Boards using the MBR0520L-TP

34 boards

Boards in 31 GitHub repositories, designed in KiCad, that use the MBR0520L-TP by Micro Commercial Components (-65℃~+125℃ 1 Independent 20V 385mV@0.5A 5.5A 500mA 75uA@20V SOD-123 Schottky Diodes ROHS). See how each wires it, with its parts, size, README and files; the MBR0520L-TP’s symbol, footprint and pinout are on its own page.

2 layers70.9 × 45.6 mm
GsmGuard
AlexIII/gsmGuard
All-in-one Arduino GSM alarm system.
37 parts23MIT
2 layers82 × 52 mm
EmoePower V1.0
emoestudio/EmoePower
A DIY Buck-Boost Power Supply for Laboratory works and personal use, based on LM5175 and ESP32.
72 parts20GPL-3.0
2 layers54.5 × 37 mm
GPIB Serial Adapter
essele/yaugi
Yet Another USB GPIB Interface
20 parts17
4 layers160 × 99.5 mm
High Current Driver
Strathclyde-EQOP/Vernier-Current-Driver
The Vernier Current Driver is an ultra low noise, programmable, bi-polar current source. It comes in two flavours:
248 parts9CC-BY-SA-4.0
2 layers35 × 75 mm
Easyhive 1 3
jacobron/EasyHive_M0
Easyhive_M0-Board Arduino Code and Hardware Files
101 parts4
2 layers13.1 × 2.1 mm
Pieceofpwn
nutc4k3/pieceofpwn
Bad USB like with a touch of candy style.
15 parts4
2 layers60.8 × 31 mm
ES3ink
dronecz/ES3ink
This repo holds HW and SW (to be done) information for this board.
84 parts3MIT
4 layers58.4 × 62.2 mm
Daybreak mk3b
reedtaylor/daybreak_mk3
A PCB interface between the Decent Espresso DE1 and USB or Adafriuit Feather HUZZAH32 EESP32
63 parts3
4 layers85 × 85 mm
Hv pulse controller
wenzel-lab/high-voltage-pulse-generator
Custom electronics solution for microfluidic droplet sorting pulses
117 parts3
4 layers92 × 48.7 mm
ATMega Board
DoImant/KiCad-ATMega-Board
ATMega Barebone PCB. Applicable for battery powered applications. Usable microcontrollers: ATTiny88, ATmega48A/PA, 88A/PA, 168A/PA, 328/P
29 parts2CC-BY-SA-4.0
2 layers43.2 × 58.4 mm
NivelesDeNivelesSensor
notaroomba/nivelesdeniveles
An early warning application made with React Native.
6 parts2
2 layers
Circular PCB
ChowdaryManyam/ATtiny-Chainy
As an OSHWA-certified project, ATtiny-Chainy adheres to the open-source hardware definition, ensuring transparency, collaboration, and accessibility for the maker community.
24 parts1MIT
2 layers35 × 75 mm
Easyhive
easyhive/easyhive_kicad
Kicad files for PCB production of easyhive boards which are used in easyhive hive scale.
106 parts1
2 layers100.7 × 62.9 mm
Buisness Card
KenwoodFox/ProtoCard
A protoboard-buisness card combo!
35 parts1
2 layers51 × 51 mm
SuperGauge
KenwoodFox/SuperGauge
This repo contains all the firmware and hardware for the SuperGauge.
32 parts1
4 layers108.2 × 64.3 mm
Luxmètre
Korotaa/luxmetter-design_HW-PCB_SW
Le module est un End Device LoRa. C'est un dispositif IoT permettant de mesurer le niveau de luminosité grace au capteur TSL2571 et transmettre ces données à un serveur LoRaWAN (NetWork Serveur + Application Serveur) .
110 parts1
2 layers13.2 × 24.5 mm
Skye
serverwentdown/Skye
A small programmable LED keychain based on the Digispark
14 parts1
2 layers24 × 24 mm
SX1280 module
dabit20/ExpressLRS-SX1280-module
SX1280 based 2.4GHz module for the ExpressLRS radio system
50 parts
2 layers99.9 × 73.7 mm
Simple i2c screen
Hackuarium/simple-i2c-screen

42 parts
2 layers99.9 × 73.7 mm
Incubator bottom
Hackuarium/simple-incubator
The goal is to create a simple controller of temperature for an incubator.
57 parts
4 layers76 × 64 mm
EWP Control
haum2002/EWP-Control
SmartCoolingv2.1 menggabungkan firmware SmartCooling dengan reka bentuk EWP Controller ini. RP2350B kekal sebagai pengawal keselamatan dan actuator kritikal, manakala ESP32-S3 mengurus UI, Wi-Fi, BLE, diagnostik dan…
93 parts
2 layers99.3 × 78 mm
FlowerManager
HobbyFactory/PCB-Flower-Manager

115 parts
2 layers21 × 44.5 mm
Arduino nano
mryashrk/Arduino-nano-pcb-design

26 parts
2 layers43.4 × 63 mm
Tapper
rabinniroula/tapper-hw
KiCad Design Files for Tapper: A hardware tool for LF and HF RFID read, emulation and much more...
106 parts