
Dspic controller
cclienti/tig-welder
A DIY TIG welder that can be plugged to a traditionnal stick welder or to a high current source

A DIY TIG welder that can be plugged to a traditionnal stick welder or to a high current source
Pico controller is an open-source printed circuit board by cclienti, from the cclienti/tig-welder repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 130 × 80 mm with 125 parts on 81 nets, routed with 1,002 tracks and 36 vias.
It is built around the IR2110L4, MCP3208-BI/P and 24LC1025-I/P, with the BSS138, STTH212U and BC817 among its other parts. Its parts include 49 resistors, 18 transistors, 18 connectors, 17 capacitors and 7 diodes. It belongs with the RP2040 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 25 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R10, R11, R12, R13, R17, R20, R21, R22, R23, R24, R25, R26, R27, R28 +9 |
| 15 | BSS138 | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12, Q13, Q15, Q16 |
| 10 | 100n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C3, C5, C6, C8, C9, C10, C11, C12, C17 |
| 8 | 4.7k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6, R7, R8, R9, R18, R19, R46, R47 |
| 6 | 10 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R32, R33, R39, R40, R41, R42 |
| 6 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J10, J11, J12, J13, J14, J15 |
| 6 | STTH212U | Diode_SMD:D_SMB | D3, D4, D6, D7, D8, D9 |
| 5 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J16, J17, J18, J19, J20 |
| 4 | 22 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R35, R36, R37, R38 |
| 4 | 470n | Capacitor_THT:C_Rect_L13.0mm_W6.0mm_P10.00mm_FKS3_FKP3_MKS4 | C13, C14, C15, C16 |
| 4 | Jumper_2_Bridged | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1, JP2, JP3, JP4 |
| 4 | MountingHole | MountingHole:MountingHole_3mm | H1, H2, H3, H4 |
| 3 | 3.3k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R15, R16, R34 |
| 2 | 1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R48, R49 |
| 2 | BC817 | Package_TO_SOT_SMD:SOT-23 | Q17, Q18 |
| 2 | Conn_01x02_Male | Connector_Phoenix_MSTB:PhoenixContact_MSTBVA_2,5_2-G-5,08_1x02_P5.08mm_Vertical | J1, J3 |
| 2 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8, J9 |
| 2 | IR2110 | Package_DIP:DIP-14_W7.62mm | U5, U6 |
| 1 | 1.5k 0.1% | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R14 |
| 1 | 100u 16V | Capacitor_SMD:CP_Elec_6.3x5.4 | C2 |
| 1 | 100u 25V | Capacitor_SMD:CP_Elec_6.3x7.7 | C7 |
| 1 | 10u 25V | Capacitor_SMD:CP_Elec_5x5.3 | C4 |
| 1 | 24LC1025 | Package_DIP:DIP-8_W7.62mm | U3 |
| 1 | Conn_01x06_Male | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J21 |
| 1 | Conn_01x07_Male | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J23 |
| 1 | LCD I2C | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J22 |
| 1 | LM4040DBZ-5.0 | Package_TO_SOT_SMD:SOT-23_Handsoldering | U2 |
| 1 | MBR1020VL | Diode_SMD:D_SMA | D5 |
| 1 | MCP3208 | Package_DIP:DIP-16_W7.62mm | U1 |
| 1 | Pico | RPi_Pico:RPi_Pico_SMD_TH | U4 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1 |
| 1 | Speaker | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | LS1 |
| 1 | TIP122 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | Q14 |

cclienti/tig-welder
A DIY TIG welder that can be plugged to a traditionnal stick welder or to a high current source

cclienti/tig-welder
A DIY TIG welder that can be plugged to a traditionnal stick welder or to a high current source

cclienti/tig-welder
A DIY TIG welder that can be plugged to a traditionnal stick welder or to a high current source

cclienti/tig-welder
A DIY TIG welder that can be plugged to a traditionnal stick welder or to a high current source

cclienti/tig-welder
A DIY TIG welder that can be plugged to a traditionnal stick welder or to a high current source







PineConeMechatronics/EUPLA_CONE_CORE
Academic hardware development for the EUPLA_CONE_CORE project, including manufacturing files and sensor testing scripts.

It measures 130 × 80 mm and has 2 copper layers, 1.6 mm thick.
125 parts, built around the IR2110L4, MCP3208-BI/P, 24LC1025-I/P and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the cclienti/tig-welder repository on GitHub, at the commit this page was made from: the board is boards/pico-controller/pico-controller.kicad_pcb and its schematic boards/dspic-controller/dspic-controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).