 10 |
| Differential Input Hysteresis VHYS(DIFF) | Normal mode, see Figure 2-6; Note 1 | min 50 · max 200 mV | 10 |
| Common Mode Input Resistance RIN | Note 1 | min 10 · max 30 k | 10 |
| Common Mode Resistance Matching RIN(M) | VCANH = VCANL; Note 1 | min -1 · typ 0 · max 1 % | 10 |
| Differential Input Resistance RIN(DIFF) | Note 1 | min 10 · max 100 k | 10 |
| Common Mode Input Capacitance CIN(CM) | VTXD = VDD; Note 1 | max 20 pF | 10 |
| Differential Input Capacitance CIN(DIFF) | VTXD = VDD; Note 1 | max 10 pF | 10 |
| CANH, CANL: Input Leakage ILI | VDD = VTXD = VSTBY = 0V; MCP2562FD VIO = 0V; VCANH = VCANL = 5 V | min -5 · max 5 uA | 10 |
| Low-Level Input Voltage VIL | TXD, STBY | min -0.3 V | 11 |
| High-Level Input Current IIH | TXD, STBY | min -1 · max 1 uA | 11 |
| TXD: Low-Level Input Current IIL(TXD) | min -270 · typ -150 · max -30 uA | 11 | |
| STBY: Low-Level Input Current IIL(STBY) | min -30 · max -1 uA | 11 | |
| Low-Level Output Voltage VOL | RXD; IOL = 4 mA; typical 8 mA | max 0.4 V | 11 |
| Shutdown Junction Temperature TJ(SD) | -12V < V(CANH, CANL) < +12V; Note 1 | min 165 · typ 175 · max 185 °C | 11 |
| Shutdown Temperature Hysteresis TJ(HYST) | -12V < V(CANH, CANL) < +12V; Note 1 | min 20 · max 30 °C | 11 |
| Bit Time tBIT | min 0.2 · max 69.44 us | 13 | |
| Bit Frequency fBIT | min 14.4 · max 5000 kHz | 13 | |
| Delay TXD Low to Bus Dominant tTXD-BUSON | Note 1 | typ 65 ns | 13 |
| Delay TXD High to Bus Recessive tTXD-BUSOFF | Note 1 | typ 90 ns | 13 |
| Delay Bus Dominant to RXD tBUSON-RXD | Note 1 | typ 60 ns | 13 |
| Delay Bus Recessive to RXD tBUSOFF-RXD | Note 1 | typ 65 ns | 13 |
| Propagation Delay TXD to RXD tTXD - RXD | typ 90 · max 120 ns | 13 | |
| Propagation Delay TXD to RXD tTXD - RXD | RL = 120, CL = 200 pF; Note 1 | typ 120 · max 180 ns | 13 |
| Recessive bit time on RXD - 2 Mbps, Loop Delay Symmetry tBIT(RXD),2M | tBIT(TXD) = 500 ns; see Figure 2-10 | min 450 · typ 485 · max 550 ns | 13 |
| Recessive bit time on RXD - 2 Mbps, Loop Delay Symmetry tBIT(RXD),2M | tBIT(TXD) = 500 ns; see Figure 2-10; RL = 120, CL = 200 pF; Note 1 | min 400 · typ 460 · max 550 ns | 13 |
| Recessive bit time on RXD - 5 Mbps, Loop Delay Symmetry tBIT(RXD),5M | tBIT(TXD) = 200 ns; see Figure 2-10 | min 160 · typ 185 · max 220 ns | 13 |
| Recessive bit time on RXD - 8 Mbps, Loop Delay Symmetry tBIT(RXD),8M | tBIT(TXD) = 120 ns; see Figure 2-10; Note 1 | min 85 · typ 105 · max 140 ns | 13 |
| Delay Bus Dominant to RXD (Standby mode) tFLTR(WAKE) | Standby mode | min 0.5 · typ 1 · max 4 us | 13 |
| Delay Standby to Normal Mode tWAKE | Negative edge on STBY | min 5 · typ 25 · max 40 us | 13 |
| Permanent Dominant Detect Time tPDT | TXD = 0V | typ 1.25 ms | 13 |
| Permanent Dominant Timer Reset tPDTR | The shortest Recessive pulse on TXD or CAN bus to reset Permanent Dominant Timer | typ 100 ns | 13 |
| Specified Temperature Range TA | High (H) | min -40 · max 150 C | 16 |
