
MCU Datalogger
futureshocked/KLP4e_MCU-Datalogger
This is the repository for the "MCU Datalogger" project.
Microchip TechnologyExtended
-40℃~+85℃ 1,000,000 cycles 2.5V~5.5V 200 Years 400kHz 5ms Hardware write protection function、Noise suppression function I2C PDIP-8 EEPROM ROHS
The 24LC1025-I/P is an EEPROM made by Microchip Technology in a PDIP-8 package with 8 pins. -40℃~+85℃ 1,000,000 cycles 2.5V~5.5V 200 Years 400kHz 5ms Hardware write protection function、Noise suppression function I2C PDIP-8 EEPROM ROHS.
PCBKit's library has its KiCad symbol (Memory_EEPROM:24LC1025, from KiCad's library) and its footprint (Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 58 are in stock at JLCPCB (part C613693). 102 open-source boards in 95 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | A0 | Input |
| 2 | A1 | Input |
| 3 | A2 | Input |
| 4 | GND | Power in |
| 5 | SDA | Input/output |
| 6 | SCL | Input |
| 7 | WP | Input |
| 8 | VCC | Power in |

futureshocked/KLP4e_MCU-Datalogger
This is the repository for the "MCU Datalogger" project.

portlandhodl/nyan-keys-hardware
Hardware document for the nyan keys keyboard

the78mole/km271-wifi
A piece of hardware to be installed in a Buderus Logamatic 2107 to provide control and status over WiFi

futureshocked/KicadLikeAPro-Project-3-BACEE
This is one of the PCB projects from the Kicad Like a Pro book. It contains a two and four layer board that implements an Arduino clone with external EEPROM and a clock.

MacMannes/XVA1-User-Interface
A hardware user interface for the XVA1 virtual analog synthesizer, inspired by the Hydrasynth's layout. The XVA1 (and its FM sibling the XFM2) is built on an Artix-7 FPGA but has no built-in UI — this project adds one.

cclienti/tig-welder
A DIY TIG welder that can be plugged to a traditionnal stick welder or to a high current source

DevMajed/DataLogger-Board
Hardware PCB Design for AVR-based Datalogger using KiCAD

j-hoppe/uTracer11
flipchip probe and host GUI to visualize intenral operation of PDP-11 CPU
Yes. The symbol is Memory_EEPROM:24LC1025 and the footprint Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.
PDIP-8, with 8 pins. Its footprint is drawn on this page.
Microchip Technology publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C613693, with 58 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the AT24C32N by HGSEMI, the 24LC64-I/P by Microchip Technology, the FT24C64A-EDR-B by FMD and the 24LC128-I/P by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.
102 boards in 95 repositories on GitHub; the most starred are listed on this page, with their KiCad files.