Skip to the content

Boards using the 24LC1025-I/P

102 boards

Boards in 95 GitHub repositories, designed in KiCad, that use the 24LC1025-I/P by Microchip Technology (-40℃~+85℃ 1,000,000 cycles 2.5V~5.5V 200 Years 400kHz 5ms Hardware write protection function、Noise suppression function I2C PDIP-8 EEPROM ROHS). See how each wires it, with its parts, size, README and files; the 24LC1025-I/P’s symbol, footprint and pinout are on its own page.

  • 2 layers50.2 × 31.2 mmMCU Datalogger, the printed circuit board in 3D

    MCU Datalogger

    futureshocked/KLP4e_MCU-Datalogger

    This is the repository for the "MCU Datalogger" project.

    31 parts138MIT
  • 2 layers284.7 × 94.2 mmNyan keys v09b, the printed circuit board in 3D

    Nyan keys v09b

    portlandhodl/nyan-keys-hardware

    Hardware document for the nyan keys keyboard

    144 parts96Apache-2.0
  • 2 layers100.8 × 40 mmKM217-WiFi, the printed circuit board in 3D

    KM217-WiFi

    the78mole/km271-wifi

    A piece of hardware to be installed in a Buderus Logamatic 2107 to provide control and status over WiFi

    120 parts44
  • 2 layers42.7 × 24.4 mmBACEE, the printed circuit board in 3D

    BACEE

    futureshocked/KicadLikeAPro-Project-3-BACEE

    This is one of the PCB projects from the Kicad Like a Pro book. It contains a two and four layer board that implements an Arduino clone with external EEPROM and a clock.

    20 parts19MIT
  • 2 layers284 × 128.5 mmXva1-ui, the printed circuit board in 3D

    Xva1-ui

    MacMannes/XVA1-User-Interface

    A hardware user interface for the XVA1 virtual analog synthesizer, inspired by the Hydrasynth's layout. The XVA1 (and its FM sibling the XFM2) is built on an Artix-7 FPGA but has no built-in UI — this project adds one.

    65 parts10GPL-3.0
  • 2 layers130 × 80 mmPico controller, the printed circuit board in 3D

    Pico controller

    cclienti/tig-welder

    A DIY TIG welder that can be plugged to a traditionnal stick welder or to a high current source

    125 parts8GPL-3.0
  • 4 layers49.3 × 34.1 mmDattalogger Board, the printed circuit board in 3D

    Dattalogger Board

    DevMajed/DataLogger-Board

    Hardware PCB Design for AVR-based Datalogger using KiCAD

    30 parts4
  • 4 layers132.3 × 214.1 mmUtracer11.unrouted, the printed circuit board in 3D

    Utracer11.unrouted

    j-hoppe/uTracer11

    flipchip probe and host GUI to visualize intenral operation of PDP-11 CPU

    129 parts2BSD-3-Clause
  • 2 layers41.4 × 27.7 mmDuinoClone, the printed circuit board in 3D

    DuinoClone

    ARHollisSr/DuinoClone

    Arduino Clone with extended EEPROM

    20 parts1MIT
  • 4 layers49 × 27.9 mmMCU Datalogger, the printed circuit board in 3D

    MCU Datalogger

    elCowboyLuigi/MCU_datalogger_project_study

    This is a PCB project of a MCU Datalogger with EEPROM and Clock from section 11 of PCB Design with Kicad course for use as a learning experience

    31 parts1
  • 4 layers50 × 30 mmDatalogger v1, the printed circuit board in 3D

    Datalogger v1

    GildardoRestrepo/course_electronics_design

    Repositorio de actividades entregables del curso de diseño electrónico. UPB 2026-02

    35 parts1MIT
  • 2 layers52.2 × 34.4 mmMCU DataLoggerPCB, the printed circuit board in 3D

    MCU DataLoggerPCB

    lologog/MCU_DataLogger

    A microcontroller-based device for logging and storing data from external sensors. The data is saved to EEPROM memory for later retrieval and analysis

    30 parts1MIT
  • 2 layers51.4 × 38.7 mmLayout (2 Layer), the printed circuit board in 3D

    Layout (2 Layer)

    VishwanathKambalyal/MCU-Data-Logger

    Data logger

    30 parts1
  • 2 layers41.9 × 29 mmProject3 bacee 2 layer, the printed circuit board in 3D

    Project3 bacee 2 layer

    adamfalkowski/Arduino-Clone---BACEE

    PCB Design, https://help.github.com/en/github/importing-your-projects-to-github/adding-an-existing-project-to-github-using-the-command-line

    17 parts
  • 2 layers47.6 × 30.5 mmMCU Datalogger, the printed circuit board in 3D

    MCU Datalogger

    adixit-03/kicad_project

    29 parts
  • 2 layers55.2 × 35 mmMCU DataLogger, the printed circuit board in 3D

    MCU DataLogger

    AhmedOsama21998/MCU-DataLogger-ATmega328P

    A KiCad PCB design for an ATmega328P-based data-logger platform. The supplied schematic includes an ATmega328P microcontroller, a DS1337S real-time clock, two 24LC1025 I²C EEPROM devices, a 16 MHz crystal, and…

    22 parts
  • 2 layers64.5 × 51.8 mmAVR microcontroller, the printed circuit board in 3D

    AVR microcontroller

    Ali-Badawy05/AVR-MCU-DataLogger-Board

    A graduation-project PCB designed in KiCad around the ATmega328P-AU microcontroller. The board is designed as an MCU-based data logger with persistent storage, real-time timestamping, status indicators, and accessible…

    34 parts
  • 2 layers46.8 × 30.5 mmMCU Datalogger, the printed circuit board in 3D

    MCU Datalogger

    alihazzem/MCU-Datalogger-PCB-Design

    29 parts
  • 2 layers50.5 × 30.6 mmMCU Data Logger, the printed circuit board in 3D

    MCU Data Logger

    BBIkal/ATmega328P-MCU-Data-Logger

    An ATmega328P-based data logger PCB designed in KiCad 9, featuring both 2-layer and 4-layer layout versions from the same schematic for direct comparison.

    30 parts
  • 2 layers50.3 × 30.1 mmMCU datalogger, the printed circuit board in 3D

    MCU datalogger

    BenjaminHaaseT/MCU_datalogger

    Simple datalogging pcb with ATMEGA MCU

    30 parts
  • 4 layers51.3 × 33.9 mmProject 3 MCUdatalogger, the printed circuit board in 3D

    Project 3 MCUdatalogger

    cacortes694/KiCAD-Like-a-Pro-Project-3

    Carlos Cortes' KiCad Repository for his personal projects and team projects

    30 parts
  • 2 layers39.6 × 37.6 mmP03BASCEE, the printed circuit board in 3D

    P03BASCEE

    cardosorapha/BASCEE

    Repositório da placa de desenvolvimento ATMega customizada com EEPROM.

    23 parts