

MotorDriverPCB
printed circuit board files stored here.
- Size
- 78.4 × 54.3 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 28
- Pads
- 90
- Tracks, vias
- 184, 29
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 23 Oct 2024
- Updated
- 11 Apr 2025
Overview
MotorDriverPCB is an open-source printed circuit board by FORWARD-Walker, from the FORWARD-Walker/FORWARD-PCB repository on GitHub. It is a 4-layer board of 78.4 × 54.3 mm with 27 parts on 28 nets, routed with 184 tracks and 29 vias.
It is built around the L298N and STTH212U. Its parts include 8 diodes, 5 connectors, 3 resistors, 1 IC and 1 transistor.
Main components
2L298N
Multiwatt-15-25℃~+130℃ 2 2A 4.5V~7V Bipolar Driver Overcurrent Protection、Over temperature protection Yes Multiwatt-15 Stepper Motor Driver ROHSHGSEMIStepper Motor DriverSTTH212U
SMB1 Independent 1.2kV 1.75V@2A 10uA@1.2kV 2A 40A 75ns SMB Fast Recovery / High Efficiency Diodes ROHSSTMicroelectronicsFast Recovery / High Efficiency Diodes
README
README.mdMAIN contains ESP-32D Wroom, sensors, and connectors to other boards. POWER contains voltage regulators and connection for AA battery pack.
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | STTH212U | Diode_SMD:D_SMB | D1, D2, D3, D4, D5, D6, D7, D8 |
| 2 | Conn_02x04_Counter_Clockwise | Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_Vertical | J2, J3 |
| 2 | Screw_Terminal_01x02 | Connector_JST:JST_XH_S2B-XH-A-1_1x02_P2.50mm_Horizontal | H1, H2 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 2N2219 | Package_TO_SOT_THT:TO-39-3 | Q1 |
| 1 | Conn_01x02_Socket | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Horizontal | J5 |
| 1 | Conn_01x03_Socket | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J4 |
| 1 | Conn_01x16_Pin | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Horizontal | J1 |
| 1 | L298N | L298N:TO127P2020X500X2100-15 | U3 |
| 1 | LOGO | Lambda:lambda | G*** |
| 1 | R_Photo | Resistor_THT:R_Box_L8.4mm_W2.5mm_P5.08mm | R1 |
| 1 | R_Potentiometer | Potentiometer_THT:Potentiometer_ACP_CA6-H2,5_Horizontal | RV1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | Lt1 |
The 23 most common of 27 parts.
More from FORWARD-Walker/FORWARD-PCB
4- 4 layers84.9 × 90.5 mm

- 2 layers105 × 74.5 mm

Pcb board b4 change sad days
FORWARD-Walker/FORWARD-PCB
printed circuit board files stored here.
43 parts1 - 4 layers72.7 × 54.3 mm

MotorDriverPCBBeforeRedesignMarch14
FORWARD-Walker/FORWARD-PCB
printed circuit board files stored here.
27 parts1 - 2 layers82.3 × 41.3 mm

Similar boards
- 2 layers130 × 80 mm

Pico controller
cclienti/tig-welder
A DIY TIG welder that can be plugged to a traditionnal stick welder or to a high current source
125 parts8GPL-3.0 - 2 layers76.1 × 85 mm

- 4 layers85 × 54 mm

PECDR
pedro-ibs/trekking
Desenvolvimento de um robô rádio-controlado/autônomo da moralidade “tracker”
68 parts9 - 2 layers66.3 × 34.3 mm

C64PSUv3
FabioNMI/C64PSU
A low-cost, lightweight and very reliable power supply for the Commodore 64
37 parts2 - 2 layers

RoboForce
Khuzhin06/RoboForce
Тогда вы не зря зашли к нам, мы постараемся максимально подробно и быстро рассказать о нашем пути создания робота на ROS2 Jazzy и esp32,по этим материалам вы с легкостью сможете повторить этот проект.
3 parts2 - 2 layers

- 2 layers127 × 117.5 mm

Diy ert
CainPatel/diy-ert
A $150 four-electrode earth resistivity meter (Wenner array): Arduino, AD620, ADS1115. Documented failure-first as an engineering log.
44 parts1MIT - 2 layers99.5 × 99.5 mm

SchematicKiCadProyect
dduarteCE/Robot-vacuum
Embedded Linux robotic vacuum system built with Yocto on Raspberry Pi 4, featuring autonomous navigation, audio playback, and remote control through a web interface.
42 parts1MIT
Questions
How big is the MotorDriverPCB PCB?
It measures 78.4 × 54.3 mm and has 4 copper layers, 1.6 mm thick.
What parts does the MotorDriverPCB use?
27 parts, built around the L298N and STTH212U. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MotorDriverPCB KiCad files?
From the FORWARD-Walker/FORWARD-PCB repository on GitHub, at the commit this page was made from: the board is FORWARD-CONTROLLER/MotorDriverPCB.kicad_pcb and its schematic FORWARD-CONTROLLER/MotorDriverPCB.kicadBefore_March_14_sch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MotorDriverPCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask FORWARD-Walker before reusing the design.