Skip to the content
12345678

24LC128-I/P

Microchip TechnologyExtended

-40℃~+85℃ 1,000,000 cycles 128Kbit 2.5V~5.5V 200 Years 400kHz 5ms Hardware write protection function、Noise suppression function I2C PDIP-8 EEPROM ROHS

Part id
microchip/24LC128-I/P
Category
EEPROM
Package
PDIP-8
Pins
8
In stock
62 at JLCPCB (C613697)
Used on
11 open-source boards

Overview

The 24LC128-I/P is an EEPROM made by Microchip Technology in a PDIP-8 package with 8 pins. -40℃~+85℃ 1,000,000 cycles 128Kbit 2.5V~5.5V 200 Years 400kHz 5ms Hardware write protection function、Noise suppression function I2C PDIP-8 EEPROM ROHS.

PCBKit's library has its KiCad symbol (Memory_EEPROM:24LC128, from KiCad's library) and its footprint (Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 62 are in stock at JLCPCB (part C613697). 11 open-source boards in 10 repositories on GitHub use it.

Symbol

1A02A13A24GND5SDA6SCL7WP8VCC
Memory_EEPROM:24LC128From KiCad's library

Footprint

12345678
Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPadsFrom KiCad's library

Pinout

8
The pins of the 24LC128-I/P
PinNameType
1A0Input
2A1Input
3A2Input
4GNDPower in
5SDAInput/output
6SCLInput
7WPInput
8VCCPower in

Open-source boards using it

11See all 11
  • 2 layers58.2 × 38.1 mmUsb sniffer, the printed circuit board in 3D

    Usb sniffer

    ataradov/usb-sniffer

    Low-cost LS/FS/HS USB sniffer with Wireshark interface

    87 parts1.3kBSD-3-Clause
  • 2 layers85.1 × 62.2 mmMic extension board, the printed circuit board in 3D

    Mic extension board

    StoneRose35/cortexguitarfx

    guitar effects processor implemented on various arm cortex platforms

    75 parts146
  • 2 layers65 × 56.5 mmPitail, the printed circuit board in 3D

    Pitail

    mcb30/dw1000

    DecaWave DW1000 Linux kernel driver

    372 parts19
  • 4 layers100 × 100 mmSDR board, the printed circuit board in 3D

    SDR board

    BillyWoods/Narrowband-SDR

    A four-channel narrowband SDR receiver based around the Mirics MSi001, MAX11131 and FX2LP.

    467 parts16
  • 4 layers42.7 × 68.1 mmFpgb, the printed circuit board in 3D

    Fpgb

    dotcypress/fpgb

    Forth Programmable Breadboard

    35 parts11Apache-2.0
  • 4 layers90.9 × 100 mmTycho, the printed circuit board in 3D

    Tycho

    greatscottgadgets/tycho

    Production test jig for Cynthion

    168 parts7CERN-OHL-P-2.0
  • 2 layers49.5 × 5.7 mmCAP EEPROM-24LC, the printed circuit board in 3D

    CAP EEPROM-24LC

    CrashBangProto/CAP_EEPROM-24LC

    Toadstool CAP - EEPROM 24LC

    8 partsGPL-3.0
  • 4 layers101.6 × 53.3 mmRC202-68000 SIO 1, the printed circuit board in 3D

    RC202-68000 SIO 1

    MarkD833/RCBUS-68xxx

    My Motorola 68000 & 68302 processors (+ SIO, PIO & MFP boards) for the RCBus ecosystem.

    42 parts8GPL-3.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the 24LC128-I/P?

Yes. The symbol is Memory_EEPROM:24LC128 and the footprint Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the 24LC128-I/P?

PDIP-8, with 8 pins. Its footprint is drawn on this page.

Where is the 24LC128-I/P datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the 24LC128-I/P?

JLCPCB lists it as part C613697, with 62 in stock; the sellers' links on this page open their listings.

What can replace the 24LC128-I/P?

Parts like it in the library: the AT24C32N by HGSEMI, the 24LC64-I/P by Microchip Technology, the FT24C64A-EDR-B by FMD and the 24LC1025-I/P by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the 24LC128-I/P?

11 boards in 10 repositories on GitHub; the most starred are listed on this page, with their KiCad files.