| Operating Temperature Range TA | min -40 · max 150 C | 16 | |
| Storage Temperature Range TA | min -65 · max 155 C | 16 | |
| Thermal Resistance, 8L-SOIC JA | 8L-SOIC | typ 149.5 C/W | 16 |
Pins, by the datasheet
8- 1 TXD
- Transmit Data Input · p. 4
- 2 VSS
- Ground · p. 4
- 3 VDD
- Supply Voltage · p. 4
- 4 RXD
- Receive Data Output · p. 4
- 5 VIO
- Digital I/O Supply Pin - MCP2562FD only · p. 4
- 6 CANL
- CAN Low-Level Voltage I/O · p. 4
- 7 CANH
- CAN High-Level Voltage I/O · p. 4
- 8 STBY
- Standby Mode Input · p. 4
Open-source boards using it
1- 4 layers100 × 80 mm

Parts like it
8MCP2562-E/MF
DFN-8-EP(3x3)-40℃~+125℃ 1 15uA 1Mbps 4.5V~5.5V 70mA CAN Transceiver DFN-8-EP(3x3) CAN Transceivers ROHSMicrochip TechnologyCAN TransceiversMCP2562M/TR-HG
SOP-8Low-power mode、Wake-up function、TXD dominant timeout、ESD protection、Undervoltage Protection、Thermal shutdown protection、Short-Circuit Protection、Integrated level shifting SOP-8 CAN Transceivers ROHSHGSEMICAN TransceiversMCP2562FD-E/P
PDIP-8-40℃~+125℃ 15uA 4.5V~5.5V 45mA 8Mbps CAN FD Transceiver PDIP-8 CAN Transceivers ROHSMicrochip TechnologyCAN TransceiversMCP2562-E/P
PDIP-8-40℃~+125℃ 1 15uA 1Mbps 4.5V~5.5V 45mA CAN Transceiver PDIP-8 CAN Transceivers ROHSMicrochip TechnologyCAN TransceiversMCP2562-H/SN
SOIC-8-40℃~+150℃ 1 15uA 1Mbps 4.5V~5.5V 45mA CAN Transceiver SOIC-8 CAN Transceivers ROHSMicrochip TechnologyCAN TransceiversMCP2562-H/MF
DFN-8-EP(3x3)-40℃~+150℃ 4.5V~5.5V DFN-8-EP(3x3) CAN Transceivers ROHSMicrochip TechnologyCAN TransceiversMCP2562FD-H/MF
DFN-8(3x3)-40℃~+150℃ 1 15uA 4.5V~5.5V 45mA 8Mbps CAN FD Transceiver DFN-8(3x3) CAN Transceivers ROHSMicrochip TechnologyCAN TransceiversMCP2562FD-E/MF
DFN-8-EP(3x3)-40℃~+125℃ 1 15uA 4.5V~5.5V 45mA 8Mbps CAN FD Transceiver Low-power mode、Wake-up function、TXD dominant timeout、ESD protection、Undervoltage Protection、Thermal shutdown protection、Bus fault protection、Short-Circuit Protection、Integrated level shifting DFN-8-EP(3x3) CAN Transceivers ROHSMicrochip TechnologyCAN Transceivers
Questions
Is there a KiCad symbol and footprint for the MCP2562FD-H/SN?
Yes. The symbol is agg-kicad:MCP2562 and the footprint agg:DFN-8-EP-MICROCHIP, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the MCP2562FD-H/SN?
SOIC-8, with 9 pins. Its footprint is drawn on this page.
Where is the MCP2562FD-H/SN datasheet?
Microchip Technology publishes it: the Datasheet link on this page opens it.
Where can I order the MCP2562FD-H/SN?
JLCPCB lists it as part C623224, with 59 in stock; the sellers' links on this page open their listings.
What can replace the MCP2562FD-H/SN?
Parts like it in the library: the MCP2562-E/MF by Microchip Technology, the MCP2562M/TR-HG by HGSEMI, the MCP2562FD-E/P by Microchip Technology and the MCP2562-E/P by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the MCP2562FD-H/SN?
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.